ICC BOLTING 150 CERTIFICATION
PREPARATION 2026 REVIEW SHEET SOLVED
QUESTIONS GUARANTEED PASS
◉ The statement of special inspections must include.
Answer: the list of the materials and the work requiring special
inspection, identification of each inspection as continuous, periodic
9 or other0 and the inspections to be performed
◉ Periodic inspection is.
Answer: part time or intermittent observation of the work (
intermittently present where the work to be inspected has been or is
being performed
◉ Continuous special inspection means.
Answer: the inspector is onsite observing the work requiring special
inspection( present when and where the work to be inspected is
being performed)
◉ The special inspector is be employed by.
Answer: the owner and the engineer
,◉ The special inspector must be qualified and demonstrate
competence to the satisfaction of.
Answer: the building official
◉ Special inspections ay be waived by the building official if.
Answer: the construction is of a minor nature
◉ A fabricated item is.
Answer: structural, load bearing assemblies of materials assembled
prior to the installation in the building
◉ To be an approved agency.
Answer: it must be independent, and disclose possible conflicts of
interest, it must have adequate equipment to perform he required
tests, it must have personnel educated and experienced in
conducting the required inspections and tests
◉ The special inspector is to.
Answer: submit reports to the Building official and the engineer,
report discrepancies in construction from the approved construction
documents to the contractor, bring uncorrected discrepancies to the
attention of the building official and the engineer
◉ To become an approved fabricator, the fabricator must have.
, Answer: a written fabrication procedural manual and quality control
manual, a review of their written procedural and quality control
manuals by an approved agency, periodic auditing of their plant by
an approved agency
◉ Special inspection of work performed at a fabricators shop is
waived provided:.
Answer: the fabricator is registered and approved by the building
official to do the work without special inspection and the fabricator
submits a certificate of compliance upon completion of the work
◉ If no welding, cutting or heating is performed as a part of the steel
fabrication:.
Answer: o special inspection of fabrication is required, but the
fabricator must submit and implement a procedure for material
control
◉ The tops of anchor bolts must be.
Answer: a least flush with the top of the nut
◉ Except for certain types and sizes of welds, inspection of
structural welding is to be done.
Answer: during the welding operations
PREPARATION 2026 REVIEW SHEET SOLVED
QUESTIONS GUARANTEED PASS
◉ The statement of special inspections must include.
Answer: the list of the materials and the work requiring special
inspection, identification of each inspection as continuous, periodic
9 or other0 and the inspections to be performed
◉ Periodic inspection is.
Answer: part time or intermittent observation of the work (
intermittently present where the work to be inspected has been or is
being performed
◉ Continuous special inspection means.
Answer: the inspector is onsite observing the work requiring special
inspection( present when and where the work to be inspected is
being performed)
◉ The special inspector is be employed by.
Answer: the owner and the engineer
,◉ The special inspector must be qualified and demonstrate
competence to the satisfaction of.
Answer: the building official
◉ Special inspections ay be waived by the building official if.
Answer: the construction is of a minor nature
◉ A fabricated item is.
Answer: structural, load bearing assemblies of materials assembled
prior to the installation in the building
◉ To be an approved agency.
Answer: it must be independent, and disclose possible conflicts of
interest, it must have adequate equipment to perform he required
tests, it must have personnel educated and experienced in
conducting the required inspections and tests
◉ The special inspector is to.
Answer: submit reports to the Building official and the engineer,
report discrepancies in construction from the approved construction
documents to the contractor, bring uncorrected discrepancies to the
attention of the building official and the engineer
◉ To become an approved fabricator, the fabricator must have.
, Answer: a written fabrication procedural manual and quality control
manual, a review of their written procedural and quality control
manuals by an approved agency, periodic auditing of their plant by
an approved agency
◉ Special inspection of work performed at a fabricators shop is
waived provided:.
Answer: the fabricator is registered and approved by the building
official to do the work without special inspection and the fabricator
submits a certificate of compliance upon completion of the work
◉ If no welding, cutting or heating is performed as a part of the steel
fabrication:.
Answer: o special inspection of fabrication is required, but the
fabricator must submit and implement a procedure for material
control
◉ The tops of anchor bolts must be.
Answer: a least flush with the top of the nut
◉ Except for certain types and sizes of welds, inspection of
structural welding is to be done.
Answer: during the welding operations
