SFFMA FF1, FF2, and Hazmat Newest Exam
Preparation Newest 2026-2027 With Complete
Questions And Correct Detailed Answers| Brand
New Version
Damage when forcing a door can be justified by severity of emergency
and: - ANSWER-Speed needed for entry.
Most hinges on swinging doors are mounted on ____ that permits
swinging in one or both direction. - ANSWER-One side.
When forcing a inward swinging door, use another technique if the door
is: - ANSWER-Metal or metal-clad.
Where on a door should a firefighter strike to break a tempered plate
glass door? - ANSWER-Bottom corner.
Which of the following has one or two panels that slide into an adjacent
wall? - ANSWER-Interior pocket door.
1|Page
,Cutting padlocks is a proper was to force entry on: - ANSWER-Security
doors.
The type of forcible entry used on fire doors is similar to forcing: -
ANSWER-Overhead or sliding doors.
Forcing the wrong window in a structure can: - ANSWER-Draw fire into
uninvolved sections.
When performing forcible entry on casement windows, the first step is
to: - ANSWER-Break lowest pane of glass.
Which of the following types of windows has double-strength glass? -
ANSWER-Awning.
Which of the following should be used to force entry with a rotary saw
on a high-security window? - ANSWER-Carbide-tipped, medium-
toothed blade.
Which of the following is MOST accurate about using a rotary saw to
breach a metal wall? - ANSWER-Have charged hoseline available in case
of sparks.
2|Page
, A chain-link fence should be cut quickly with a: - ANSWER-Rotary saw.
What is one way that fire service ladders are different from ladders for
private industry or general use? - ANSWER-Fire service ladders provide
greater margin of safety.
Which of the following BEST describes the butt of the ladder? -
ANSWER-The bottom end of the ladder.
Which of the following BEST describes the halyard? - ANSWER-Rope or
cable used for hoisting and lowering fly sections.
What is the term for the cross members that extend from one beam to
the other and provide a foothold for climbing? - ANSWER-Rungs.
Whats the most common material used for fire service ladders? -
ANSWER-Aluminum.
Which of the following statements about heat sensor labels is MOST
accurate? - ANSWER-Heat sensors are preset to change color at 300 F
(149 C).
3|Page
Preparation Newest 2026-2027 With Complete
Questions And Correct Detailed Answers| Brand
New Version
Damage when forcing a door can be justified by severity of emergency
and: - ANSWER-Speed needed for entry.
Most hinges on swinging doors are mounted on ____ that permits
swinging in one or both direction. - ANSWER-One side.
When forcing a inward swinging door, use another technique if the door
is: - ANSWER-Metal or metal-clad.
Where on a door should a firefighter strike to break a tempered plate
glass door? - ANSWER-Bottom corner.
Which of the following has one or two panels that slide into an adjacent
wall? - ANSWER-Interior pocket door.
1|Page
,Cutting padlocks is a proper was to force entry on: - ANSWER-Security
doors.
The type of forcible entry used on fire doors is similar to forcing: -
ANSWER-Overhead or sliding doors.
Forcing the wrong window in a structure can: - ANSWER-Draw fire into
uninvolved sections.
When performing forcible entry on casement windows, the first step is
to: - ANSWER-Break lowest pane of glass.
Which of the following types of windows has double-strength glass? -
ANSWER-Awning.
Which of the following should be used to force entry with a rotary saw
on a high-security window? - ANSWER-Carbide-tipped, medium-
toothed blade.
Which of the following is MOST accurate about using a rotary saw to
breach a metal wall? - ANSWER-Have charged hoseline available in case
of sparks.
2|Page
, A chain-link fence should be cut quickly with a: - ANSWER-Rotary saw.
What is one way that fire service ladders are different from ladders for
private industry or general use? - ANSWER-Fire service ladders provide
greater margin of safety.
Which of the following BEST describes the butt of the ladder? -
ANSWER-The bottom end of the ladder.
Which of the following BEST describes the halyard? - ANSWER-Rope or
cable used for hoisting and lowering fly sections.
What is the term for the cross members that extend from one beam to
the other and provide a foothold for climbing? - ANSWER-Rungs.
Whats the most common material used for fire service ladders? -
ANSWER-Aluminum.
Which of the following statements about heat sensor labels is MOST
accurate? - ANSWER-Heat sensors are preset to change color at 300 F
(149 C).
3|Page
