RISK ASSESSMENT TECHNICIAN PRACTICE
EXAM Questions With Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary goal of risk assessment in the workplace?
A. To eliminate all hazards immediately
B. To identify and evaluate risks to reduce harm
C. To increase productivity only
D. To assign blame for accidents
Correct Answer: B
Rationale: Risk assessment focuses on identifying hazards and
evaluating risks so they can be controlled or minimized, not
eliminating all hazards or assigning blame.
2. Which term best describes a potential source of harm?
A. Risk
B. Hazard
C. Control measure
D. Incident
Correct Answer: B
Rationale: A hazard is anything with the potential to cause harm,
injury, or damage.
,3. Risk is best defined as:
A. The likelihood of a hazard causing harm and its severity
B. The number of workers in a workplace
C. A type of safety equipment
D. A legal document
Correct Answer: A
Rationale: Risk combines the likelihood and severity of harm from
a hazard.
4. What is the first step in the risk assessment process?
A. Implement controls
B. Identify hazards
C. Review documentation
D. Train workers
Correct Answer: B
Rationale: The first step is always identifying hazards in the
workplace.
5. Which of the following is an example of a physical hazard?
A. Stress
B. Chemicals
C. Noise
D. Fatigue
Correct Answer: C
Rationale: Noise is a physical hazard as it can cause hearing
damage.
,6. Who is primarily responsible for workplace risk assessments?
A. Employees only
B. Government inspectors
C. Employers and safety officers
D. Customers
Correct Answer: C
Rationale: Employers and designated safety personnel are
responsible for conducting risk assessments.
7. A risk matrix is used to:
A. Punish unsafe workers
B. Store safety equipment
C. Evaluate risk level based on likelihood and severity
D. Replace safety training
Correct Answer: C
Rationale: A risk matrix helps categorize risk based on probability
and impact.
8. Which control measure is most effective in the hierarchy of
controls?
A. PPE
B. Administrative controls
C. Elimination
D. Warning signs
Correct Answer: C
Rationale: Elimination removes the hazard completely, making it
the most effective control.
, 9. What does PPE stand for?
A. Personal Protective Equipment
B. Public Protection Equipment
C. Professional Protective Evaluation
D. Primary Prevention Equipment
Correct Answer: A
Rationale: PPE refers to equipment worn to minimize exposure to
hazards.
10. Which of the following is a biological hazard?
A. Slippery floor
B. Bacteria
C. Loud machinery
D. Radiation
Correct Answer: B
Rationale: Bacteria are biological hazards that can cause disease.
11. Risk control measures should be:
A. Randomly selected
B. Based on hazard severity and likelihood
C. Based on employee preference
D. Ignored if expensive
Correct Answer: B
Rationale: Controls are selected based on risk level evaluation.
EXAM Questions With Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary goal of risk assessment in the workplace?
A. To eliminate all hazards immediately
B. To identify and evaluate risks to reduce harm
C. To increase productivity only
D. To assign blame for accidents
Correct Answer: B
Rationale: Risk assessment focuses on identifying hazards and
evaluating risks so they can be controlled or minimized, not
eliminating all hazards or assigning blame.
2. Which term best describes a potential source of harm?
A. Risk
B. Hazard
C. Control measure
D. Incident
Correct Answer: B
Rationale: A hazard is anything with the potential to cause harm,
injury, or damage.
,3. Risk is best defined as:
A. The likelihood of a hazard causing harm and its severity
B. The number of workers in a workplace
C. A type of safety equipment
D. A legal document
Correct Answer: A
Rationale: Risk combines the likelihood and severity of harm from
a hazard.
4. What is the first step in the risk assessment process?
A. Implement controls
B. Identify hazards
C. Review documentation
D. Train workers
Correct Answer: B
Rationale: The first step is always identifying hazards in the
workplace.
5. Which of the following is an example of a physical hazard?
A. Stress
B. Chemicals
C. Noise
D. Fatigue
Correct Answer: C
Rationale: Noise is a physical hazard as it can cause hearing
damage.
,6. Who is primarily responsible for workplace risk assessments?
A. Employees only
B. Government inspectors
C. Employers and safety officers
D. Customers
Correct Answer: C
Rationale: Employers and designated safety personnel are
responsible for conducting risk assessments.
7. A risk matrix is used to:
A. Punish unsafe workers
B. Store safety equipment
C. Evaluate risk level based on likelihood and severity
D. Replace safety training
Correct Answer: C
Rationale: A risk matrix helps categorize risk based on probability
and impact.
8. Which control measure is most effective in the hierarchy of
controls?
A. PPE
B. Administrative controls
C. Elimination
D. Warning signs
Correct Answer: C
Rationale: Elimination removes the hazard completely, making it
the most effective control.
, 9. What does PPE stand for?
A. Personal Protective Equipment
B. Public Protection Equipment
C. Professional Protective Evaluation
D. Primary Prevention Equipment
Correct Answer: A
Rationale: PPE refers to equipment worn to minimize exposure to
hazards.
10. Which of the following is a biological hazard?
A. Slippery floor
B. Bacteria
C. Loud machinery
D. Radiation
Correct Answer: B
Rationale: Bacteria are biological hazards that can cause disease.
11. Risk control measures should be:
A. Randomly selected
B. Based on hazard severity and likelihood
C. Based on employee preference
D. Ignored if expensive
Correct Answer: B
Rationale: Controls are selected based on risk level evaluation.
