Yamaha Inline/V Motor Outboard Review
Test Practice 2026 Guide
1. what does the X represent in the model number A.25 in shaft length
150/250
A. 25in Shaft length
B. Remote control model
C. It is a 1999 year model
D. 20in Shaft length
2. Which of the follow represents a complete PID D.6AUKL1000263
A.T9.9XPHB
B.F9.9ELR266N
C.6AUK1002325
D.6AUKL1000263
3. What is a Essential tool A. Tools to properly service
A. Tools to properly service Yamaha products/sent to yamaha products/sent to
dealers dealers
B. Optional tools dealers can purchase
C. Tools strictly used for powerhead repairs
D. Upgraded diagnostic software available from K&L
tool company
4. Current models codes use the letter M after the shaft D. starting method
length. What does it represent?
A. prop shaft horsepower
B. shaft length
C. White version
D. Starting method
5. When you see O.L. displayed on the DMM what does C. the circuit being tested
this mean? is not complete/infinite re-
A. the circuit being tested in grounded sistance
B. the circuit being tested in overloaded with continu-
, Yamaha Inline/V Motor Outboard Review
Test Practice 2026 Guide
ity
C. the circuit being tested is not complete/infinite re-
sistance
D. the circuit being tested has continuity
6. Early model codes used the letter H after the shaft C. Control method
lengh, what does it represent
A. model year
B. prop shaft horsepower
C. control method
D. starting method
7. When checking for resistance, the dmm should be set B. Ohms
to
A. 300Mv
B. Ohms
C. Amps
D. Volts
8. identify the engine that uses model code F150LEB D. 4 Stroke,20" Shaft
A. 2-Stroke,15" Shaft length,150 hp, Manual start, tiller Length, 150hp, Electric
handle Start, Remote control
B. 4 Stoke 150hp, 20in shaft length, power tilt & electric
start, remote control
C.4-Stroke,150hp, 20" Shaft length, manual start, re-
mote control
D.4-Stroke,20" Shaft Length, Electric Start, Remote
Control
9. The maintenance cycle in the charts assumes D. 100
hours per year usage.
A. Charts only recommend service. The interval is up to
the customer.
Test Practice 2026 Guide
1. what does the X represent in the model number A.25 in shaft length
150/250
A. 25in Shaft length
B. Remote control model
C. It is a 1999 year model
D. 20in Shaft length
2. Which of the follow represents a complete PID D.6AUKL1000263
A.T9.9XPHB
B.F9.9ELR266N
C.6AUK1002325
D.6AUKL1000263
3. What is a Essential tool A. Tools to properly service
A. Tools to properly service Yamaha products/sent to yamaha products/sent to
dealers dealers
B. Optional tools dealers can purchase
C. Tools strictly used for powerhead repairs
D. Upgraded diagnostic software available from K&L
tool company
4. Current models codes use the letter M after the shaft D. starting method
length. What does it represent?
A. prop shaft horsepower
B. shaft length
C. White version
D. Starting method
5. When you see O.L. displayed on the DMM what does C. the circuit being tested
this mean? is not complete/infinite re-
A. the circuit being tested in grounded sistance
B. the circuit being tested in overloaded with continu-
, Yamaha Inline/V Motor Outboard Review
Test Practice 2026 Guide
ity
C. the circuit being tested is not complete/infinite re-
sistance
D. the circuit being tested has continuity
6. Early model codes used the letter H after the shaft C. Control method
lengh, what does it represent
A. model year
B. prop shaft horsepower
C. control method
D. starting method
7. When checking for resistance, the dmm should be set B. Ohms
to
A. 300Mv
B. Ohms
C. Amps
D. Volts
8. identify the engine that uses model code F150LEB D. 4 Stroke,20" Shaft
A. 2-Stroke,15" Shaft length,150 hp, Manual start, tiller Length, 150hp, Electric
handle Start, Remote control
B. 4 Stoke 150hp, 20in shaft length, power tilt & electric
start, remote control
C.4-Stroke,150hp, 20" Shaft length, manual start, re-
mote control
D.4-Stroke,20" Shaft Length, Electric Start, Remote
Control
9. The maintenance cycle in the charts assumes D. 100
hours per year usage.
A. Charts only recommend service. The interval is up to
the customer.
