1|Page
IEC YEAR 3 FINAL EXAM LATEST 2026-2027 ACTUAL EXAM WITH
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (100%
VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
When light strings are utilized on a construction site, empty
sockets or sockets with shattered lamps should be replaced ___
after being reported.
Select one:
a. before the next work shift
b. immediately
c. within 72 hours
d. within 24 hours - ANSWER-immediately
The OSHA regulations set the minimum lighting level for different
areas on constructions sites. These levels are dependant upon
the task being performed in the area. For example, ___ foot
candles are required in an area used for offices than the number
that would be required for storage.
Select one:
,2|Page
a. more
b. less - ANSWER-more
Where construction work is in progress, OSHA requires areas,
aisles, stairs , ramps, runways, corridors, offices, shops, and
storage areas to be lighted.
Select one:
a. True
b. False - ANSWER-True
Free-standing temporary light stands ___ permitted to be used on
construction sites.
Select one:
a. are not
b. are - ANSWER-are
,3|Page
Temporary electric splices are to be insulted and inaccessible.
When these splices are more than ___ feet above the floor, they
are considered to be inaccessible.
Select one:
a. 16
b. 8
c. 12
d. 10
e. 6 1/2 - ANSWER-8
During the period of construction, ___ foot candles are required in
electrical equipment rooms.
Select one:
a. 3
b. 30
c. 5
d. 10
, 4|Page
e. 12 - ANSWER-10
To provide convenience receptacles and lighting for temporary
construction sites, a minimum of __ circuits are required.
Select one:
a. two
b. one
c. three
d. five - ANSWER-two
A dual-voltage motor could be a __ motor.
Select one:
a. 120- or 240-volt, 1Φ
b. 240- or 480-volt, 1Φ
c. 240- or 480-volt, 3Φ
d. any of these - ANSWER-any of these
IEC YEAR 3 FINAL EXAM LATEST 2026-2027 ACTUAL EXAM WITH
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (100%
VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
When light strings are utilized on a construction site, empty
sockets or sockets with shattered lamps should be replaced ___
after being reported.
Select one:
a. before the next work shift
b. immediately
c. within 72 hours
d. within 24 hours - ANSWER-immediately
The OSHA regulations set the minimum lighting level for different
areas on constructions sites. These levels are dependant upon
the task being performed in the area. For example, ___ foot
candles are required in an area used for offices than the number
that would be required for storage.
Select one:
,2|Page
a. more
b. less - ANSWER-more
Where construction work is in progress, OSHA requires areas,
aisles, stairs , ramps, runways, corridors, offices, shops, and
storage areas to be lighted.
Select one:
a. True
b. False - ANSWER-True
Free-standing temporary light stands ___ permitted to be used on
construction sites.
Select one:
a. are not
b. are - ANSWER-are
,3|Page
Temporary electric splices are to be insulted and inaccessible.
When these splices are more than ___ feet above the floor, they
are considered to be inaccessible.
Select one:
a. 16
b. 8
c. 12
d. 10
e. 6 1/2 - ANSWER-8
During the period of construction, ___ foot candles are required in
electrical equipment rooms.
Select one:
a. 3
b. 30
c. 5
d. 10
, 4|Page
e. 12 - ANSWER-10
To provide convenience receptacles and lighting for temporary
construction sites, a minimum of __ circuits are required.
Select one:
a. two
b. one
c. three
d. five - ANSWER-two
A dual-voltage motor could be a __ motor.
Select one:
a. 120- or 240-volt, 1Φ
b. 240- or 480-volt, 1Φ
c. 240- or 480-volt, 3Φ
d. any of these - ANSWER-any of these
