New York Site Safety Manager (SSM) Exam – 2026
Practice Test: 200 Questions with Correct
Answers & Rationales | PDF
1. What is the primary responsibility of a Site Safety Manager (SSM) on a
NYC construction site?
A) Supervising all trades on-site
B) Ensuring compliance with NYC DOB safety regulations
C) Performing all inspections personally
D) Managing the construction schedule
Rationale: 👀*** The SSM ensures that safety measures and DOB regulations
are followed, preventing accidents and violations.
2. Which of the following must be posted on a construction site as
required by NYC DOB?
A) Workers’ personal phone numbers
B) Site Safety Plan and SSM certification
C) Vendor advertisements
D) Building permit copies only
Rationale: 👀*** NYC DOB regulations require that the Site Safety Plan and
Site Safety Manager/Coordinator certifications be posted for compliance
verification.
3. Under NYC DOB regulations, which type of work requires a Site Safety
Manager on-site at all times?
A) Interior painting only
B) Roof work less than 6 feet
,C) High-rise construction (over 6 stories or 75 feet)
D) Landscaping
Rationale: 👀*** High-rise construction triggers SSM requirements for active
supervision of safety.
4. According to NYC regulations, how often must safety inspections be
conducted by the SSM?
A) Once a month
B) Once a week
C) Daily or as required to ensure safety compliance
D) Only after accidents
Rationale: 👀*** Daily inspections are required to ensure ongoing compliance
with safety standards and prevent incidents.
5. Which of the following is a key component of a Site Safety Plan (SSP)?
A) Contractor payroll records
B) Equipment maintenance logs only
C) Fall protection, hazard identification, and emergency procedures
D) Employee vacation schedules
Rationale: 👀*** The SSP must outline hazards, fall protection measures, and
emergency procedures per NYC DOB requirements.
6. What is the minimum fall protection requirement for workers at heights
over 6 feet in NYC construction?
A) Safety glasses only
B) Hard hats
,C) Guardrails, safety nets, or personal fall arrest systems
D) Reflective vests
Rationale: 👀*** NYC DOB requires proper fall protection systems for any work
above 6 feet to prevent serious injuries.
7. Which of the following defines a "competent person" under NYC
construction safety rules?
A) Any worker with experience
B) Any supervisor
C) Someone capable of identifying hazards and authorized to take
corrective measures
D) Site visitors
Rationale: 👀*** A competent person must recognize hazards and have
authority to correct them, as per OSHA and NYC DOB standards.
8. Which type of protection must be provided when workers are exposed
to falling objects?
A) Gloves only
B) Hard hats and barricades below the hazard
C) Safety glasses
D) Steel-toed boots only
Rationale: 👀*** Hard hats protect workers from head injuries, and barricades
prevent access to hazard zones.
9. When is a permit required for scaffolding on a NYC construction site?
A) Only for scaffolds over 10 feet
B) Any scaffold used for construction purposes
, C) Only for temporary scaffolds
D) Permits are never required
Rationale: 👀*** NYC DOB requires permits for all scaffolds used in
construction to ensure structural safety and proper setup.
10. What is the required ratio of guardrail height according to NYC DOB
regulations?
A) 30 inches
B) 32 inches
C) 42 inches ± 3 inches
D) 48 inches
Rationale: 👀*** NYC DOB mandates guardrails to be 42 inches above
walking/working surfaces to prevent falls.
11. Who is responsible for ensuring that all workers are trained in site
safety rules?
A) Only the general contractor
B) The Site Safety Manager or Site Safety Coordinator
C) OSHA inspectors
D) Individual workers
Rationale: 👀*** The SSM ensures proper training for all personnel in
accordance with the SSP.
12. What type of fall protection is required when performing demolition
work above 6 feet?
A) Gloves and goggles only
B) No protection required
Practice Test: 200 Questions with Correct
Answers & Rationales | PDF
1. What is the primary responsibility of a Site Safety Manager (SSM) on a
NYC construction site?
A) Supervising all trades on-site
B) Ensuring compliance with NYC DOB safety regulations
C) Performing all inspections personally
D) Managing the construction schedule
Rationale: 👀*** The SSM ensures that safety measures and DOB regulations
are followed, preventing accidents and violations.
2. Which of the following must be posted on a construction site as
required by NYC DOB?
A) Workers’ personal phone numbers
B) Site Safety Plan and SSM certification
C) Vendor advertisements
D) Building permit copies only
Rationale: 👀*** NYC DOB regulations require that the Site Safety Plan and
Site Safety Manager/Coordinator certifications be posted for compliance
verification.
3. Under NYC DOB regulations, which type of work requires a Site Safety
Manager on-site at all times?
A) Interior painting only
B) Roof work less than 6 feet
,C) High-rise construction (over 6 stories or 75 feet)
D) Landscaping
Rationale: 👀*** High-rise construction triggers SSM requirements for active
supervision of safety.
4. According to NYC regulations, how often must safety inspections be
conducted by the SSM?
A) Once a month
B) Once a week
C) Daily or as required to ensure safety compliance
D) Only after accidents
Rationale: 👀*** Daily inspections are required to ensure ongoing compliance
with safety standards and prevent incidents.
5. Which of the following is a key component of a Site Safety Plan (SSP)?
A) Contractor payroll records
B) Equipment maintenance logs only
C) Fall protection, hazard identification, and emergency procedures
D) Employee vacation schedules
Rationale: 👀*** The SSP must outline hazards, fall protection measures, and
emergency procedures per NYC DOB requirements.
6. What is the minimum fall protection requirement for workers at heights
over 6 feet in NYC construction?
A) Safety glasses only
B) Hard hats
,C) Guardrails, safety nets, or personal fall arrest systems
D) Reflective vests
Rationale: 👀*** NYC DOB requires proper fall protection systems for any work
above 6 feet to prevent serious injuries.
7. Which of the following defines a "competent person" under NYC
construction safety rules?
A) Any worker with experience
B) Any supervisor
C) Someone capable of identifying hazards and authorized to take
corrective measures
D) Site visitors
Rationale: 👀*** A competent person must recognize hazards and have
authority to correct them, as per OSHA and NYC DOB standards.
8. Which type of protection must be provided when workers are exposed
to falling objects?
A) Gloves only
B) Hard hats and barricades below the hazard
C) Safety glasses
D) Steel-toed boots only
Rationale: 👀*** Hard hats protect workers from head injuries, and barricades
prevent access to hazard zones.
9. When is a permit required for scaffolding on a NYC construction site?
A) Only for scaffolds over 10 feet
B) Any scaffold used for construction purposes
, C) Only for temporary scaffolds
D) Permits are never required
Rationale: 👀*** NYC DOB requires permits for all scaffolds used in
construction to ensure structural safety and proper setup.
10. What is the required ratio of guardrail height according to NYC DOB
regulations?
A) 30 inches
B) 32 inches
C) 42 inches ± 3 inches
D) 48 inches
Rationale: 👀*** NYC DOB mandates guardrails to be 42 inches above
walking/working surfaces to prevent falls.
11. Who is responsible for ensuring that all workers are trained in site
safety rules?
A) Only the general contractor
B) The Site Safety Manager or Site Safety Coordinator
C) OSHA inspectors
D) Individual workers
Rationale: 👀*** The SSM ensures proper training for all personnel in
accordance with the SSP.
12. What type of fall protection is required when performing demolition
work above 6 feet?
A) Gloves and goggles only
B) No protection required
