Mold Remediation Contractor Certification Exam Practice Test Questions and Answers 2026 | Instant Download PDF | Verified Rationales

Mold Remediation Contractor Certification
Exam Practice Test Questions And Correct
Answers (Verified Answers) Plus Rationales
2026 Q&A | Instant Download Pdf



1. What is the most common indoor mold found in water-damaged
buildings?
A. Cladosporium
B. Penicillium
C. Aspergillus
D. Stachybotrys
Rationale: Aspergillus is one of the most commonly found molds in
indoor environments, especially in dust and on damp surfaces.

2. Which humidity level generally supports mold growth indoors?
A. 30%
B. 40%
C. 60%

, D. 20%
Rationale: Mold thrives in environments where relative humidity
exceeds 55–60%.

3. Which of the following personal protective equipment (PPE) is
essential during mold remediation?
A. Gloves, respirator, goggles
B. Gloves, respirator, goggles, disposable coveralls
C. Gloves only
D. Respirator only
Rationale: Full PPE, including gloves, respirator, goggles, and
disposable coveralls, is required to prevent exposure to mold spores.

4. What is the first step in a mold remediation project?
A. Apply biocides
B. Identify and contain the mold-affected area
C. Remove all furnishings
D. Begin cleaning immediately
Rationale: Containment is critical to prevent the spread of mold
spores to unaffected areas.

5. Which type of respirator is recommended for most mold remediation
work?
A. Surgical mask
B. Half-mask with particulate filter P95
C. NIOSH-approved N95 or higher

, D. Dust mask
Rationale: N95 or higher respirators effectively filter airborne mold
spores.

6. What is the primary cause of mold growth indoors?
A. Poor ventilation
B. Moisture intrusion or water damage
C. Dust accumulation
D. High temperature
Rationale: Mold requires moisture to grow, so water intrusion is the
primary factor.

7. Which of the following materials cannot be effectively cleaned if mold
is present?
A. Metal
B. Porous materials like drywall or carpet
C. Glass
D. Plastic
Rationale: Porous materials absorb moisture and mold, making
complete remediation difficult.

8. What is the proper containment method for small mold remediation
jobs?
A. Entire building containment
B. Use of polyethylene sheeting and negative air pressure in the
affected area

, C. Closing doors only
D. Spraying disinfectant
Rationale: Localized containment with negative air pressure prevents
spores from spreading.

9. How long should HEPA vacuuming be performed on a mold-
ff ff ff ff ff ff ff ff ff




affected area? ff




A. 5 minutes
ff




B. Until visible mold is removed
ff ff ff ff




C. Until no dust or visible mold remains
ff ff ff ff ff ff




D. It is optional
ff ff




Rationale: HEPA vacuuming removes residual spores and dust to
ff ff ff ff ff ff ff ff




ff reduce contamination risk.
ff ff




10. What is the recommended method for cleaning non-
ff ff ff ff ff ff ff




porous surfaces contaminated with mold?
ff ff ff ff




A. Scrubbing with water only ff ff ff




B. Scrubbing with detergent and water, then drying ff ff ff ff ff ff




C. Applying bleach without scrubbing ff ff ff




D. Using an air blower ff ff ff




Rationale: Detergent and water remove mold from non-porous
ff ff ff ff ff ff ff




ff surfaces effectively, followed by proper drying.
ff ff ff ff ff




11. Which type of mold is often referred to as “black mold”?
ff ff ff ff ff ff ff ff ff ff




A. Aspergillus
B. Cladosporium