Maryland Occupational Safety Specialist
Exam With Actual Questions & Correct
Answers, Plus Rationales/Expert Verified
For Guaranteed Pass 2026/Latest
Update/Instant Download Pdf
1. What is the primary purpose of the Occupational Safety and
Health Act (OSHA)?
A. To increase company profits
B. To ensure safe and healthful working conditions
C. To regulate employee wages
D. To monitor employee attendance
Answer: B
Rationale: OSHA was established to ensure safe and healthful
working conditions by setting and enforcing standards.
2. Which OSHA standard covers general industry safety?
A. 29 CFR 1910
B. 29 CFR 1926
C. 29 CFR 1904
D. 29 CFR 1915
Answer: A
Rationale: 29 CFR 1910 applies to general industry, while 1926 is
for construction.
3. What is the first step in hazard control?
A. PPE
B. Engineering controls
C. Hazard identification
, D. Administrative controls
Answer: C
Rationale: Identifying hazards is the first step before applying
controls.
4. Which type of control eliminates the hazard entirely?
A. Administrative control
B. PPE
C. Engineering control
D. Elimination
Answer: D
Rationale: Elimination removes the hazard completely, making it
the most effective control.
5. What does PPE stand for?
A. Personal Protective Equipment
B. Primary Protection Equipment
C. Public Protection Equipment
D. Preventive Protection Equipment
Answer: A
Rationale: PPE refers to equipment worn to minimize exposure
to hazards.
6. Which agency enforces OSHA regulations?
A. EPA
B. OSHA
C. CDC
D. FEMA
Answer: B
Rationale: OSHA is responsible for enforcing workplace safety
standards.
, 7. What is the OSHA-required frequency for workplace inspections?
A. Monthly
B. Quarterly
C. Annually
D. No specific frequency mandated
Answer: D
Rationale: OSHA does not mandate a fixed frequency but
requires regular inspections based on risk.
8. What is a “near miss”?
A. An accident causing injury
B. An unreported incident
C. An incident that could have caused injury but did not
D. A minor violation
Answer: C
Rationale: Near misses are events that could have caused harm
but didn’t.
9. Which of the following is an example of an engineering control?
A. Safety training
B. Machine guarding
C. Work rotation
D. Safety signs
Answer: B
Rationale: Machine guards physically separate workers from
hazards.
10. What is the permissible exposure limit (PEL)?
A. Maximum legal exposure to a hazard
B. Minimum safe exposure
C. Suggested exposure level
D. Employee exposure preference
Exam With Actual Questions & Correct
Answers, Plus Rationales/Expert Verified
For Guaranteed Pass 2026/Latest
Update/Instant Download Pdf
1. What is the primary purpose of the Occupational Safety and
Health Act (OSHA)?
A. To increase company profits
B. To ensure safe and healthful working conditions
C. To regulate employee wages
D. To monitor employee attendance
Answer: B
Rationale: OSHA was established to ensure safe and healthful
working conditions by setting and enforcing standards.
2. Which OSHA standard covers general industry safety?
A. 29 CFR 1910
B. 29 CFR 1926
C. 29 CFR 1904
D. 29 CFR 1915
Answer: A
Rationale: 29 CFR 1910 applies to general industry, while 1926 is
for construction.
3. What is the first step in hazard control?
A. PPE
B. Engineering controls
C. Hazard identification
, D. Administrative controls
Answer: C
Rationale: Identifying hazards is the first step before applying
controls.
4. Which type of control eliminates the hazard entirely?
A. Administrative control
B. PPE
C. Engineering control
D. Elimination
Answer: D
Rationale: Elimination removes the hazard completely, making it
the most effective control.
5. What does PPE stand for?
A. Personal Protective Equipment
B. Primary Protection Equipment
C. Public Protection Equipment
D. Preventive Protection Equipment
Answer: A
Rationale: PPE refers to equipment worn to minimize exposure
to hazards.
6. Which agency enforces OSHA regulations?
A. EPA
B. OSHA
C. CDC
D. FEMA
Answer: B
Rationale: OSHA is responsible for enforcing workplace safety
standards.
, 7. What is the OSHA-required frequency for workplace inspections?
A. Monthly
B. Quarterly
C. Annually
D. No specific frequency mandated
Answer: D
Rationale: OSHA does not mandate a fixed frequency but
requires regular inspections based on risk.
8. What is a “near miss”?
A. An accident causing injury
B. An unreported incident
C. An incident that could have caused injury but did not
D. A minor violation
Answer: C
Rationale: Near misses are events that could have caused harm
but didn’t.
9. Which of the following is an example of an engineering control?
A. Safety training
B. Machine guarding
C. Work rotation
D. Safety signs
Answer: B
Rationale: Machine guards physically separate workers from
hazards.
10. What is the permissible exposure limit (PEL)?
A. Maximum legal exposure to a hazard
B. Minimum safe exposure
C. Suggested exposure level
D. Employee exposure preference
