AMT2 SWE EXAM STUDY GUIDE
2026/2027 COMPLETE QUESTIONS WITH
VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. Who shall be selected and designated in writing as QA inspectors? -
ANSWER ✔ Engineering Officer
2. Where is the Primary QA Inspector assigned? - ANSWER ✔ To the QA
section of the Engineering Department
3. Where is the Collateral Duty QA Inspector assigned? - ANSWER ✔ From a
maintenance shop
4. When can a Collateral QA sign off grounding discrepancies and flight
control work? - ANSWER ✔ When approved by a supervisor possessing
maintenance release authority.
5. What three general causes can most FOD be attributed to? - ANSWER ✔
Poor housekeeping, poor maintenance practices, and carelessness
6. Who shall promulgate local instructions to reduce FOD? - ANSWER ✔
Engineering Officer
,7. What does JOAP test for? - ANSWER ✔ Wear metal concentrations in the
lubricating fluid
8. What form do you fill out for an oil sample? - ANSWER ✔ DD Form 2026,
Oil Analysis Request
9. What is the Oil Analysis Request form? - ANSWER ✔ DD 2026
10.What is the Oil Analysis Record form? - ANSWER ✔ DD 2027
11.Who pays for JOAP testing? - ANSWER ✔ CG-41
12.How should a special JOAP sample be marked? - ANSWER ✔ Prominently
marked in red on the form and mailing container.
13.What is usually the decisive factor in the success of the oil analysis
program? - ANSWER ✔ The attitude of an operating activity toward the
program.
14.Who shall participate in the JOAP program? - ANSWER ✔ All USCG
aviation facilities
15.Who ensures maintenance personnel are trained in JOAP sample taking? -
ANSWER ✔ Engineering Officers
,16.What should SCHR entries for engines/components monitored by a JOAP
lab include? - ANSWER ✔ The location of the lab and inclusive dates of
monitoring.
17.What should components removed as a result of oil analysis include? -
ANSWER ✔ The reason for removal and contaminants in parts per million.
18.What is Reliability Centered Maintenance (RCM)? - ANSWER ✔ A
program of disciplined logic to realize the inherent reliability capabilities of
equipment.
19.How much fuel should be taken during sampling? - ANSWER ✔ One pint
20.How long should fuel samples be kept? - ANSWER ✔ For a period of 24
hours or until another sample is taken.
21.What should be done when free water or foreign matter is present in fuel? -
ANSWER ✔ The aircraft should be defueled and inspected for corrosion
and contamination.
22.When is conversation or activity that could distract flight crew prohibited? -
ANSWER ✔ During a critical phase of flight
23.What is the maximum duration for naps allowed for flight crew? -
ANSWER ✔ 40 minutes
, 24.Who must occupy a pilot's seat before an aircraft engine is started? -
ANSWER ✔ A pilot designated in type or a crew member certified by the
Commanding Officer
25.How many taxi crew are required when an aircraft is being taxied within 25
feet of obstructions? - ANSWER ✔ A minimum of two crew members
26.What are the three factors to evaluate for each mission over water? -
ANSWER ✔ Estimated time to loss of consciousness, probable survival
time, estimated recovery time
27.What manual contains the FM initial and RS minimums? - ANSWER ✔
3710.1G
28.How quickly can cold water lead to unconsciousness or death from
drowning? - ANSWER ✔ Often in the first 10 to 15 minutes
29.How much more often do fatal results from hypothermia occur in water than
on land? - ANSWER ✔ Over four times more often
30.How much can specialized insulated protective clothing increase survival
time? - ANSWER ✔ From 2 to 10 times or more
31.What should the maximum recovery time not exceed? - ANSWER ✔ The
estimated time to loss of consciousness
2026/2027 COMPLETE QUESTIONS WITH
VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. Who shall be selected and designated in writing as QA inspectors? -
ANSWER ✔ Engineering Officer
2. Where is the Primary QA Inspector assigned? - ANSWER ✔ To the QA
section of the Engineering Department
3. Where is the Collateral Duty QA Inspector assigned? - ANSWER ✔ From a
maintenance shop
4. When can a Collateral QA sign off grounding discrepancies and flight
control work? - ANSWER ✔ When approved by a supervisor possessing
maintenance release authority.
5. What three general causes can most FOD be attributed to? - ANSWER ✔
Poor housekeeping, poor maintenance practices, and carelessness
6. Who shall promulgate local instructions to reduce FOD? - ANSWER ✔
Engineering Officer
,7. What does JOAP test for? - ANSWER ✔ Wear metal concentrations in the
lubricating fluid
8. What form do you fill out for an oil sample? - ANSWER ✔ DD Form 2026,
Oil Analysis Request
9. What is the Oil Analysis Request form? - ANSWER ✔ DD 2026
10.What is the Oil Analysis Record form? - ANSWER ✔ DD 2027
11.Who pays for JOAP testing? - ANSWER ✔ CG-41
12.How should a special JOAP sample be marked? - ANSWER ✔ Prominently
marked in red on the form and mailing container.
13.What is usually the decisive factor in the success of the oil analysis
program? - ANSWER ✔ The attitude of an operating activity toward the
program.
14.Who shall participate in the JOAP program? - ANSWER ✔ All USCG
aviation facilities
15.Who ensures maintenance personnel are trained in JOAP sample taking? -
ANSWER ✔ Engineering Officers
,16.What should SCHR entries for engines/components monitored by a JOAP
lab include? - ANSWER ✔ The location of the lab and inclusive dates of
monitoring.
17.What should components removed as a result of oil analysis include? -
ANSWER ✔ The reason for removal and contaminants in parts per million.
18.What is Reliability Centered Maintenance (RCM)? - ANSWER ✔ A
program of disciplined logic to realize the inherent reliability capabilities of
equipment.
19.How much fuel should be taken during sampling? - ANSWER ✔ One pint
20.How long should fuel samples be kept? - ANSWER ✔ For a period of 24
hours or until another sample is taken.
21.What should be done when free water or foreign matter is present in fuel? -
ANSWER ✔ The aircraft should be defueled and inspected for corrosion
and contamination.
22.When is conversation or activity that could distract flight crew prohibited? -
ANSWER ✔ During a critical phase of flight
23.What is the maximum duration for naps allowed for flight crew? -
ANSWER ✔ 40 minutes
, 24.Who must occupy a pilot's seat before an aircraft engine is started? -
ANSWER ✔ A pilot designated in type or a crew member certified by the
Commanding Officer
25.How many taxi crew are required when an aircraft is being taxied within 25
feet of obstructions? - ANSWER ✔ A minimum of two crew members
26.What are the three factors to evaluate for each mission over water? -
ANSWER ✔ Estimated time to loss of consciousness, probable survival
time, estimated recovery time
27.What manual contains the FM initial and RS minimums? - ANSWER ✔
3710.1G
28.How quickly can cold water lead to unconsciousness or death from
drowning? - ANSWER ✔ Often in the first 10 to 15 minutes
29.How much more often do fatal results from hypothermia occur in water than
on land? - ANSWER ✔ Over four times more often
30.How much can specialized insulated protective clothing increase survival
time? - ANSWER ✔ From 2 to 10 times or more
31.What should the maximum recovery time not exceed? - ANSWER ✔ The
estimated time to loss of consciousness
