answers 2026
Arrangements-may-be-made-between-the-prime-contractor-and-any-______-to-handle-
obligations-which-might-be-more-appropriately-treated-on-a-jobsite-rather-than-individually;-
for-example,-agreements-as-to-who-supplies-first-aid-or-toilet-facilities.-a.-provider(s)-b.-
owner(s)-c.-subcontractor(s)-d.-any-of-these---correct-answers-c.-subcontractor(s)
According-to-OSHA,-occupants-must-keep-all-parts-of-the-body-inside-the-platform-during-
raising,-lowering,-and-positioning.-This-provision-does-not-apply-to-an-occupant-of-the-
platform-performing-the-duties-of-a-signal-person.-a.-True-b.-False---correct-answers-a.-True
Wire-rope-shall-not-be-used,-if-in-any-length-of-eight-diameters,-the-total-number-of-visible-
broken-wire-exceeds-_______-percent-of-the-total-number-of-wires,-or-if-the-rope-shows-
other-signs-of-excessive-wear,-corrosion,-or-defect.-a.-5-b.-10-c.-25-d.-50---correct-answers-b.-
10
On-a-caution-sign-what-are-the-colors?-a.-green-panel-white-lettering-b.-red-panel-with-black-
lettering-C.-black-panel-with-yellow-lettering-d.-none-of-these---correct-answers-C.-black-panel-
with-yellow-lettering
, Scaffolds-shall-be-capable-of-supporting-without-failure,-its-own-weight-at-least-_______-
times-the-maximum-load.-a.-2-b.-10-c.-4-d.-3---correct-answers-c.-4
According-to-OSHA,-as-of-1998-________will-not-be-approved-for-safety-equipment.-a.-work-
gloves-b.-body-belts-c.-goggles-d.-harnesses---correct-answers-b.-body-belts
What-is-the-angle-of-a-15-foot-deep-trench-in-type-"C"-soil?-a.-34-degrees-b.-45-degrees-c.-51-
degrees-d.-54-degrees---correct-answers-a.-34-degrees
Arrangement-made-by-the-prime-contractor-with-another-party-to-handle-obligations-that-are-
of-a-job-site-nature-relieves-the-prime-contractor-of-the-overall-responsibility-for-compliance-
with-regulations-pertaining-to-the-obligations-addressed-by-these-arrangements.-a.-True-b.-
False---correct-answers-b.-False
If-the-employees-of-an-electrical-contractor-used-scaffolding-put-up-by-the-general-contractor,-
and-the-scaffolding-was-not-safe-and-not-in-accordance-with-the-regulations,-the-electrical-
contractor-would-be-cited-for-a-violation,-and-be-subject-to-the-penalties-of-the-law.-a.-True-
b.-False---correct-answers-A.-True
The-responsibility-to-initiate-and-maintain-accident-prevention-programs-lies-with-the-
________.-a.-employee-b.-employer-c.-contractor-d.-subcontractor---correct-answers-b.-
employer
In-order-to-prevent-accidents-with-machinery,-tools,-materials,-or-equipment-that-is-not-in-
compliance-with-these-regulations,-these-items-shall-_________.-a.-be-identified-as-unsafe-by-
tagging-b.have-their-controls-locked-to-make-them-inoperable-c.-be-physically-removed-from-
its-place-of-operation-d.-any-of-these---correct-answers-d.-any-of-these
It-is-the-responsibility-of-the-employee-to-take-advantage-of-the-safety-and-health-training-
programs-provided-by-the-Secretary.-a.-True-b.-False---correct-answers-b.-False