1|Page
Certified Playground Safety Inspector CPSI Sample
Exam ||Verified Exam!!!|| Most Recent Exam Actual
Complete Real Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ || Newest
Exam!!!
6. The majority of injuries associated with playground
equipment result from - Answer-falls to the surface on
which the equipment was located
7. An opening may present a common crush or shear
hazard only if it - Answer-grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes
meeting requirements of - Answer-ASTM F1292 and
F1487
9. Regarding playground safety signage, which of the
following is correct - Answer-Signage may not prevent
accidents but may reduce liability
,2|Page
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing -
Answer-Type of surfacing and amount of use
11. When planning a playground for public use, the play
equipment that is chosen must - Answer-be appropriate for
the age of intended users
12. A spring rocker with seat height of 26" is about to be
installed adjacent to the side of a fully enclosed bucket
swing set. The minimum distance required between the
swing set and the rocker is - Answer-108" or 9'
To be compliant with ASTM 1487, a designer or
manufacturer of playground equipment should - Answer-
provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether
or not a hazard exists on - Answer-a partially bounded
opening
3. Which of the following is correct regarding the impact-
attenuation of surfacing material - Answer-Critical height
must equal or exceed fall height
, 3|Page
4. When evaluating the structural integrity of a support
structure for a swing that appears to be failing, a CPSI
should - Answer-hire a licensed professional engineer to
certify the integrity of the equipment
13. The Site History File for a playground should contains -
Answer-a comprehensive inventory of all equipment, a
parts list, maintenance, and inspection recommendations
14. What is the minimum use zone between a stand-alone
climber and a standing-rocking/springing playground piece
- Answer-156" or 13'
15. The _____ of each play structure shall provide clear
and concise inspection instructions - Answer-Manufacturer
16. Heights of guardrails and protective barriers are
determined by which of the following characteristics of
children - Answer-Center of gravity
Certified Playground Safety Inspector CPSI Sample
Exam ||Verified Exam!!!|| Most Recent Exam Actual
Complete Real Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ || Newest
Exam!!!
6. The majority of injuries associated with playground
equipment result from - Answer-falls to the surface on
which the equipment was located
7. An opening may present a common crush or shear
hazard only if it - Answer-grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes
meeting requirements of - Answer-ASTM F1292 and
F1487
9. Regarding playground safety signage, which of the
following is correct - Answer-Signage may not prevent
accidents but may reduce liability
,2|Page
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing -
Answer-Type of surfacing and amount of use
11. When planning a playground for public use, the play
equipment that is chosen must - Answer-be appropriate for
the age of intended users
12. A spring rocker with seat height of 26" is about to be
installed adjacent to the side of a fully enclosed bucket
swing set. The minimum distance required between the
swing set and the rocker is - Answer-108" or 9'
To be compliant with ASTM 1487, a designer or
manufacturer of playground equipment should - Answer-
provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether
or not a hazard exists on - Answer-a partially bounded
opening
3. Which of the following is correct regarding the impact-
attenuation of surfacing material - Answer-Critical height
must equal or exceed fall height
, 3|Page
4. When evaluating the structural integrity of a support
structure for a swing that appears to be failing, a CPSI
should - Answer-hire a licensed professional engineer to
certify the integrity of the equipment
13. The Site History File for a playground should contains -
Answer-a comprehensive inventory of all equipment, a
parts list, maintenance, and inspection recommendations
14. What is the minimum use zone between a stand-alone
climber and a standing-rocking/springing playground piece
- Answer-156" or 13'
15. The _____ of each play structure shall provide clear
and concise inspection instructions - Answer-Manufacturer
16. Heights of guardrails and protective barriers are
determined by which of the following characteristics of
children - Answer-Center of gravity
