NYCHA SUPERVISOR PAINTER WRITTEN EXAM LATEST 2026/2027
PRACTICE QUESTIONS AND STUDY GUIDE COMPLETE ACCURATE
EXAM ACTUAL QUESTIONS AND CORRECT DETAILED ANSWERS
WITH RATIONALES (100% EXPERT VERIFIED SOLUTIONS) LATEST
UPDATED VERSION 2026 EDITION |GUARANTEED PASS A+ (BRAND
NEW!) FULL REVISED NYCHA SUPERVISOR PAINTER WRITTEN
APPROVED EXAM
When preparing a exterior concrete wall that has been previously painted with a
lead-based paint at a NYCHA development, the FIRST step a supervisor painter
must ensure is completed is:
A. Apply a chemical stripper to remove all paint layers.
B. Conduct a risk assessment and notify all residents and workers of lead-safe
work practices. CORRECT ANSWER
C. Pressure wash the surface to remove loose paint and debris.
D. Apply a bonding primer directly over the existing paint.
Rationale: Under NYCHA and EPA lead safety regulations, any disturbance of
lead-based paint requires prior risk assessment, notification, and implementation of
lead-safe work practices (e.g., containment, PPE, cleaning methods). Pressure
washing or stripping without these steps is illegal and hazardous.
What is the maximum allowable time for a NYCHA Supervisor Painter to respond
to an emergency painting request from a tenant, according to NYCHA’s Property
Management Procedures?
A. 72 hours
B. 24 hours
C. 2 hours CORRECT ANSWER
D. 48 hours
,Rationale: NYCHA’s Emergency Work Order policy mandates a 2-hour response
time for urgent painting issues (e.g., peeling lead paint in a child-occupied room,
paint obstructing a safety device). Non-emergency work has longer timelines.
Which type of paint is most appropriate for use on radiators and hot pipes within
NYCHA residential buildings to ensure durability and safety?
A. Acrylic latex paint
B. High-temperature alkyd or silicone-based paint CORRECT ANSWER
C. Epoxy floor paint
D. Chalkboard paint
Rationale: Radiators and hot pipes require paint that withstands temperatures up to
200°F. High-temperature alkyd or silicone formulations resist cracking, peeling,
and off-gassing, unlike standard latex or epoxy.
A NYCHA supervisor notices a painter using a 6-inch roller on a large living room
wall. The supervisor should instruct the painter to:
A. Continue; it is acceptable for small touch-ups.
B. Switch to a 3-inch brush for better control.
C. Change to a 9-inch or 18-inch roller for efficiency and uniformity. CORRECT
ANSWER
D. Use a paint sprayer only.
Rationale: For large wall areas, larger roller covers (9-inch standard, 18-inch for
production) reduce lap marks and speed up work. NYCHA productivity standards
require efficient methods.
,According to OSHA 29 CFR 1926.62, what is the permissible exposure limit
(PEL) for lead in construction, which a supervisor painter must monitor on lead
abatement projects?
A. 100 µg/m³ as an 8-hour TWA
B. 30 µg/m³ as an 8-hour TWA
C. 50 µg/m³ as an 8-hour TWA CORRECT ANSWER
D. 10 µg/m³ as an 8-hour TWA
Rationale: OSHA’s lead standard for construction sets the PEL at 50 micrograms
per cubic meter of air as an 8-hour time-weighted average. Exceeding this requires
engineering controls, PPE, and medical surveillance.
When supervising a crew painting the interior of a NYCHA community center,
which personal protective equipment (PPE) is the MINIMUM requirement for
workers using oil-based paint in a poorly ventilated room?
A. Dust mask and safety glasses
B. NIOSH-approved respirator (organic vapor cartridge), gloves, and goggles
CORRECT ANSWER
C. Full-face respirator with HEPA filter only
D. No PPE if paint is low-VOC
Rationale: Oil-based paints emit volatile organic compounds (VOCs) that can
cause respiratory irritation and neurological effects. Organic vapor cartridges are
required; HEPA filters are for particulates only.
A supervisor painter is reviewing work orders and finds that a painter took 8 hours
to paint a 12’ x 12’ bedroom (walls and ceiling) with two coats. According to
NYCHA productivity benchmarks, this is:
A. Acceptable for a first-time painter.
, B. Excessive; standard time is 3-4 hours for that size. CORRECT ANSWER
C. Below standard; it should take 10 hours.
D. Correct for lead-safe work area containment.
Rationale: NYCHA productivity standards for painting average 100-150 square
feet per hour per painter for two coats. A 12’x12’ bedroom has about 500-600 sq ft
of wall+ceiling, so 3-4 hours is expected.
Before applying a new coat of latex paint over a previously oil-based painted
surface, the supervisor must ensure:
A. The surface is cleaned with water only.
B. The surface is scuff-sanded and tested with a solvent (e.g., alcohol or acetone)
to confirm adhesion. CORRECT ANSWER
C. The oil paint is completely removed using a heat gun.
D. A vinyl sealer is applied without sanding.
Rationale: Latex paint does not adhere well to glossy oil-based paint. Testing with
a solvent (rubbing alcohol) – if the paint softens, it’s latex; if not, it’s oil. Then
sanding and priming with a bonding primer are required.
What is the required height of guardrails on a scaffold that a NYCHA painting
crew will use for exterior work above 10 feet?
