TEXAS STATE INSPECTOR SAFETY CERT. EXAM
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
1960
Choose an answer
1 One of the required procedures in the inspection of the steering is:
Electric turn signal lamps are required on all passenger cars beginning with the
2
model year:
A truck or trailer is required to have clearance lamps and side marker lamps if the
3
total width of the vehicle is:
When performing a road test on the service brakes, a truck weighing over 10,000 lbs
4 GVW (this would include larger trucks but not truck-trailer combinations) should be
, driven at a speed of 20 mph and should stop within:
Don't know?
Terms in this set (50)
One of the required procedures in Turning the steering wheel from full left to full
the inspection of the steering is: right
Conventional brakes or non-power 2 inch
brakes must have a minimum pedal
reserve of:
Any tire with wear bar indicators Tread wear indicators contact the road on any
would be rejected for the following two adjacent major grooves in the center of the
reason: middle of the tire
LED tail lamps may have no more 50%
than ______ of diodes malfunctioning
to pass inspection.
When performing a road test on the 40 feet
service brakes, a truck weighing
over 10,000 lbs GVW (this would
include larger trucks but not truck-
trailer combinations) should be
driven at a speed of 20 mph and
should stop within:
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
1960
Choose an answer
1 One of the required procedures in the inspection of the steering is:
Electric turn signal lamps are required on all passenger cars beginning with the
2
model year:
A truck or trailer is required to have clearance lamps and side marker lamps if the
3
total width of the vehicle is:
When performing a road test on the service brakes, a truck weighing over 10,000 lbs
4 GVW (this would include larger trucks but not truck-trailer combinations) should be
, driven at a speed of 20 mph and should stop within:
Don't know?
Terms in this set (50)
One of the required procedures in Turning the steering wheel from full left to full
the inspection of the steering is: right
Conventional brakes or non-power 2 inch
brakes must have a minimum pedal
reserve of:
Any tire with wear bar indicators Tread wear indicators contact the road on any
would be rejected for the following two adjacent major grooves in the center of the
reason: middle of the tire
LED tail lamps may have no more 50%
than ______ of diodes malfunctioning
to pass inspection.
When performing a road test on the 40 feet
service brakes, a truck weighing
over 10,000 lbs GVW (this would
include larger trucks but not truck-
trailer combinations) should be
driven at a speed of 20 mph and
should stop within:
