TECHNICAL EXAMPREP COMPREHENSIVE
QUESTIONS AND VERIFIED RESPONSES
GUARANTEED TO PASS
⩥ Class B vehicles.
Answer: any trailer, including those with air brakes.
⩥ Class C vehicles.
Answer: trucks, tractors, busses, other vehicles all over 10,000 lbs.
⩥ Class D vehicles.
Answer: any combination of class b and class c vehicles.
⩥ Class F vehicles.
Answer: Fleet vehines (15 or more)
⩥ Class M vehicles.
Answer: motorcycles or other 3 wheeled vehicles, and trailers 20ft or
less without air brakes
⩥ Class R vehicles.
,Answer: Recreational motor homes and converted busses
⩥ Class T vehicles.
Answer: Any trailers up to 10,000lbs that do NOT have air brakes
⩥ Class G vehicles.
Answer: any vehicle combination of class R and class T
⩥ Operating hours.
Answer: Must be open from 8am to 4pm, Monday through Friday.
⩥ Inspector requirements.
Answer: At least 18 yrs old, minimum of 12 months auto repair
knowledge, vaild drivers license, and subject to random examinations.
⩥ Registered mechanics.
Answer: Only to be registered at one authorized inspection station full
time.
⩥ Minor repairs.
Answer: Can be done in the inspection area, as long as the area can be
readily cleared for an inspection.
, ⩥ Station must have.
Answer: a level, hard concrete or cement surface with no more than 1%
slope at any angle/direction.
⩥ Inspection bay must be.
Answer: clear of machinery, displays, benches, etc that can cause a
hazard.
⩥ Drive on lifts.
Answer: are not allowed in the inspection bay.
⩥ Inspection bays need to have.
Answer: 2 conves mirrors with a minimum diamete of 12 inches, one for
the left rear and one for the right front.
⩥ Inspection stations need to have.
Answer: drum micrometer, disc micrometer, ball joint checkers, 2 jack
stands, 1 floor jack, window tint meter, tire pressure gauge, tread depth
gauge, screwdriver, and a 25 foot measuring tape.
⩥ Ball joint checker must be able to.
Answer: take measurments in 0.001 of an inch.