Nicet level 1 Osha/First Aid Exam
Questions & Answers (Grade A+)
What are fires in cooking appliances that involve combustible
cooking media (vegetable or animal oils and fats). -
correct answer ✅Class K Fires
When should you inspect all of your PPE and safety equipment? -
correct answer ✅Before each use
Who's duty is it to ensure you are following all safety regulations
set by OSHA? -
correct answer ✅Employers
What type of fire extinguisher would you use for a fire where there
are combustible metals such as lithium or titanium? -
correct answer ✅Class D
The travel distance from any point of a protected area to the
nearest fire extinguisher shall not exceed how many feet? -
correct answer ✅100
What is the correct angle of a ladder from the base to the wall? -
correct answer ✅75 1/2
, Nicet level 1 Osha/First Aid Exam
Questions & Answers (Grade A+)
An extension ladder is being used. How far from the wall or support
should the base be? -
correct answer ✅1/4 of the ladders length
A ladder must be able to support ___ times the weight of the
anticipated load. -
correct answer ✅3.3
Personal safety is ___ Responsibility -
correct answer ✅yours
When using a ladder to access a roof, how far beyond the roof must
the ladder extend? -
correct answer ✅3 ft
Rails on a ladder must be non conductive when? -
correct answer ✅When the ladder is used for electrical work.
An electrician is going to replace a fire alarm control panel supplied
by a 120-volt AC source. What safety precaution should be taken
prior to replacement? -
correct answer ✅Lock out and tag out the power source
Questions & Answers (Grade A+)
What are fires in cooking appliances that involve combustible
cooking media (vegetable or animal oils and fats). -
correct answer ✅Class K Fires
When should you inspect all of your PPE and safety equipment? -
correct answer ✅Before each use
Who's duty is it to ensure you are following all safety regulations
set by OSHA? -
correct answer ✅Employers
What type of fire extinguisher would you use for a fire where there
are combustible metals such as lithium or titanium? -
correct answer ✅Class D
The travel distance from any point of a protected area to the
nearest fire extinguisher shall not exceed how many feet? -
correct answer ✅100
What is the correct angle of a ladder from the base to the wall? -
correct answer ✅75 1/2
, Nicet level 1 Osha/First Aid Exam
Questions & Answers (Grade A+)
An extension ladder is being used. How far from the wall or support
should the base be? -
correct answer ✅1/4 of the ladders length
A ladder must be able to support ___ times the weight of the
anticipated load. -
correct answer ✅3.3
Personal safety is ___ Responsibility -
correct answer ✅yours
When using a ladder to access a roof, how far beyond the roof must
the ladder extend? -
correct answer ✅3 ft
Rails on a ladder must be non conductive when? -
correct answer ✅When the ladder is used for electrical work.
An electrician is going to replace a fire alarm control panel supplied
by a 120-volt AC source. What safety precaution should be taken
prior to replacement? -
correct answer ✅Lock out and tag out the power source
