FTT 111-9352 ADVANCED PREP PACK 2026
FULL QUESTIONS AND CORRECT
ANSWERS
◉Pump- and lever-actions. Answer: Both designs typically utilize a
tubular magazine that is mounted under the barrel and feeds rounds
backward into the breech from the front of the receiver.
◉failures to feed. Answer: first type of malfunction(s) a lever-action
firearm can experience
◉operator error.. Answer: Typically, the most likely cause of failure
to feed malfunctions with lever-action firearm
◉light strike. Answer: *failure to fire* If the hammer/ mainspring is
damaged or worn*lever action*
◉Hammer, Mainspring, Sear, Strut. Answer: Failure to cock, lever
action parts *FCG*
◉Complex design. Answer: Troubleshooting lever action firearms
can sometimes be difficult because
, ◉Winchester 97. Answer: Which of the following types of shotguns
do not use a bolt carrier?
◉Broken sear. Answer: A ---- is the most likely cause of a pump-
action cocking malfunction.
◉True. Answer: In pump action firearms, operator error is the most
common reason why feeding issues occur.
◉Failure to feed & Extract. Answer: Based on the "Lever- and Pump-
Action Troubleshooting" Guide, a rough chamber may cause which
of the following malfunctions?
◉bolt channel; locking lug. Answer: The ______________ and the
_____________ are both parts that, if damaged, can cause firing pin
issues.
◉Hooks. Answer: On a pump action firearm, the sear ____________ are
trapped by the ledge on the trigger.
◉Timing. Answer: The lever action design relies upon the __________
of each assembly to ensure proper function.
FULL QUESTIONS AND CORRECT
ANSWERS
◉Pump- and lever-actions. Answer: Both designs typically utilize a
tubular magazine that is mounted under the barrel and feeds rounds
backward into the breech from the front of the receiver.
◉failures to feed. Answer: first type of malfunction(s) a lever-action
firearm can experience
◉operator error.. Answer: Typically, the most likely cause of failure
to feed malfunctions with lever-action firearm
◉light strike. Answer: *failure to fire* If the hammer/ mainspring is
damaged or worn*lever action*
◉Hammer, Mainspring, Sear, Strut. Answer: Failure to cock, lever
action parts *FCG*
◉Complex design. Answer: Troubleshooting lever action firearms
can sometimes be difficult because
, ◉Winchester 97. Answer: Which of the following types of shotguns
do not use a bolt carrier?
◉Broken sear. Answer: A ---- is the most likely cause of a pump-
action cocking malfunction.
◉True. Answer: In pump action firearms, operator error is the most
common reason why feeding issues occur.
◉Failure to feed & Extract. Answer: Based on the "Lever- and Pump-
Action Troubleshooting" Guide, a rough chamber may cause which
of the following malfunctions?
◉bolt channel; locking lug. Answer: The ______________ and the
_____________ are both parts that, if damaged, can cause firing pin
issues.
◉Hooks. Answer: On a pump action firearm, the sear ____________ are
trapped by the ledge on the trigger.
◉Timing. Answer: The lever action design relies upon the __________
of each assembly to ensure proper function.