A. 36 inches
B. 42 inches plus midrail and toeboard CORRECT ANSWER
C. 48 inches without midrail
D. 39 inches
PRACTICE QUESTIONS AND STUDY GUIDE COMPLETE ACCURATE
EXAM ACTUAL QUESTIONS AND CORRECT DETAILED ANSWERS
WITH RATIONALES (100% EXPERT VERIFIED SOLUTIONS) LATEST
UPDATED VERSION 2026 EDITION |GUARANTEED PASS A+ (BRAND
NEW!) FULL REVISED NYCHA SUPERVISOR PAINTER WRITTEN
APPROVED EXAM
When preparing a exterior concrete wall that has been previously painted with a
lead-based paint at a NYCHA development, the FIRST step a supervisor painter
must ensure is completed is:
A. Apply a chemical stripper to remove all paint layers.
B. Conduct a risk assessment and notify all residents and workers of lead-safe
work practices. CORRECT ANSWER
C. Pressure wash the surface to remove loose paint and debris.
D. Apply a bonding primer directly over the existing paint.
Rationale: Under NYCHA and EPA lead safety regulations, any disturbance of
lead-based paint requires prior risk assessment, notification, and implementation of
lead-safe work practices (e.g., containment, PPE, cleaning methods). Pressure
washing or stripping without these steps is illegal and hazardous.
What is the maximum allowable time for a NYCHA Supervisor Painter to respond
to an emergency painting request from a tenant, according to NYCHA’s Property
Management Procedures?
A. 72 hours
B. 24 hours
C. 2 hours CORRECT ANSWER
D. 48 hours
,Rationale: NYCHA’s Emergency Work Order policy mandates a 2-hour response
time for urgent painting issues (e.g., peeling lead paint in a child-occupied room,
paint obstructing a safety device). Non-emergency work has longer timelines.
Which type of paint is most appropriate for use on radiators and hot pipes within
NYCHA residential buildings to ensure durability and safety?
A. Acrylic latex paint
B. High-temperature alkyd or silicone-based paint CORRECT ANSWER
C. Epoxy floor paint
D. Chalkboard paint
Rationale: Radiators and hot pipes require paint that withstands temperatures up to
200°F. High-temperature alkyd or silicone formulations resist cracking, peeling,
and off-gassing, unlike standard latex or epoxy.
A NYCHA supervisor notices a painter using a 6-inch roller on a large living room
wall. The supervisor should instruct the painter to:
A. Continue; it is acceptable for small touch-ups.
B. Switch to a 3-inch brush for better control.
C. Change to a 9-inch or 18-inch roller for efficiency and uniformity. CORRECT
ANSWER
D. Use a paint sprayer only.
Rationale: For large wall areas, larger roller covers (9-inch standard, 18-inch for
production) reduce lap marks and speed up work. NYCHA productivity standards
require efficient methods.
,According to OSHA 29 CFR 1926.62, what is the permissible exposure limit
(PEL) for lead in construction, which a supervisor painter must monitor on lead
abatement projects?
A. 100 µg/m³ as an 8-hour TWA
B. 30 µg/m³ as an 8-hour TWA
C. 50 µg/m³ as an 8-hour TWA CORRECT ANSWER
D. 10 µg/m³ as an 8-hour TWA
Rationale: OSHA’s lead standard for construction sets the PEL at 50 micrograms
per cubic meter of air as an 8-hour time-weighted average. Exceeding this requires
engineering controls, PPE, and medical surveillance.
When supervising a crew painting the interior of a NYCHA community center,
which personal protective equipment (PPE) is the MINIMUM requirement for
workers using oil-based paint in a poorly ventilated room?
A. Dust mask and safety glasses
B. NIOSH-approved respirator (organic vapor cartridge), gloves, and goggles
CORRECT ANSWER
C. Full-face respirator with HEPA filter only
D. No PPE if paint is low-VOC
Rationale: Oil-based paints emit volatile organic compounds (VOCs) that can
cause respiratory irritation and neurological effects. Organic vapor cartridges are
required; HEPA filters are for particulates only.
A supervisor painter is reviewing work orders and finds that a painter took 8 hours
to paint a 12’ x 12’ bedroom (walls and ceiling) with two coats. According to
NYCHA productivity benchmarks, this is:
A. Acceptable for a first-time painter.
, B. Excessive; standard time is 3-4 hours for that size. CORRECT ANSWER
C. Below standard; it should take 10 hours.
D. Correct for lead-safe work area containment.
Rationale: NYCHA productivity standards for painting average 100-150 square
feet per hour per painter for two coats. A 12’x12’ bedroom has about 500-600 sq ft
of wall+ceiling, so 3-4 hours is expected.
Before applying a new coat of latex paint over a previously oil-based painted
surface, the supervisor must ensure:
A. The surface is cleaned with water only.
B. The surface is scuff-sanded and tested with a solvent (e.g., alcohol or acetone)
to confirm adhesion. CORRECT ANSWER
C. The oil paint is completely removed using a heat gun.
D. A vinyl sealer is applied without sanding.
Rationale: Latex paint does not adhere well to glossy oil-based paint. Testing with
a solvent (rubbing alcohol) – if the paint softens, it’s latex; if not, it’s oil. Then
sanding and priming with a bonding primer are required.
What is the required height of guardrails on a scaffold that a NYCHA painting
crew will use for exterior work above 10 feet?
A. 36 inches
B. 42 inches plus midrail and toeboard CORRECT ANSWER
C. 48 inches without midrail
D. 39 inches
