NFPA 70E FINAL 2026 NEWEST EXAM
COMPLETE 60 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
An arc flash suit includes which of the following things? - CORRECT ANSWER: Hood with a
face shield
Branch-circuit overcurrent protective devices are provided with interrupung ratings appropriate
for the intended use but no less than how many amperes? - CORRECT ANSWER: 5,000
How is arc rating derived? - CORRECT ANSWER: Value of the arc thermal performance value
(ATV) or energy of breakopen threshold
How often must employers audit their electrical safety programs? - CORRECT ANSWER: Every
three years
How often should you do a visual inspection of test instruments and equipment? - CORRECT
ANSWER: Before each use
NFPA 70E provides specific information to help companies prevent exposure to which types of
hazards? - CORRECT ANSWER: Electrical
Tag attachments means must have which of the following features? - CORRECT ANSWER:
Self-locking
What do safety-related work practices require regarding cell lines? - CORRECT ANSWER: The
cell line is not grounded through the welding machine.
, What does the general duty clause of the Occupational Safety and Health Act require of
employers? - CORRECT ANSWER: Provide a workplace free from recognized hazards
What is required before employees begin a new project? - CORRECT ANSWER: Job briefing
What is the most effective method specifies in the hierarchy of risk control is? - CORRECT
ANSWER: Elimination
Where in NFPA 70E would you find information on safety-related work practices? - CORRECT
ANSWER: Part 1, Chapter 1
Which approach limit is at the point where work is the same as making contact with the live
part? - CORRECT ANSWER: Prohibited Approach Boundary
Which of the following methods can be used in selecting arc flash PPE? - CORRECT ANSWER:
Elther the incident energy analysis method or arc flash PPE categorles method can be used when
choosing PPE, but not both.
Which of the following statement is True about Barricades? - CORRECT ANSWER: Barricades
cannot be placed closer than the limited approach boundar
Which situation would be considered an electrically safe work condition? - CORRECT
ANSWER: The part has been disconnected, locked/tagged, tested, and grounded.
Who may test and troubleshoot circuit parts operating at 70 volts? - CORRECT ANSWER: Only
qualified persons
Who should be involved in the lockout/tagout process? - CORRECT ANSWER: Anyone who
could be exposed directly or indirectly to a source of electrical energy
COMPLETE 60 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
An arc flash suit includes which of the following things? - CORRECT ANSWER: Hood with a
face shield
Branch-circuit overcurrent protective devices are provided with interrupung ratings appropriate
for the intended use but no less than how many amperes? - CORRECT ANSWER: 5,000
How is arc rating derived? - CORRECT ANSWER: Value of the arc thermal performance value
(ATV) or energy of breakopen threshold
How often must employers audit their electrical safety programs? - CORRECT ANSWER: Every
three years
How often should you do a visual inspection of test instruments and equipment? - CORRECT
ANSWER: Before each use
NFPA 70E provides specific information to help companies prevent exposure to which types of
hazards? - CORRECT ANSWER: Electrical
Tag attachments means must have which of the following features? - CORRECT ANSWER:
Self-locking
What do safety-related work practices require regarding cell lines? - CORRECT ANSWER: The
cell line is not grounded through the welding machine.
, What does the general duty clause of the Occupational Safety and Health Act require of
employers? - CORRECT ANSWER: Provide a workplace free from recognized hazards
What is required before employees begin a new project? - CORRECT ANSWER: Job briefing
What is the most effective method specifies in the hierarchy of risk control is? - CORRECT
ANSWER: Elimination
Where in NFPA 70E would you find information on safety-related work practices? - CORRECT
ANSWER: Part 1, Chapter 1
Which approach limit is at the point where work is the same as making contact with the live
part? - CORRECT ANSWER: Prohibited Approach Boundary
Which of the following methods can be used in selecting arc flash PPE? - CORRECT ANSWER:
Elther the incident energy analysis method or arc flash PPE categorles method can be used when
choosing PPE, but not both.
Which of the following statement is True about Barricades? - CORRECT ANSWER: Barricades
cannot be placed closer than the limited approach boundar
Which situation would be considered an electrically safe work condition? - CORRECT
ANSWER: The part has been disconnected, locked/tagged, tested, and grounded.
Who may test and troubleshoot circuit parts operating at 70 volts? - CORRECT ANSWER: Only
qualified persons
Who should be involved in the lockout/tagout process? - CORRECT ANSWER: Anyone who
could be exposed directly or indirectly to a source of electrical energy
