Fdny p-99 c Practice Exam With Verified
Questions fully solved | Latest Update
2026 | Already Graded A+ | Guaranteed
Pass | Brand New Version!!!!!
What is a general requirement of the location of the installation of a boiler? - CORRECTANSWER
Adequate clearance from combustile construction
What temperature must the materials remain under during combustion? - CORRECTANSWER
170 degrees
What is a requirement for the access of the boiler? - CORRECTANSWER Access for operation and
maintenance must not be hazardous
What is required upon installation to operate a boiler? - CORRECTANSWER Inspection and test
resulting in equipment use permit from commissioner
How often should a boiler be inspected? - CORRECTANSWER Once a year
What documentation is required from a certificate holder? - CORRECTANSWER Owners annual
statement
What is required to hydrostatically test upon installation and who should perform these tests? -
CORRECTANSWER Liquid fuel piping and fuel oil storage tanks by the installing contractor
, At what pressure should piping be tested? - CORRECTANSWER 1/2 max working pressure but
less than pressure required for storage tank
At what pressure should oil storage tanks be tested? - CORRECTANSWER At 1 1/2x max working
pressure but never < 25 psi
How long should hydrostatic pressure be maintained? - CORRECTANSWER Until all joints and
connections are inspected for leaks and at 30 minutes have passed
Who is responsible for testing gas distribution piping? - CORRECTANSWER Installing contractor
before closing and operation
What is described on instruction cards and where are they located? - CORRECTANSWER Care
and operation of oil burner located near the equipment.
What type of burners require a C of F holder to operate them? - CORRECTANSWER Any boiler
that is not automatic or requires preheating.
What is the license holder responsible for after repair? - CORRECTANSWER Inspecting the
repairs, and functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air pollution control code?
- CORRECTANSWER All burners fire with solid, liquid, or gas. Including rubbish
burners/incinerators.
What temperature are the products of combustion upon exit in low temperature equipment? -
CORRECTANSWER Less than 600 degrees
Questions fully solved | Latest Update
2026 | Already Graded A+ | Guaranteed
Pass | Brand New Version!!!!!
What is a general requirement of the location of the installation of a boiler? - CORRECTANSWER
Adequate clearance from combustile construction
What temperature must the materials remain under during combustion? - CORRECTANSWER
170 degrees
What is a requirement for the access of the boiler? - CORRECTANSWER Access for operation and
maintenance must not be hazardous
What is required upon installation to operate a boiler? - CORRECTANSWER Inspection and test
resulting in equipment use permit from commissioner
How often should a boiler be inspected? - CORRECTANSWER Once a year
What documentation is required from a certificate holder? - CORRECTANSWER Owners annual
statement
What is required to hydrostatically test upon installation and who should perform these tests? -
CORRECTANSWER Liquid fuel piping and fuel oil storage tanks by the installing contractor
, At what pressure should piping be tested? - CORRECTANSWER 1/2 max working pressure but
less than pressure required for storage tank
At what pressure should oil storage tanks be tested? - CORRECTANSWER At 1 1/2x max working
pressure but never < 25 psi
How long should hydrostatic pressure be maintained? - CORRECTANSWER Until all joints and
connections are inspected for leaks and at 30 minutes have passed
Who is responsible for testing gas distribution piping? - CORRECTANSWER Installing contractor
before closing and operation
What is described on instruction cards and where are they located? - CORRECTANSWER Care
and operation of oil burner located near the equipment.
What type of burners require a C of F holder to operate them? - CORRECTANSWER Any boiler
that is not automatic or requires preheating.
What is the license holder responsible for after repair? - CORRECTANSWER Inspecting the
repairs, and functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air pollution control code?
- CORRECTANSWER All burners fire with solid, liquid, or gas. Including rubbish
burners/incinerators.
What temperature are the products of combustion upon exit in low temperature equipment? -
CORRECTANSWER Less than 600 degrees
