Certified Asbestos Building Inspector
Exam Practice Test Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A Instant Download
Pdf
1. What is the primary health hazard associated with asbestos exposure?
A. Skin irritation
B. Respiratory diseases
C. Hearing loss
D. Eye strain
Correct Answer: B. Respiratory diseases
Rationale: Inhalation of asbestos fibers can cause lung diseases such as
asbestosis, lung cancer, and mesothelioma.
2. Which agency regulates asbestos in schools under AHERA?
A. OSHA
B. EPA
C. CDC
D. DOE
Correct Answer: B. EPA
Rationale: The Environmental Protection Agency enforces AHERA
regulations in schools.
,3. Friable asbestos means:
A. Asbestos that is wet
B. Asbestos easily crumbled by hand pressure
C. Asbestos mixed with paint
D. Asbestos sealed in plastic
Correct Answer: B. Asbestos easily crumbled by hand pressure
Rationale: Friable asbestos releases fibers easily when disturbed.
4. Which building material commonly contains asbestos?
A. Vinyl siding
B. Acoustic ceiling tiles
C. Glass windows
D. Aluminum framing
Correct Answer: B. Acoustic ceiling tiles
Rationale: Many older ceiling tiles were manufactured with asbestos for
fire resistance.
5. What is the most common route of asbestos exposure?
A. Ingestion
B. Dermal contact
C. Inhalation
D. Injection
Correct Answer: C. Inhalation
Rationale: Airborne fibers are the primary exposure pathway.
6. What does PCM stand for in asbestos analysis?
A. Particle Control Method
B. Phase Contrast Microscopy
C. Primary Chemical Measurement
D. Particle Counting Module
Correct Answer: B. Phase Contrast Microscopy
Rationale: PCM is used to count asbestos fibers in air samples.
7. Which PPE is essential during asbestos inspection?
A. Hard hat only
, B. Respirator
C. Gloves only
D. Safety glasses only
Correct Answer: B. Respirator
Rationale: Respirators protect against inhaling airborne asbestos fibers.
8. Asbestos is most hazardous when it is:
A. Painted
B. Sealed
C. Friable
D. Buried underground
Correct Answer: C. Friable
Rationale: Friable materials release fibers easily into the air.
9. What is the purpose of an asbestos inspection?
A. Remove all asbestos
B. Identify and assess asbestos-containing materials
C. Replace insulation
D. Paint contaminated areas
Correct Answer: B. Identify and assess asbestos-containing materials
Rationale: Inspectors locate and evaluate ACM, not remove it.
10.Which disease is uniquely linked to asbestos exposure?
A. Asthma
B. Mesothelioma
C. Tuberculosis
D. Pneumonia
Correct Answer: B. Mesothelioma
Rationale: Mesothelioma is strongly associated with asbestos exposure.
11.Which OSHA standard covers asbestos?
A. 29 CFR 1926.1101
B. 29 CFR 1910.120
C. 40 CFR 50
D. 49 CFR 172
Exam Practice Test Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A Instant Download
1. What is the primary health hazard associated with asbestos exposure?
A. Skin irritation
B. Respiratory diseases
C. Hearing loss
D. Eye strain
Correct Answer: B. Respiratory diseases
Rationale: Inhalation of asbestos fibers can cause lung diseases such as
asbestosis, lung cancer, and mesothelioma.
2. Which agency regulates asbestos in schools under AHERA?
A. OSHA
B. EPA
C. CDC
D. DOE
Correct Answer: B. EPA
Rationale: The Environmental Protection Agency enforces AHERA
regulations in schools.
,3. Friable asbestos means:
A. Asbestos that is wet
B. Asbestos easily crumbled by hand pressure
C. Asbestos mixed with paint
D. Asbestos sealed in plastic
Correct Answer: B. Asbestos easily crumbled by hand pressure
Rationale: Friable asbestos releases fibers easily when disturbed.
4. Which building material commonly contains asbestos?
A. Vinyl siding
B. Acoustic ceiling tiles
C. Glass windows
D. Aluminum framing
Correct Answer: B. Acoustic ceiling tiles
Rationale: Many older ceiling tiles were manufactured with asbestos for
fire resistance.
5. What is the most common route of asbestos exposure?
A. Ingestion
B. Dermal contact
C. Inhalation
D. Injection
Correct Answer: C. Inhalation
Rationale: Airborne fibers are the primary exposure pathway.
6. What does PCM stand for in asbestos analysis?
A. Particle Control Method
B. Phase Contrast Microscopy
C. Primary Chemical Measurement
D. Particle Counting Module
Correct Answer: B. Phase Contrast Microscopy
Rationale: PCM is used to count asbestos fibers in air samples.
7. Which PPE is essential during asbestos inspection?
A. Hard hat only
, B. Respirator
C. Gloves only
D. Safety glasses only
Correct Answer: B. Respirator
Rationale: Respirators protect against inhaling airborne asbestos fibers.
8. Asbestos is most hazardous when it is:
A. Painted
B. Sealed
C. Friable
D. Buried underground
Correct Answer: C. Friable
Rationale: Friable materials release fibers easily into the air.
9. What is the purpose of an asbestos inspection?
A. Remove all asbestos
B. Identify and assess asbestos-containing materials
C. Replace insulation
D. Paint contaminated areas
Correct Answer: B. Identify and assess asbestos-containing materials
Rationale: Inspectors locate and evaluate ACM, not remove it.
10.Which disease is uniquely linked to asbestos exposure?
A. Asthma
B. Mesothelioma
C. Tuberculosis
D. Pneumonia
Correct Answer: B. Mesothelioma
Rationale: Mesothelioma is strongly associated with asbestos exposure.
11.Which OSHA standard covers asbestos?
A. 29 CFR 1926.1101
B. 29 CFR 1910.120
C. 40 CFR 50
D. 49 CFR 172
