1
Support Operations PH II Pre Exam Study
Guide SPO Phase 1 Actual Exam 2026/2027 –
Complete Exam-Style Questions with Detailed
Rationales | Graded A+ Pass Guaranteed
Foundations of Support Operations
Q1: According to the 2026 SPO Phase 1 manual, which of the following best describes the
primary objective of the initial operational stage?
A. To establish full combat maneuver superiority
B. To ensure all life support systems are fully automated prior to deployment
C. To achieve a posture of readiness where critical resources are immediately available for
tasking
D. To complete all logistical paperwork before any personnel movement begins
Correct Answer: C
Rationale: The best answer is C because Phase 1 is all about setting the conditions for success by
getting critical resources to a state where they can be used instantly, rather than focusing on long-
term automation or just paperwork.
Q2: You are receiving a shift handoff. The outgoing NCO mentions a "minor" comms glitch that
occurs at 0200 hours but didn't affect the last mission. What is your first action according to
standard protocols?
A. Ignore it since it didn't affect the last mission
B. Log it in the shift journal and verify the workaround for the upcoming 0200 timeframe
C. Immediately call the maintenance officer to wake them up and report the fault
D. Rewrite the duty roster to ensure someone is awake specifically at 0200
Correct Answer: B
Rationale: This choice is correct because you must always document reported issues and verify if
the workaround still applies to your shift, ensuring continuity of care for the equipment.
,2
Q3: Which brevity code is standard across SPO Phase 1 operations to indicate that a unit has
reached its assigned location and is prepared for the next instruction?
A. OSCAR
B. LIMA
C. SIDEBAR
D. CHECKPOINT
Correct Answer: B
Rationale: This matches the principle that LIMA is the standard term for "in location and ready,"
which aligns with the current joint communication protocols we use in the field.
Q4: When operating under EMCON (Emission Control) conditions, which method of
communication is strictly prohibited unless explicitly authorized by the OIC?
A. Hand signals and messenger
B. Hardwired field phones
C. Unencrypted radio transmissions on non-secure nets
D. Infrared signaling devices
Correct Answer: C
Rationale: The best answer is C because sending unencrypted traffic is a major security violation
and defeats the purpose of EMCON, whereas the other options are low-signature or physical
methods.
Q5: Use the provided radio log excerpt to answer the question.
Radio Log, 14NOV 2026:
0815: NET CALL – ALL STATIONS CHECK COMMS
0820: STN 1 – READY
0822: STN 2 – READY, REQ QRF ON STANDBY
0825: STN 3 – READY
0830: STN 4 – NEG COMMS, OUTAGE REPORTED
, 3
Based on the log, which station requires immediate follow-up action from the support operations
center?
A. STN 1
B. STN 2
C. STN 3
D. STN 4
Correct Answer: D
Rationale: This choice is correct because STN 4 reported a negative communications status,
meaning they are cut off from the net and require immediate troubleshooting or alternative
coordination to restore the link.
Q6: A supply request form (DA Form 1234) is submitted with "URGENT" circled in red pen but
lacks the Commander’s signature. What is the correct procedural step?
A. Reject the form entirely and tell the requester to start over
B. Process the order immediately because "URGENT" implies prior verbal approval
C. Stall the order and verbally confirm with the Commander or their authorized rep while
logging the discrepancy
D. Sign it yourself as the NCO in charge to speed up the process
Correct Answer: C
Rationale: This aligns with the SPO Phase 1 manual section on supply integrity, which dictates
that urgent needs must still be validated, but the goal is to support the mission by confirming
approval rather than just stalling or bypassing protocol.
Q7: In the context of Support Operations, what does the acronym "RAVEN" typically signify
regarding personnel readiness?
