Arizona Electrician
Arizona Electrician License Exam
cert actual passed possible
questions and answers 2024
NEC Article ______ defines breakers and fuses. - Correct answer According to NEC
Article 100, a device that opens and closes a circuit by nonautomatic means
automatically closes for a predetermined overcurrent.
Annex _____ of NEC covers conduit fill. - Correct answer Annex C of NEC covers
conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - Correct answer True
- NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - Correct answer A
receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a NEMA-5-
15P or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - Correct answer The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer
than three current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - Correct answer The fill of
metal boxes appears in NEC Tables 314.6 A and B.
NEC Article _____ address EMT. - Correct answer NEC Article 358 covers EMT.
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
,Arizona Electrician
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
Correct answer NEC Articles 342, 344, and 358 outline the installation requirements
of RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - Correct answer Shows in two columns
(milimeters and inches), how many wires in trade size you can place in a box.
What NEC table would you go to to find trade size of conduit and raceway size? -
Correct answer Chapter 9, Table 4 outlines trade size of conduit as well as raceway
size.
NEC Articles _____ and _____ covers metallic and non-metallic raceways in buildings.
- Correct answer NEC Article 386 covers metallic or metal raceway; NEC Article 388
covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article?
- Correct answer NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is _____ inches. - Correct answer
A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - Correct answer
According to new codes, ARC fault protection is needed many additional parts of the
house.
A 12-foot hallway requires one receptacle to meet code. (True or False) - Correct
answer True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - Correct answer Definitions
The main ground on a service is a(n) _____. - Correct answer Ground Rod
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
, Arizona Electrician
What does NEC Section 250-28A require? - Correct answer A main bonding jumper
and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main
bonding jumper. (True or False) - Correct answer True
A bonding screw is what color? - Correct answer A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - Correct answer False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
Correct answer 1. Bonding jumper is sized not less than 12.5% of the largest phase
conductor.
2.Based on the largest ungrounded service conductor.
3.Based on the largest sum of the service conductors.
NEC Table _____ covers grounding electrode conductor sizing. - Correct answer NEC
Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in
amps? - Correct answer NEC Tables Annex C1 and C2 identify both wire sizing and
the temperature a wire can handle in amps.
Define a grounding system according to NEC. - Correct answer A gounding system is
connected to the ground or to a conductive body that extends the ground
connection.
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
Arizona Electrician License Exam
cert actual passed possible
questions and answers 2024
NEC Article ______ defines breakers and fuses. - Correct answer According to NEC
Article 100, a device that opens and closes a circuit by nonautomatic means
automatically closes for a predetermined overcurrent.
Annex _____ of NEC covers conduit fill. - Correct answer Annex C of NEC covers
conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - Correct answer True
- NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - Correct answer A
receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a NEMA-5-
15P or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - Correct answer The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer
than three current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - Correct answer The fill of
metal boxes appears in NEC Tables 314.6 A and B.
NEC Article _____ address EMT. - Correct answer NEC Article 358 covers EMT.
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
,Arizona Electrician
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
Correct answer NEC Articles 342, 344, and 358 outline the installation requirements
of RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - Correct answer Shows in two columns
(milimeters and inches), how many wires in trade size you can place in a box.
What NEC table would you go to to find trade size of conduit and raceway size? -
Correct answer Chapter 9, Table 4 outlines trade size of conduit as well as raceway
size.
NEC Articles _____ and _____ covers metallic and non-metallic raceways in buildings.
- Correct answer NEC Article 386 covers metallic or metal raceway; NEC Article 388
covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article?
- Correct answer NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is _____ inches. - Correct answer
A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - Correct answer
According to new codes, ARC fault protection is needed many additional parts of the
house.
A 12-foot hallway requires one receptacle to meet code. (True or False) - Correct
answer True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - Correct answer Definitions
The main ground on a service is a(n) _____. - Correct answer Ground Rod
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
, Arizona Electrician
What does NEC Section 250-28A require? - Correct answer A main bonding jumper
and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main
bonding jumper. (True or False) - Correct answer True
A bonding screw is what color? - Correct answer A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - Correct answer False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
Correct answer 1. Bonding jumper is sized not less than 12.5% of the largest phase
conductor.
2.Based on the largest ungrounded service conductor.
3.Based on the largest sum of the service conductors.
NEC Table _____ covers grounding electrode conductor sizing. - Correct answer NEC
Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in
amps? - Correct answer NEC Tables Annex C1 and C2 identify both wire sizing and
the temperature a wire can handle in amps.
Define a grounding system according to NEC. - Correct answer A gounding system is
connected to the ground or to a conductive body that extends the ground
connection.
Arizona Electrician License Exam cert actual passed possible questions and answers 2024
