FTT 111-9352 MASTER STUDY SHEET 2026
VERIFIED QUESTIONS WITH ANSWERS
◉"short-stroking.". Answer: occurs with blowback actions when the
cartridge fails to produce enough energy to drive the action
completely through its stroke
◉Operator error. Answer: ----- can lead to failures to feed, ex- tract,
and eject.
◉limp wristing. Answer: The firearm is not secured enough while
being discharged.
◉Peening. Answer: is a process of working metal with the domed
end of a ball-peen ham- mer.
◉fixed and dynamic. Answer: Ejection malfunctions can vary with
bolt-action firearms because they employ two different ejector types
◉False. Answer: On a bolt action rifle, if the bolt face is damaged,
you will need to recut the chamber to SAAMI specs
,◉Ejection port. Answer: The internal box magazine is loaded
through the
◉Finish. Answer: Which type of chamber reamer is used to recut the
chamber of a shotgun?
◉top lever, cross bolt cutout. Answer: In most break-open action
shotguns, the locking lugs are secured either by the --- or the ---
◉Flex Hone Tool. Answer: If you do not have access to a lathe in
order to polish a shotgun chamber, use the ----- line of products to
accomplish this task
◉False. Answer: Fixed ejectors are spring-driven and live inside the
bolt head.
◉True. Answer: Hand reamers include an integral pilot used to keep
the reamer centered in the chamber.
◉Ogive. Answer: The ______________ of ball ammunition may create a
malfunction in chambering
, ◉Worn firing pin/striker spring. Answer: What is the most likely
cause of a failure to fire malfunction in a bolt action rifle?
◉disengage the safety. Answer: Failure to _________________ will lead to
a perceived failure to fire, and will feel like a "dead" movement.
◉Cocking cam and/or sear surface is damaged.. Answer: What are
two ways a cocking malfunction can occur in a bolt action rifle?
◉True. Answer: Fired cases provide insight on what happens inside
the chamber of a firearm
◉An extractor hook slides into the extractor groove in the controlled
feed design.. Answer: What is the main difference between a push
feed and a controlled feed bolt action rifle design?
◉Hardened. Answer: Military ammunition is unique because of the -
- primer cup
◉All the above. Answer: Feeding problems with break-open
shotguns are usually caused by:
◉Short stroke. Answer: "Limp wristing" a semi-automatic firearm
can cause a _________ malfunction
VERIFIED QUESTIONS WITH ANSWERS
◉"short-stroking.". Answer: occurs with blowback actions when the
cartridge fails to produce enough energy to drive the action
completely through its stroke
◉Operator error. Answer: ----- can lead to failures to feed, ex- tract,
and eject.
◉limp wristing. Answer: The firearm is not secured enough while
being discharged.
◉Peening. Answer: is a process of working metal with the domed
end of a ball-peen ham- mer.
◉fixed and dynamic. Answer: Ejection malfunctions can vary with
bolt-action firearms because they employ two different ejector types
◉False. Answer: On a bolt action rifle, if the bolt face is damaged,
you will need to recut the chamber to SAAMI specs
,◉Ejection port. Answer: The internal box magazine is loaded
through the
◉Finish. Answer: Which type of chamber reamer is used to recut the
chamber of a shotgun?
◉top lever, cross bolt cutout. Answer: In most break-open action
shotguns, the locking lugs are secured either by the --- or the ---
◉Flex Hone Tool. Answer: If you do not have access to a lathe in
order to polish a shotgun chamber, use the ----- line of products to
accomplish this task
◉False. Answer: Fixed ejectors are spring-driven and live inside the
bolt head.
◉True. Answer: Hand reamers include an integral pilot used to keep
the reamer centered in the chamber.
◉Ogive. Answer: The ______________ of ball ammunition may create a
malfunction in chambering
, ◉Worn firing pin/striker spring. Answer: What is the most likely
cause of a failure to fire malfunction in a bolt action rifle?
◉disengage the safety. Answer: Failure to _________________ will lead to
a perceived failure to fire, and will feel like a "dead" movement.
◉Cocking cam and/or sear surface is damaged.. Answer: What are
two ways a cocking malfunction can occur in a bolt action rifle?
◉True. Answer: Fired cases provide insight on what happens inside
the chamber of a firearm
◉An extractor hook slides into the extractor groove in the controlled
feed design.. Answer: What is the main difference between a push
feed and a controlled feed bolt action rifle design?
◉Hardened. Answer: Military ammunition is unique because of the -
- primer cup
◉All the above. Answer: Feeding problems with break-open
shotguns are usually caused by:
◉Short stroke. Answer: "Limp wristing" a semi-automatic firearm
can cause a _________ malfunction
