NFPA 70E Final Test Questions and
Answers (2026) | Question and
Answer Review | Graded A+
• On which three topics are unqualified workers required to receive
training under NFPA 70E? Answer: Any relevant electrical safety work
practices not covered by the NFPA 70E standard
Procedures for protecting them from relevant electrical hazards
Specific hazards associated with electrical energy
• NFPA 70E covers guidelines for preventing workplace injuries
resulting from electrical hazards.
Which three workplace accidents are examples of these hazards?
Answer: Electric current passes from ungrounded equipment and then
through a workers body, resulting in serious burns
Heat generated by an arc fault causes second-degree burns on a worker's
face and hands
An arc fault generates a pressure wave that ruptures a worker's eardrums
, • What are four examples of steps workers should take to verify an
electrically safe work condition? Answer: Three electrical power sources
are identified for a printing press
A worker places a lockout/tagout device on an electric motor's isolation
device
The power supply for a large pump is disconnected and the pump's
power circuit breaker is opened
A worker checks that a faulty air compressor's medium-voltage circuit
breaker has been completely withdrawn
• Which four responsibilities do employees have for ensuring electrical
safety? Answer: Care for, clean, and maintain PPE
Tell supervisors when PPE is worn or damaged
Wear PPE correctly
Attend training on the correct use and maintenance of PPE
• Identify three of the topics that qualified workers are required to cover
in training under NFPA 70E Answer: Proper use of insulated tools and
test equipment
Answers (2026) | Question and
Answer Review | Graded A+
• On which three topics are unqualified workers required to receive
training under NFPA 70E? Answer: Any relevant electrical safety work
practices not covered by the NFPA 70E standard
Procedures for protecting them from relevant electrical hazards
Specific hazards associated with electrical energy
• NFPA 70E covers guidelines for preventing workplace injuries
resulting from electrical hazards.
Which three workplace accidents are examples of these hazards?
Answer: Electric current passes from ungrounded equipment and then
through a workers body, resulting in serious burns
Heat generated by an arc fault causes second-degree burns on a worker's
face and hands
An arc fault generates a pressure wave that ruptures a worker's eardrums
, • What are four examples of steps workers should take to verify an
electrically safe work condition? Answer: Three electrical power sources
are identified for a printing press
A worker places a lockout/tagout device on an electric motor's isolation
device
The power supply for a large pump is disconnected and the pump's
power circuit breaker is opened
A worker checks that a faulty air compressor's medium-voltage circuit
breaker has been completely withdrawn
• Which four responsibilities do employees have for ensuring electrical
safety? Answer: Care for, clean, and maintain PPE
Tell supervisors when PPE is worn or damaged
Wear PPE correctly
Attend training on the correct use and maintenance of PPE
• Identify three of the topics that qualified workers are required to cover
in training under NFPA 70E Answer: Proper use of insulated tools and
test equipment
