NCCCO CORE PREP TEST
ALTERNATE 2026 TEST BANK
REVIEW COMPLETE QUESTIONS
SOLUTIONS A+
◉ What keeps the book or outriggers from collapsing if a hydraulic
pressure hose is compromised.
Answer: One way check valve
◉ When is it permissible for a person to be unsafe tied in a personnel
basket.
Answer: Over water
◉ Upon arrival on a new job site with a crane, what is the primary major
concern.
Answer: Underground utilities
◉ What is the minimum distance allowed from rear counterweight
swing to a wall or earth.
Answer: 2 feet
◉ What is the minimum distance you may set up to an open excavation
on average soil.
Answer: At least 1 times the trench depth to the fulcrum point or tipping
axis
, ◉ What is a car body?.
Answer: The lower portion of a crane
◉ Which statement best describes the importance of OSHA 1926.1400
places on manufactures instructions, specifications, and limitations?.
Answer: They should be followed exactly as the law
◉ According to OSHA 1926.1422 where must hand signals be posted.
Answer: On the crane or near hoisting operations
◉ According to OSHA 1910.180 how accurate must the load weight be
when making picks in the structural portion of the load chart?.
Answer: plus or minus 10%
◉ According to OSHA 1910.180 are cranes allowed to be overloaded?.
Answer: Yes, but only during testing and not over 110% of capacity
◉ According to ASME B30.5 when setting outriggers the crane should
be raised to.
Answer: Get the tires free of crane weight
◉ What does ASME B30.5 say about the amount of cribbing under
outrigger floats.
ALTERNATE 2026 TEST BANK
REVIEW COMPLETE QUESTIONS
SOLUTIONS A+
◉ What keeps the book or outriggers from collapsing if a hydraulic
pressure hose is compromised.
Answer: One way check valve
◉ When is it permissible for a person to be unsafe tied in a personnel
basket.
Answer: Over water
◉ Upon arrival on a new job site with a crane, what is the primary major
concern.
Answer: Underground utilities
◉ What is the minimum distance allowed from rear counterweight
swing to a wall or earth.
Answer: 2 feet
◉ What is the minimum distance you may set up to an open excavation
on average soil.
Answer: At least 1 times the trench depth to the fulcrum point or tipping
axis
, ◉ What is a car body?.
Answer: The lower portion of a crane
◉ Which statement best describes the importance of OSHA 1926.1400
places on manufactures instructions, specifications, and limitations?.
Answer: They should be followed exactly as the law
◉ According to OSHA 1926.1422 where must hand signals be posted.
Answer: On the crane or near hoisting operations
◉ According to OSHA 1910.180 how accurate must the load weight be
when making picks in the structural portion of the load chart?.
Answer: plus or minus 10%
◉ According to OSHA 1910.180 are cranes allowed to be overloaded?.
Answer: Yes, but only during testing and not over 110% of capacity
◉ According to ASME B30.5 when setting outriggers the crane should
be raised to.
Answer: Get the tires free of crane weight
◉ What does ASME B30.5 say about the amount of cribbing under
outrigger floats.
