1
NCCCO
NCCCO MOBILE CRANE EXAM QUESTIONS
WITH CORRECT VERIFIED SOLUTIONS 100%
GUARANTEED PASS (LATEST UPDATE)
1. Where must the operator's manual be kept during crane operations?
a. The operator's manual must be kept in a location that is readily available
b. The operator's manual must be kept in the cab at all times
c. The operator's manual must be kept in the dispatch office
d. The operator's manual must be kept in a secure place - ANS ✓b.
2. According to ASME B30.5, what are the minimal requirements to meet
crane operator
qualifications?
a. High School Diploma
b. CDL with on the job training
c. Physical, Written Test, Practical Test
d. CDL physical, employers written permission - ANS ✓c.
3. What hand signal must be obeyed at all times?
a. Swing
b. Clog-everything
c. Stop
d. Hoist Slow - ANS ✓c.
4. When removing pins or bolts from a boom assembly, workers shall
remain
a. clear of sledge hammers
b. out from under the boom
c. on top of boom holding pendants
d. in sight of the operator - ANS ✓b.
5. When may a crane be overloaded?
a. When the supervisor says it's OK
b. Never
c. When testing the crane
NCCCO MOBILE
, 2
NCCCO
d. When proof testing a man basket - ANS ✓c.
6. When can the operator leave the crane?
a. Break time
b. End of the shift
c. After securing the crane
d. When a storm is coming - ANS ✓b.
7. When can a crane be side loaded?
a. Dragging a load
b. With a freely suspended load
c. Never
d. Pile-driving - ANS ✓b.
8. The deflection of a boom will cause the load to?
a. side load the boom
b.decrfrease the radius
c. increase the radius
d. have no effect - ANS ✓c.
9. When should tag lines be used?
a. Always
b. Always, except when the use of the tagline become hazardous
c. Ehen the rotation of the load becomes hazardous
d. When the operator cant see the load - ANS ✓c.
10. What shall be in the operators cab during crane operations?
a. load charts
b. Inspection reports
c. Hand signal chart
d. The crane log - ANS ✓a.
11. Which of the following is considered duty cycle work?
a. Pile- driving
b. Setting trusses
c. Clam - Shell digging
d Unloading trucks - ANS ✓c.
12. When doing cycle work, the load chart must be reduced by how much?
a. 50%
b. 20%
NCCCO MOBILE
NCCCO
NCCCO MOBILE CRANE EXAM QUESTIONS
WITH CORRECT VERIFIED SOLUTIONS 100%
GUARANTEED PASS (LATEST UPDATE)
1. Where must the operator's manual be kept during crane operations?
a. The operator's manual must be kept in a location that is readily available
b. The operator's manual must be kept in the cab at all times
c. The operator's manual must be kept in the dispatch office
d. The operator's manual must be kept in a secure place - ANS ✓b.
2. According to ASME B30.5, what are the minimal requirements to meet
crane operator
qualifications?
a. High School Diploma
b. CDL with on the job training
c. Physical, Written Test, Practical Test
d. CDL physical, employers written permission - ANS ✓c.
3. What hand signal must be obeyed at all times?
a. Swing
b. Clog-everything
c. Stop
d. Hoist Slow - ANS ✓c.
4. When removing pins or bolts from a boom assembly, workers shall
remain
a. clear of sledge hammers
b. out from under the boom
c. on top of boom holding pendants
d. in sight of the operator - ANS ✓b.
5. When may a crane be overloaded?
a. When the supervisor says it's OK
b. Never
c. When testing the crane
NCCCO MOBILE
, 2
NCCCO
d. When proof testing a man basket - ANS ✓c.
6. When can the operator leave the crane?
a. Break time
b. End of the shift
c. After securing the crane
d. When a storm is coming - ANS ✓b.
7. When can a crane be side loaded?
a. Dragging a load
b. With a freely suspended load
c. Never
d. Pile-driving - ANS ✓b.
8. The deflection of a boom will cause the load to?
a. side load the boom
b.decrfrease the radius
c. increase the radius
d. have no effect - ANS ✓c.
9. When should tag lines be used?
a. Always
b. Always, except when the use of the tagline become hazardous
c. Ehen the rotation of the load becomes hazardous
d. When the operator cant see the load - ANS ✓c.
10. What shall be in the operators cab during crane operations?
a. load charts
b. Inspection reports
c. Hand signal chart
d. The crane log - ANS ✓a.
11. Which of the following is considered duty cycle work?
a. Pile- driving
b. Setting trusses
c. Clam - Shell digging
d Unloading trucks - ANS ✓c.
12. When doing cycle work, the load chart must be reduced by how much?
a. 50%
b. 20%
NCCCO MOBILE
