OSHA 10 ACTUAL FINAL EXAM | COMPLETE AND GRADED
QUESTIONS AND ANSWERS 2026 LATEST UPDATED | 100% GRADED
CORRECT | 100% GUARANTEED TO PASS | GET A+
What are two US government agencies that are good resources for safety and health information?
- (answer)OSHA and NIOSH
OSHA requires fall protection when working near the edge of a trench or excavation that is
_________ or more in depth. - (answer)6 feet
3. Every supported scaffold and its components must support, without failure, its own weight and
at least _______ the intended load. - (answer)4 times
4. During an OSHA inspection: - (answer)You have the right to talk to the inspector privately
5. The OSHA standards for Construction and General Industry are found in: - (answer)Parts 1926
and 1910
6. When the employer receives an OSHA citation, it must be: - (answer)Posted for 3 days or until
the violation is fixed
, 7. What does OSHA require employers to post for 3 days? - (answer)OSHA citations and
abatement verification notices
8. What section of the OSH Act does the Whistleblower Program reference? - (answer)Section
11(c)
9. OSHA requires fall protection at different heights for construction and general industry
however, regardless of the fall distance, which of the following is most - (answer)A. Fall
protection must be provided when working over dangerous equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - (answer)It is determined to have
strength and structural integrity to support intended loads
11. From your choices below, what would you consider to be a "major" fall hazard in
construction? - (answer)A. Roof edges and floor openings
B. Steel erection
C. Improper scaffold construction
QUESTIONS AND ANSWERS 2026 LATEST UPDATED | 100% GRADED
CORRECT | 100% GUARANTEED TO PASS | GET A+
What are two US government agencies that are good resources for safety and health information?
- (answer)OSHA and NIOSH
OSHA requires fall protection when working near the edge of a trench or excavation that is
_________ or more in depth. - (answer)6 feet
3. Every supported scaffold and its components must support, without failure, its own weight and
at least _______ the intended load. - (answer)4 times
4. During an OSHA inspection: - (answer)You have the right to talk to the inspector privately
5. The OSHA standards for Construction and General Industry are found in: - (answer)Parts 1926
and 1910
6. When the employer receives an OSHA citation, it must be: - (answer)Posted for 3 days or until
the violation is fixed
, 7. What does OSHA require employers to post for 3 days? - (answer)OSHA citations and
abatement verification notices
8. What section of the OSH Act does the Whistleblower Program reference? - (answer)Section
11(c)
9. OSHA requires fall protection at different heights for construction and general industry
however, regardless of the fall distance, which of the following is most - (answer)A. Fall
protection must be provided when working over dangerous equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - (answer)It is determined to have
strength and structural integrity to support intended loads
11. From your choices below, what would you consider to be a "major" fall hazard in
construction? - (answer)A. Roof edges and floor openings
B. Steel erection
C. Improper scaffold construction
