ASA 113 PRACTICE EXAM Questions
With Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A |
Instant Download Pdf
1. What is the primary purpose of an aircraft pre-flight inspection?
A. To test engine performance
B. To ensure fuel efficiency
C. To confirm aircraft airworthiness before flight
D. To calibrate instruments
Answer: C
Rationale: The pre-flight inspection is conducted to ensure the aircraft
is safe, airworthy, and free from visible defects before flight
operations begin.
2. Which of the following controls the aircraft about its longitudinal
axis?
A. Elevator
B. Rudder
C. Ailerons
D. Flaps
,Answer: C
Rationale: Ailerons control roll movement around the longitudinal
axis, allowing the aircraft to bank left or right.
3. What does ATC stand for?
A. Air Traffic Control
B. Aircraft Technical Crew
C. Aviation Training Center
D. Air Terminal Command
Answer: A
Rationale: ATC refers to Air Traffic Control, responsible for managing
aircraft movement on the ground and in controlled airspace.
4. What is the standard direction of runway numbering based on?
A. Magnetic heading
B. True north
C. Wind direction
D. Airport elevation
Answer: A
Rationale: Runways are numbered according to their magnetic
heading rounded to the nearest 10 degrees.
5. What is lift primarily generated by?
,A. Engine thrust
B. Wing shape and airflow
C. Landing gear friction
D. Aircraft weight
Answer: B
Rationale: Lift is produced by the airflow over and under the wing due
to its aerodynamic shape (airfoil).
6. What is the main function of flaps?
A. Increase stall speed
B. Increase lift and drag during landing/takeoff
C. Control yaw
D. Reduce engine power
Answer: B
Rationale: Flaps increase lift and drag, allowing slower and safer
takeoffs and landings.
7. Which force opposes thrust?
A. Lift
B. Weight
C. Drag
D. Gravity
Answer: C
, Rationale: Drag is the aerodynamic force that resists the forward
motion of the aircraft.
8. What does VFR stand for?
A. Visual Flight Rules
B. Variable Flight Response
C. Verified Flight Regulation
D. Vertical Flight Range
Answer: A
Rationale: VFR refers to Visual Flight Rules, where pilots navigate
primarily using visual references.
9. What is the purpose of a transponder?
A. Measure altitude
B. Communicate with passengers
C. Send identification and altitude to radar
D. Control fuel flow
Answer: C
Rationale: A transponder sends coded signals to ATC radar identifying
the aircraft and its altitude.
10. What is the stall condition?
A. Engine failure
B. Loss of lift due to low airspeed
With Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A |
Instant Download Pdf
1. What is the primary purpose of an aircraft pre-flight inspection?
A. To test engine performance
B. To ensure fuel efficiency
C. To confirm aircraft airworthiness before flight
D. To calibrate instruments
Answer: C
Rationale: The pre-flight inspection is conducted to ensure the aircraft
is safe, airworthy, and free from visible defects before flight
operations begin.
2. Which of the following controls the aircraft about its longitudinal
axis?
A. Elevator
B. Rudder
C. Ailerons
D. Flaps
,Answer: C
Rationale: Ailerons control roll movement around the longitudinal
axis, allowing the aircraft to bank left or right.
3. What does ATC stand for?
A. Air Traffic Control
B. Aircraft Technical Crew
C. Aviation Training Center
D. Air Terminal Command
Answer: A
Rationale: ATC refers to Air Traffic Control, responsible for managing
aircraft movement on the ground and in controlled airspace.
4. What is the standard direction of runway numbering based on?
A. Magnetic heading
B. True north
C. Wind direction
D. Airport elevation
Answer: A
Rationale: Runways are numbered according to their magnetic
heading rounded to the nearest 10 degrees.
5. What is lift primarily generated by?
,A. Engine thrust
B. Wing shape and airflow
C. Landing gear friction
D. Aircraft weight
Answer: B
Rationale: Lift is produced by the airflow over and under the wing due
to its aerodynamic shape (airfoil).
6. What is the main function of flaps?
A. Increase stall speed
B. Increase lift and drag during landing/takeoff
C. Control yaw
D. Reduce engine power
Answer: B
Rationale: Flaps increase lift and drag, allowing slower and safer
takeoffs and landings.
7. Which force opposes thrust?
A. Lift
B. Weight
C. Drag
D. Gravity
Answer: C
, Rationale: Drag is the aerodynamic force that resists the forward
motion of the aircraft.
8. What does VFR stand for?
A. Visual Flight Rules
B. Variable Flight Response
C. Verified Flight Regulation
D. Vertical Flight Range
Answer: A
Rationale: VFR refers to Visual Flight Rules, where pilots navigate
primarily using visual references.
9. What is the purpose of a transponder?
A. Measure altitude
B. Communicate with passengers
C. Send identification and altitude to radar
D. Control fuel flow
Answer: C
Rationale: A transponder sends coded signals to ATC radar identifying
the aircraft and its altitude.
10. What is the stall condition?
A. Engine failure
B. Loss of lift due to low airspeed