A. Rest And Vacation Emergency Notice
B. Readiness, Availability, Visibility, Equipment, Negligence
C. Rapid Assessment of Vehicle Emergency Needs
D. Readiness And Verification of Essential Needs
Correct Answer: D
Support Operations PH II Pre Exam Study
Guide SPO Phase 1 Actual Exam 2026/2027 –
Complete Exam-Style Questions with Detailed
Rationales | Graded A+ Pass Guaranteed
Foundations of Support Operations
Q1: According to the 2026 SPO Phase 1 manual, which of the following best describes the
primary objective of the initial operational stage?
A. To establish full combat maneuver superiority
B. To ensure all life support systems are fully automated prior to deployment
C. To achieve a posture of readiness where critical resources are immediately available for
tasking
D. To complete all logistical paperwork before any personnel movement begins
Correct Answer: C
Rationale: The best answer is C because Phase 1 is all about setting the conditions for success by
getting critical resources to a state where they can be used instantly, rather than focusing on long-
term automation or just paperwork.
Q2: You are receiving a shift handoff. The outgoing NCO mentions a "minor" comms glitch that
occurs at 0200 hours but didn't affect the last mission. What is your first action according to
standard protocols?
A. Ignore it since it didn't affect the last mission
B. Log it in the shift journal and verify the workaround for the upcoming 0200 timeframe
C. Immediately call the maintenance officer to wake them up and report the fault
D. Rewrite the duty roster to ensure someone is awake specifically at 0200
Correct Answer: B
Rationale: This choice is correct because you must always document reported issues and verify if
the workaround still applies to your shift, ensuring continuity of care for the equipment.
,2
Q3: Which brevity code is standard across SPO Phase 1 operations to indicate that a unit has
reached its assigned location and is prepared for the next instruction?
A. OSCAR
B. LIMA
C. SIDEBAR
D. CHECKPOINT
Correct Answer: B
Rationale: This matches the principle that LIMA is the standard term for "in location and ready,"
which aligns with the current joint communication protocols we use in the field.
Q4: When operating under EMCON (Emission Control) conditions, which method of
communication is strictly prohibited unless explicitly authorized by the OIC?
A. Hand signals and messenger
B. Hardwired field phones
C. Unencrypted radio transmissions on non-secure nets
D. Infrared signaling devices
Correct Answer: C
Rationale: The best answer is C because sending unencrypted traffic is a major security violation
and defeats the purpose of EMCON, whereas the other options are low-signature or physical
methods.
Q5: Use the provided radio log excerpt to answer the question.
Radio Log, 14NOV 2026:
0815: NET CALL – ALL STATIONS CHECK COMMS
0820: STN 1 – READY
0822: STN 2 – READY, REQ QRF ON STANDBY
0825: STN 3 – READY
0830: STN 4 – NEG COMMS, OUTAGE REPORTED
, 3
Based on the log, which station requires immediate follow-up action from the support operations
center?
A. STN 1
B. STN 2
C. STN 3
D. STN 4
Correct Answer: D
Rationale: This choice is correct because STN 4 reported a negative communications status,
meaning they are cut off from the net and require immediate troubleshooting or alternative
coordination to restore the link.
Q6: A supply request form (DA Form 1234) is submitted with "URGENT" circled in red pen but
lacks the Commander’s signature. What is the correct procedural step?
A. Reject the form entirely and tell the requester to start over
B. Process the order immediately because "URGENT" implies prior verbal approval
C. Stall the order and verbally confirm with the Commander or their authorized rep while
logging the discrepancy
D. Sign it yourself as the NCO in charge to speed up the process
Correct Answer: C
Rationale: This aligns with the SPO Phase 1 manual section on supply integrity, which dictates
that urgent needs must still be validated, but the goal is to support the mission by confirming
approval rather than just stalling or bypassing protocol.
Q7: In the context of Support Operations, what does the acronym "RAVEN" typically signify
regarding personnel readiness?
A. Rest And Vacation Emergency Notice
B. Readiness, Availability, Visibility, Equipment, Negligence
C. Rapid Assessment of Vehicle Emergency Needs
D. Readiness And Verification of Essential Needs
Correct Answer: D
