Telecom Tower Technician 1 Exam Version 2
Preparation With Complete Questions And Correct
Detailed Answers| Brand New Version!
What is the maximum gross load that can be lifted if a synthetic rope
has a breaking strength of 6,600 pounds and a bowline knot is tied to
make a lifting eye? - CORRECT ANSWER-660 lbs.
Where should a coax ground be placed vertically in relation to the
hoisting grip? - CORRECT ANSWER-Above it
A hoist should be designed to withstand a minimum of __________,
which is the maximum intended line pull. - CORRECT ANSWER-2 times
What is the correct procedure for installing bolts in members and leg
splices? - CORRECT ANSWER-Up and out
The following is not a component of the gross load: - CORRECT
ANSWER-Tag person
1|Page
,The following should occur when you are in a high vehicle traffic area
and work is taking place: - CORRECT ANSWER-Use a designated signal
person wearing a high visibility vest to control traffic
An overhaul ball provides what function in operations? - CORRECT
ANSWER-Provides weight allowing the load line to return to the ground
What is the purpose of a turnbuckle when working with guy wires? -
CORRECT ANSWER-Tension
What is the result when a U-bolt is properly tightened? - CORRECT
ANSWER-Both sides are tightened evenly
T/F: According to the standards, a load chart must match the specific
pole which it was developed. - CORRECT ANSWER-True
What are some of the working parts make up a hoist? - CORRECT
ANSWER-Hydraulic motor, Hydraulic control levers, and Hydraulic pump
The best synthetic rope material to use for overhead lifting is
__________: - CORRECT ANSWER-Polyester
2|Page
, In rigging applications the term FS stands for __________: - CORRECT
ANSWER-Factor of safety
What should be worn when handling a sharp object or working around
sharp edges? - CORRECT ANSWER-Sturdy leather gloves
When a person has been overexposed to RF, one thing you should NOT
do is __________: - CORRECT ANSWER-Pour ice water over the persons
head or body
How often should fall protection equipment be inspected before using?
- CORRECT ANSWER-Daily
Which device is used to allow climbers to work hands free? - CORRECT
ANSWER-Positioning device
On fall protection components, the latch must be double locking and be
designed to withstand how many pounds of force? - CORRECT ANSWER-
3,600 lbs.
What is the factor of safety specified for blocks? - CORRECT ANSWER-4
to 1
3|Page
Preparation With Complete Questions And Correct
Detailed Answers| Brand New Version!
What is the maximum gross load that can be lifted if a synthetic rope
has a breaking strength of 6,600 pounds and a bowline knot is tied to
make a lifting eye? - CORRECT ANSWER-660 lbs.
Where should a coax ground be placed vertically in relation to the
hoisting grip? - CORRECT ANSWER-Above it
A hoist should be designed to withstand a minimum of __________,
which is the maximum intended line pull. - CORRECT ANSWER-2 times
What is the correct procedure for installing bolts in members and leg
splices? - CORRECT ANSWER-Up and out
The following is not a component of the gross load: - CORRECT
ANSWER-Tag person
1|Page
,The following should occur when you are in a high vehicle traffic area
and work is taking place: - CORRECT ANSWER-Use a designated signal
person wearing a high visibility vest to control traffic
An overhaul ball provides what function in operations? - CORRECT
ANSWER-Provides weight allowing the load line to return to the ground
What is the purpose of a turnbuckle when working with guy wires? -
CORRECT ANSWER-Tension
What is the result when a U-bolt is properly tightened? - CORRECT
ANSWER-Both sides are tightened evenly
T/F: According to the standards, a load chart must match the specific
pole which it was developed. - CORRECT ANSWER-True
What are some of the working parts make up a hoist? - CORRECT
ANSWER-Hydraulic motor, Hydraulic control levers, and Hydraulic pump
The best synthetic rope material to use for overhead lifting is
__________: - CORRECT ANSWER-Polyester
2|Page
, In rigging applications the term FS stands for __________: - CORRECT
ANSWER-Factor of safety
What should be worn when handling a sharp object or working around
sharp edges? - CORRECT ANSWER-Sturdy leather gloves
When a person has been overexposed to RF, one thing you should NOT
do is __________: - CORRECT ANSWER-Pour ice water over the persons
head or body
How often should fall protection equipment be inspected before using?
- CORRECT ANSWER-Daily
Which device is used to allow climbers to work hands free? - CORRECT
ANSWER-Positioning device
On fall protection components, the latch must be double locking and be
designed to withstand how many pounds of force? - CORRECT ANSWER-
3,600 lbs.
What is the factor of safety specified for blocks? - CORRECT ANSWER-4
to 1
3|Page
