When does the fire department's authority end on a fire a) When the scene is left Or d) When the scene is turned over to law enforcement
scene?
a) When the scene is left
b) After property is formally released
c) When the incident commander clears all units
d) When the scene is turned over to law enforcement
Follow proper procedures for reporting a tool problem and c) Taking a tool out of service
a) Disbursing tools
b) Recommending a tool
c) Taking a tool out of service
d) Shipping a tool to the manufacturer
The N in LUNAR stand for d) Name
a) Number of victims
b) Number of fire fighters
c) Needed resources
d) Name
Vibrations or additional weight near a trench rescue d) Secondary
incident increases the probability of a (blank) collapse.
a) Initial
b) Primary
c) Principal
d) Secondary
,When approaching a flammable liquid or gas fire, what a) Uphill and upwind form any spreading fuel
would be an ideal safe location for retreat?
a) Uphill and upwind form any spreading fuel
b) Downhill and downwind from any spreading fuel
c) Any direction, as long as it is 50 feet (15m) from the fire
d) Any direction, as long as it is 100 feet (30 m) from the
fire
What type of sprinkler head uses a plunger and a small d) Chemical pellet
capsule to hold the cap in place?
a) Deluge
b) Fusible link
c) Frangible bulb
d) Chemical pellet
When maintaining portable lighting equipment, if you need d) Wear leather gloves to avoid being burned
to replace a light bulb immediately after shut off, you should
a) Spray a little water to cool it off
b) Wear medical gloves to enhance dexterity
c) Use a small fan to cool the lightbulb faster
d) Wear leather gloves to avoid being burned
A(n) (blank) foam is synthetic based and is particularly d) Aqueous film forming
suitable for spill related fires involving gasoline and light
hydrocarbon fires
a) Protein
b) Alcohol
c) Fluoroprotein
d) Aqueous film forming
,Class A foams are formulated to be mixed with water I b) 1
rations from 0.1 percent to (blank)
percent
a) 0.5
b) 1
c) 3
d) 6
In addition to extinguishing fires involving flammable and b) Suppress vapors from spills
combustible liquids, Class B foam is used to
a) Extinguish class A fires
b) Suppress vapors from spills
c) Attack fires involving electrical utilities
d) Provide a protective barrier to firefighters during vehicle
extrication
At a technical rescue incident involving an elevator, which a) Support the technical rescue team
action would a Fire Fighter Il be qualified to take?
a) Support the technical rescue team
b) Remove occupants as quickly as possible
c) Enter the elevator car to rescue occupants
d) Release the pressure in the elevator hydraulic system
Foam is produced by mixing foam concentrate with (blank) b) Water
to produce a solution
a) Air
b) Water
c) Air and water
d) Air and steam
, The (blank) post from the sides of the vehicle's windshield a) A
a) A
b) B
c) C
d) D
What are two types of vehicle frames most commonly c) Unibody and body-over-frame
found in today's motor vehicles/
a) Post and beam
b) Fixed and support
c) Unibody and body-over-frame
d) Bonded and nonbonded
(Blank) should be the highest priority, depending on the a) Life safety
type and size of the leak, an evacuation might be
necessary
a) Life safety
b) Property conservation
c) Incident stabilization
d) Fire extinguishment
When completing incident reports b) Your organization will determine which coding system you will use
a) You must include notes from all on-scene personnel
b) Your organization will determine which coding system
you will use
c) You must adhere to all coding procedures in both NFIRS
and NFPA 901
d) You must partner with another firefighter so that all
material is checked twice
scene?
a) When the scene is left
b) After property is formally released
c) When the incident commander clears all units
d) When the scene is turned over to law enforcement
Follow proper procedures for reporting a tool problem and c) Taking a tool out of service
a) Disbursing tools
b) Recommending a tool
c) Taking a tool out of service
d) Shipping a tool to the manufacturer
The N in LUNAR stand for d) Name
a) Number of victims
b) Number of fire fighters
c) Needed resources
d) Name
Vibrations or additional weight near a trench rescue d) Secondary
incident increases the probability of a (blank) collapse.
a) Initial
b) Primary
c) Principal
d) Secondary
,When approaching a flammable liquid or gas fire, what a) Uphill and upwind form any spreading fuel
would be an ideal safe location for retreat?
a) Uphill and upwind form any spreading fuel
b) Downhill and downwind from any spreading fuel
c) Any direction, as long as it is 50 feet (15m) from the fire
d) Any direction, as long as it is 100 feet (30 m) from the
fire
What type of sprinkler head uses a plunger and a small d) Chemical pellet
capsule to hold the cap in place?
a) Deluge
b) Fusible link
c) Frangible bulb
d) Chemical pellet
When maintaining portable lighting equipment, if you need d) Wear leather gloves to avoid being burned
to replace a light bulb immediately after shut off, you should
a) Spray a little water to cool it off
b) Wear medical gloves to enhance dexterity
c) Use a small fan to cool the lightbulb faster
d) Wear leather gloves to avoid being burned
A(n) (blank) foam is synthetic based and is particularly d) Aqueous film forming
suitable for spill related fires involving gasoline and light
hydrocarbon fires
a) Protein
b) Alcohol
c) Fluoroprotein
d) Aqueous film forming
,Class A foams are formulated to be mixed with water I b) 1
rations from 0.1 percent to (blank)
percent
a) 0.5
b) 1
c) 3
d) 6
In addition to extinguishing fires involving flammable and b) Suppress vapors from spills
combustible liquids, Class B foam is used to
a) Extinguish class A fires
b) Suppress vapors from spills
c) Attack fires involving electrical utilities
d) Provide a protective barrier to firefighters during vehicle
extrication
At a technical rescue incident involving an elevator, which a) Support the technical rescue team
action would a Fire Fighter Il be qualified to take?
a) Support the technical rescue team
b) Remove occupants as quickly as possible
c) Enter the elevator car to rescue occupants
d) Release the pressure in the elevator hydraulic system
Foam is produced by mixing foam concentrate with (blank) b) Water
to produce a solution
a) Air
b) Water
c) Air and water
d) Air and steam
, The (blank) post from the sides of the vehicle's windshield a) A
a) A
b) B
c) C
d) D
What are two types of vehicle frames most commonly c) Unibody and body-over-frame
found in today's motor vehicles/
a) Post and beam
b) Fixed and support
c) Unibody and body-over-frame
d) Bonded and nonbonded
(Blank) should be the highest priority, depending on the a) Life safety
type and size of the leak, an evacuation might be
necessary
a) Life safety
b) Property conservation
c) Incident stabilization
d) Fire extinguishment
When completing incident reports b) Your organization will determine which coding system you will use
a) You must include notes from all on-scene personnel
b) Your organization will determine which coding system
you will use
c) You must adhere to all coding procedures in both NFIRS
and NFPA 901
d) You must partner with another firefighter so that all
material is checked twice
