Cleet Phase 4 Questions with Verified
Answers | Guaranteed Pass
A shooter's trigger finger is also known as the
Primary safety
Before a shooter fires a round, he or she must have
positive target identification
Before a shooter enters the firing range, four (4) basic premises must be met.
The shooter must (1) be in sound mental and physical condition; (2) have fresh
and safe ammunition; (3) have a holster that is in good condition and designed
specifically for the firearm; and (4) have
a firearm that is of sound design, and well maintained
The top priority of all participants in firearms training is
safety
All firearms should be treated as if
they are loaded
The proper method of unloading what type of firearm involves opening the
cylinder; ejecting cartridges into your hand; physically and visually checking the
, chambers to insure that each is empty ; and counting the rounds in your hand to
insure that they are all accounted for?
Revolver
You can presume a firearm is unloaded if
you check it and confirm it is unloaded
When will you load a firearm while on the range?
After you have taken position on the firing line and the command to load has been
given by the tower operator
Never place your finger on the trigger until
The muzzle has been cleared, is pointing down range, and the target has been
identified
Once in the ready gun position, the shooter's trigger finger should be located
Outside the trigger guard
In the event of a malfunction in a semi-automatic pistol, you should
perform the proper malfunction clearance procedure and continue firing
Never fire a succeeding round following a squib load until
the barrel has been checked for obstructions by a line officer
Answers | Guaranteed Pass
A shooter's trigger finger is also known as the
Primary safety
Before a shooter fires a round, he or she must have
positive target identification
Before a shooter enters the firing range, four (4) basic premises must be met.
The shooter must (1) be in sound mental and physical condition; (2) have fresh
and safe ammunition; (3) have a holster that is in good condition and designed
specifically for the firearm; and (4) have
a firearm that is of sound design, and well maintained
The top priority of all participants in firearms training is
safety
All firearms should be treated as if
they are loaded
The proper method of unloading what type of firearm involves opening the
cylinder; ejecting cartridges into your hand; physically and visually checking the
, chambers to insure that each is empty ; and counting the rounds in your hand to
insure that they are all accounted for?
Revolver
You can presume a firearm is unloaded if
you check it and confirm it is unloaded
When will you load a firearm while on the range?
After you have taken position on the firing line and the command to load has been
given by the tower operator
Never place your finger on the trigger until
The muzzle has been cleared, is pointing down range, and the target has been
identified
Once in the ready gun position, the shooter's trigger finger should be located
Outside the trigger guard
In the event of a malfunction in a semi-automatic pistol, you should
perform the proper malfunction clearance procedure and continue firing
Never fire a succeeding round following a squib load until
the barrel has been checked for obstructions by a line officer
