C of Q 310T Prep exam with correct
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
answers
1. What procedure should be followed before using a bench
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
grinder?
a) Dress stone and set rest with minimum clearance of 3 mm
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
(1/8").
b) Dress stone and set rest with maximum clearance of 1.6 mm
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
(1/16").
c) Set rest with minimum clearance of 3 mm (1/8") and dress
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
stone.
d) Set rest with maximum clearance of 1.6 mm (1/16") and
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
dress stone. - correct answers✔✔b) Dress stone and set rest
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
with maximum clearance of 1.6 mm (1/16").
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
2. What should be inspected on a chain sling before the
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
technician uses it? ||\\||\\ ||\\||\\
a) Length and size.
||\\||\\ ||\\||\\ ||\\||\\
b) Bends and color.
||\\||\\ ||\\||\\ ||\\||\\
c) Elongation and twist.
||\\||\\ ||\\||\\ ||\\||\\
,d) Date of manufacture and expiry date. - correct answers✔✔c)
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
Elongation and twist. ||\\||\\ ||\\||\\
3. Where would a technician obtain information on a recurring
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
problem?
a) Shop foreman.
||\\||\\ ||\\||\\
b) The service manual.
||\\||\\ ||\\||\\ ||\\||\\
c) The operators manual.
||\\||\\ ||\\||\\ ||\\||\\
d) Technical service bulletins. - correct answers✔✔d) Technical
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
service bulletins ||\\||\\
4. What is the proper procedure to clean up a coolant spill?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Cover with floor dry.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Wash into floor drain.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Contain with a floor dam.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Refer to MSDS information. - correct answers✔✔d) Refer to
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
MSDS information||\\||\\
5. Where is the data link located on a highway tractor?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Left side of glove box.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
,b) In the fuse panel.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Beside the Electronic Control Unit.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Left lower dash panel. - correct answers✔✔d) Left lower dash
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
panel.
||\\||\\
6. What steps should be followed when utilizing Torque-to-Yield
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
fasteners?
a) Lubricate threads and torque to specifications.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Rotate to specified degrees and torque to specifications.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Torque to specifications and rotate to specified degrees.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Tighten a specified number of degrees with an impact. -
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
correct answers✔✔c) Torque to specifications and rotate to
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
specified degrees ||\\||\\
7. What type of hose or tubing should be used on the
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
compressor air outlet? ||\\||\\ ||\\||\\
a) Nylon tubing.
||\\||\\ ||\\||\\
b) Stainless steel tubing.
||\\||\\ ||\\||\\ ||\\||\\
c) Reinforced rubber air brake hose.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Braided stainless steel with a Teflon inner lining. - correct
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
answers✔✔d) Braided stainless steel with a Teflon inner lining ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
, 8. What type of seal would be considered as a static seal?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Oil filter seal.
||\\||\\ ||\\||\\ ||\\||\\
b) Rear wheel seal.
||\\||\\ ||\\||\\ ||\\||\\
c) Rear crankshaft seal.
||\\||\\ ||\\||\\ ||\\||\\
d) Transmission output shaft seal. - correct answers✔✔a) Oil
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
filter seal. ||\\||\\
9. What would be indicated by engine oil contaminated with
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
coolant?
a) Cracked dry liner.
||\\||\\ ||\\||\\ ||\\||\\
b) Leaking liner O-rings.
||\\||\\ ||\\||\\ ||\\||\\
c) Leaking oil cooler core.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Cracked liner counter-bore. - correct answers✔✔b) Leaking
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
liner O-rings. ||\\||\\
10. What will cause excessive crankcase blow-by?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Worn oil control rings.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Excessive engine speed.
||\\||\\ ||\\||\\ ||\\||\\
c) Worn compression rings.
||\\||\\ ||\\||\\ ||\\||\\
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
answers
1. What procedure should be followed before using a bench
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
grinder?
a) Dress stone and set rest with minimum clearance of 3 mm
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
(1/8").
b) Dress stone and set rest with maximum clearance of 1.6 mm
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
(1/16").
c) Set rest with minimum clearance of 3 mm (1/8") and dress
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
stone.
d) Set rest with maximum clearance of 1.6 mm (1/16") and
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
dress stone. - correct answers✔✔b) Dress stone and set rest
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
with maximum clearance of 1.6 mm (1/16").
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
2. What should be inspected on a chain sling before the
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
technician uses it? ||\\||\\ ||\\||\\
a) Length and size.
||\\||\\ ||\\||\\ ||\\||\\
b) Bends and color.
||\\||\\ ||\\||\\ ||\\||\\
c) Elongation and twist.
||\\||\\ ||\\||\\ ||\\||\\
,d) Date of manufacture and expiry date. - correct answers✔✔c)
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
Elongation and twist. ||\\||\\ ||\\||\\
3. Where would a technician obtain information on a recurring
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
problem?
a) Shop foreman.
||\\||\\ ||\\||\\
b) The service manual.
||\\||\\ ||\\||\\ ||\\||\\
c) The operators manual.
||\\||\\ ||\\||\\ ||\\||\\
d) Technical service bulletins. - correct answers✔✔d) Technical
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
service bulletins ||\\||\\
4. What is the proper procedure to clean up a coolant spill?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Cover with floor dry.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Wash into floor drain.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Contain with a floor dam.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Refer to MSDS information. - correct answers✔✔d) Refer to
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
MSDS information||\\||\\
5. Where is the data link located on a highway tractor?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Left side of glove box.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
,b) In the fuse panel.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Beside the Electronic Control Unit.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Left lower dash panel. - correct answers✔✔d) Left lower dash
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
panel.
||\\||\\
6. What steps should be followed when utilizing Torque-to-Yield
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
fasteners?
a) Lubricate threads and torque to specifications.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Rotate to specified degrees and torque to specifications.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
c) Torque to specifications and rotate to specified degrees.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Tighten a specified number of degrees with an impact. -
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
correct answers✔✔c) Torque to specifications and rotate to
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
specified degrees ||\\||\\
7. What type of hose or tubing should be used on the
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
compressor air outlet? ||\\||\\ ||\\||\\
a) Nylon tubing.
||\\||\\ ||\\||\\
b) Stainless steel tubing.
||\\||\\ ||\\||\\ ||\\||\\
c) Reinforced rubber air brake hose.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Braided stainless steel with a Teflon inner lining. - correct
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
answers✔✔d) Braided stainless steel with a Teflon inner lining ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
, 8. What type of seal would be considered as a static seal?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Oil filter seal.
||\\||\\ ||\\||\\ ||\\||\\
b) Rear wheel seal.
||\\||\\ ||\\||\\ ||\\||\\
c) Rear crankshaft seal.
||\\||\\ ||\\||\\ ||\\||\\
d) Transmission output shaft seal. - correct answers✔✔a) Oil
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
filter seal. ||\\||\\
9. What would be indicated by engine oil contaminated with
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
coolant?
a) Cracked dry liner.
||\\||\\ ||\\||\\ ||\\||\\
b) Leaking liner O-rings.
||\\||\\ ||\\||\\ ||\\||\\
c) Leaking oil cooler core.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
d) Cracked liner counter-bore. - correct answers✔✔b) Leaking
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
liner O-rings. ||\\||\\
10. What will cause excessive crankcase blow-by?
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
a) Worn oil control rings.
||\\||\\ ||\\||\\ ||\\||\\ ||\\||\\
b) Excessive engine speed.
||\\||\\ ||\\||\\ ||\\||\\
c) Worn compression rings.
||\\||\\ ||\\||\\ ||\\||\\
