Collision Repair Exam UPDATED ACTUAL Questions and
CORRECT Answers
The collision repair industry does what volume of $10 billion
business per year?
Technician A says that when two cars hit head on at 50 Technician A
mph, it is like hitting a brick wall at 100 mph. Technician
B disagrees and says that it is like hitting a brick wall at
only 50 mph. Who is correct?
An independent body shop is owned by an individual True
and does not have ties to a major auto manufacturer.
What task involves analyzing damage and calculating Estimating
how much it will cost to repair the vehicle?
Technician A says that a collision can be severe enough Both Technician A and B
to cause a total loss. Technician B says that the repairs
would be more expensive than buying another car.
Who is correct?
Body shop repairs are carried out according to the Repair order
instructions on which form?
Technician A says that a damaged vehicle does not Technician B
have to be cleaned before starting repairs. Technician B
says that wash-up will remove mud, dirt, wax, and
water-soluble contaminants that could affect the paint
job. Who is correct?
Technician A says that vehicle measurement is done to Both Technician A and B
determine the extent of major damage. Technician B
says that it is also done to determine the direction of
damage. Who is correct?
Technician A says that various types of gauges and Neither Technician A nor B
measuring devices can be used to measure vehicles
damage. Technician B says that you can compare
known good body specifications ( normal
measurements from an undamaged vehicle) with actual
body measurements on the damaged vehicle. Who is
correct?
Technician A says that a frame rack can be used to do a Technician B
wheel alignment. Technician B says that a frame rack
uses mechanical power to pull or force the frame or
body back into its original position. Who is correct?
, Technician A says that panel replacement involves Both Technician A and B
removing a panel or body part that is too badly
damaged to be fixed. The new part would have to be
bolted or welded in place on the vehicle. This takes
considerable skill. Technician B says that structural
panel replacement involves welding a new panel in
place of the old, damaged one. Who is correct?
Technician A says that panel straightening involves Both Technician A and B
using various hand tools and equipment to force the
panel back into its original shape. Technician B says that
body hammers, body filler, and sanders are a few of the
tools and materials used to fix panel damage. Who is
correct?
_______ ______ _____ requires that only a few parts be Minor Body Damage
replaced or repaired before being refinished or
painted.
_____ _____ _____ must usually be corrected by replacing, Major Body Damage
repairing, and straightening large body parts before
refinishing.
A collision can also be severe enough to cause a ______ Total Loss
____, in which repairs would be more expensive than
buying another car.
Repair instructions are summarized on a printer ___________ Repair Order
(R0) and the repairs are carried out according to these
instructions.
Which type of vehicle construction uses a frame only in Semi-unitized stub rail construction
areas requiring extra support and a strong attachment
point?
The strength of a unitized vehicle is based on ___. Shape and design of component
Which of the following is not an advantage of unitized Localized collision damage to components
vehicle design?
Which of the following mechanical components are All of them
commonly found on newer unitized constructed
vehicles? Macpherson strut suspensions, Rack-and-
pinion steering, or Front-wheel drive.
In front-engine, rear-wheel drive unitized vehicles, the Longitudinally
engine is mounted ___.
The ___ are the large, side body sections that extend Quarter panels
from the side doors back to the rear bumper. They are
welded in place and form a vital part of the rear body
structure.
___ construction uses body parts welded together to Unibody
form an integral frame.
CORRECT Answers
The collision repair industry does what volume of $10 billion
business per year?
Technician A says that when two cars hit head on at 50 Technician A
mph, it is like hitting a brick wall at 100 mph. Technician
B disagrees and says that it is like hitting a brick wall at
only 50 mph. Who is correct?
An independent body shop is owned by an individual True
and does not have ties to a major auto manufacturer.
What task involves analyzing damage and calculating Estimating
how much it will cost to repair the vehicle?
Technician A says that a collision can be severe enough Both Technician A and B
to cause a total loss. Technician B says that the repairs
would be more expensive than buying another car.
Who is correct?
Body shop repairs are carried out according to the Repair order
instructions on which form?
Technician A says that a damaged vehicle does not Technician B
have to be cleaned before starting repairs. Technician B
says that wash-up will remove mud, dirt, wax, and
water-soluble contaminants that could affect the paint
job. Who is correct?
Technician A says that vehicle measurement is done to Both Technician A and B
determine the extent of major damage. Technician B
says that it is also done to determine the direction of
damage. Who is correct?
Technician A says that various types of gauges and Neither Technician A nor B
measuring devices can be used to measure vehicles
damage. Technician B says that you can compare
known good body specifications ( normal
measurements from an undamaged vehicle) with actual
body measurements on the damaged vehicle. Who is
correct?
Technician A says that a frame rack can be used to do a Technician B
wheel alignment. Technician B says that a frame rack
uses mechanical power to pull or force the frame or
body back into its original position. Who is correct?
, Technician A says that panel replacement involves Both Technician A and B
removing a panel or body part that is too badly
damaged to be fixed. The new part would have to be
bolted or welded in place on the vehicle. This takes
considerable skill. Technician B says that structural
panel replacement involves welding a new panel in
place of the old, damaged one. Who is correct?
Technician A says that panel straightening involves Both Technician A and B
using various hand tools and equipment to force the
panel back into its original shape. Technician B says that
body hammers, body filler, and sanders are a few of the
tools and materials used to fix panel damage. Who is
correct?
_______ ______ _____ requires that only a few parts be Minor Body Damage
replaced or repaired before being refinished or
painted.
_____ _____ _____ must usually be corrected by replacing, Major Body Damage
repairing, and straightening large body parts before
refinishing.
A collision can also be severe enough to cause a ______ Total Loss
____, in which repairs would be more expensive than
buying another car.
Repair instructions are summarized on a printer ___________ Repair Order
(R0) and the repairs are carried out according to these
instructions.
Which type of vehicle construction uses a frame only in Semi-unitized stub rail construction
areas requiring extra support and a strong attachment
point?
The strength of a unitized vehicle is based on ___. Shape and design of component
Which of the following is not an advantage of unitized Localized collision damage to components
vehicle design?
Which of the following mechanical components are All of them
commonly found on newer unitized constructed
vehicles? Macpherson strut suspensions, Rack-and-
pinion steering, or Front-wheel drive.
In front-engine, rear-wheel drive unitized vehicles, the Longitudinally
engine is mounted ___.
The ___ are the large, side body sections that extend Quarter panels
from the side doors back to the rear bumper. They are
welded in place and form a vital part of the rear body
structure.
___ construction uses body parts welded together to Unibody
form an integral frame.
