Rope Rescue Ops IFSI 2026 update COMPREHENSIVE
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
All riggin shall have how many checks prior to Loading? - (ANSWERS)3
All equip. That falls 3 ft onto a hard surface shall be checked for: -
(ANSWERS)Burs, sharp edges, dirt, contaminates, lose parts and
deformaties
Rope deployed from the anchor point to the ground should be deployed: -
(ANSWERS)So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - (ANSWERS)Lighter in weight
Rope gloves shall be - (ANSWERS)Sturdy formfitting gloves with a leather
palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the
edge attendant to go over the edge and no farther - (ANSWERS)False
A class one harness is designed to stop rescuer when he: -
(ANSWERS)Reaches the edge
,Rope Rescue Ops IFSI 2026 update COMPREHENSIVE
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
T/F: Class two harnesses are designed for 600 lb loads and will not keep the
rescuer in an up-right position if they become unconscious. -
(ANSWERS)True
Class three harnesses are: - (ANSWERS)Designed to keep the rescuer or
victim in an up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on
a solid surface should lift their legs into a sitting position and avoid moving.
- (ANSWERS)True
T/F: When working in a harness with free mobility a person should keep
your legs moving as much as possible - (ANSWERS)True
T/F: A person that falls and is trapped and unable to lift their legs should
squeeze their legs legs every 5 seconds until help arrives -
(ANSWERS)True
The 1st medical consideration for a victim in a class three harness that falls
and becomes unconscious is: - (ANSWERS)Airway patency
, Rope Rescue Ops IFSI 2026 update COMPREHENSIVE
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
When a person is rescued from harness suspension they should be: -
(ANSWERS)Assessed, ABC's, immobilization and transported in a sitting
position
All harness construction and testing standards are covered in NFPA: -
(ANSWERS)1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer
all have the ability to call a stop during rope rescue operations if they see an
unsafe operation - (ANSWERS)True
A helmet used for repor rescue should be an approved light weight helmet
with a: - (ANSWERS)3 point strap position under the chin
Care and maintenance of all rescue equipment should be per: -
(ANSWERS)the helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second
rope under tension (a line) to run across the stationary rope under tension.
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
All riggin shall have how many checks prior to Loading? - (ANSWERS)3
All equip. That falls 3 ft onto a hard surface shall be checked for: -
(ANSWERS)Burs, sharp edges, dirt, contaminates, lose parts and
deformaties
Rope deployed from the anchor point to the ground should be deployed: -
(ANSWERS)So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - (ANSWERS)Lighter in weight
Rope gloves shall be - (ANSWERS)Sturdy formfitting gloves with a leather
palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the
edge attendant to go over the edge and no farther - (ANSWERS)False
A class one harness is designed to stop rescuer when he: -
(ANSWERS)Reaches the edge
,Rope Rescue Ops IFSI 2026 update COMPREHENSIVE
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
T/F: Class two harnesses are designed for 600 lb loads and will not keep the
rescuer in an up-right position if they become unconscious. -
(ANSWERS)True
Class three harnesses are: - (ANSWERS)Designed to keep the rescuer or
victim in an up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on
a solid surface should lift their legs into a sitting position and avoid moving.
- (ANSWERS)True
T/F: When working in a harness with free mobility a person should keep
your legs moving as much as possible - (ANSWERS)True
T/F: A person that falls and is trapped and unable to lift their legs should
squeeze their legs legs every 5 seconds until help arrives -
(ANSWERS)True
The 1st medical consideration for a victim in a class three harness that falls
and becomes unconscious is: - (ANSWERS)Airway patency
, Rope Rescue Ops IFSI 2026 update COMPREHENSIVE
FREQUENTLY TESTED QUESTIONS and verified |answers WITH
RATIONALES|100% accurate answers|already graded A+
When a person is rescued from harness suspension they should be: -
(ANSWERS)Assessed, ABC's, immobilization and transported in a sitting
position
All harness construction and testing standards are covered in NFPA: -
(ANSWERS)1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer
all have the ability to call a stop during rope rescue operations if they see an
unsafe operation - (ANSWERS)True
A helmet used for repor rescue should be an approved light weight helmet
with a: - (ANSWERS)3 point strap position under the chin
Care and maintenance of all rescue equipment should be per: -
(ANSWERS)the helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second
rope under tension (a line) to run across the stationary rope under tension.
