AMMO 49 COMPREHENSIVE EXAM UPDATED
QUESTIONS AND ANSWERS MARKED A+
✔✔To obtain an MHE Operator license, you must have completed the MHE Operator
Training Course and - ✔✔Be able to recognize inspection criterial located on the
applicable maintenance requirement card (MRC)
✔✔ALL drivers transporting A&E must have which qualification? - ✔✔1.) 12 hour driving
course
2.) Ammo-18
3.) Ammo-51MV
4.) Ammo-49DL
5.) AA&E 4 hour Driver Refresher
6.) Medical Exam Certificate
✔✔What is the correct action to take if you identify an AA&E shipment (either motor
vehicle or rail) that is in potentially hazardous condition? - ✔✔Request the ESO inspect
the load, but do not move it
✔✔What three items are security patrols required to check and log? - ✔✔1.) Doors
2.) Locks
3.) Windows
✔✔What is the guiding Navy publication used for physical security of conventional
AA&E? - ✔✔1.) SOP
2.) OPNAVISNT 5530.13
3.) OPNAVISNT 8023.24
✔✔Who is responsible for ordering inventory changes after receiving? (INCOMPLETE
QUESTION; ANSWER IS CORRECT) - ✔✔A
✔✔What is an inspection indicator? - ✔✔A rubber stamp or die issued to a specific
person
✔✔Who is responsible for using, verifying, or updating the Ordnance Information
System/Retail Ordnance Logistics Management System (OIS-R)? - ✔✔ESO (primarily),
IAO, Ammo Handler (last)
✔✔Which example of an accident, incident, or mishap do you report? - ✔✔All accidents,
incidents, and mishaps shall be reported
✔✔Based on this image, what is D? (02-01-05): D=KW^1/3 - ✔✔D is the separation
distance (in feet)
, ✔✔Qualification determines if an individual meet the requirements to do what three
actions? Select all that apply. - ✔✔1.) Perform a work task
2.) Handle specific equipment
3.) Handle specific A&E
✔✔An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives
Safety Management is - ✔✔Managing the station's Explosives Safety Program
✔✔When does an SOP expire? - ✔✔4 years from the approval date
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
QUESTIONS AND ANSWERS MARKED A+
✔✔To obtain an MHE Operator license, you must have completed the MHE Operator
Training Course and - ✔✔Be able to recognize inspection criterial located on the
applicable maintenance requirement card (MRC)
✔✔ALL drivers transporting A&E must have which qualification? - ✔✔1.) 12 hour driving
course
2.) Ammo-18
3.) Ammo-51MV
4.) Ammo-49DL
5.) AA&E 4 hour Driver Refresher
6.) Medical Exam Certificate
✔✔What is the correct action to take if you identify an AA&E shipment (either motor
vehicle or rail) that is in potentially hazardous condition? - ✔✔Request the ESO inspect
the load, but do not move it
✔✔What three items are security patrols required to check and log? - ✔✔1.) Doors
2.) Locks
3.) Windows
✔✔What is the guiding Navy publication used for physical security of conventional
AA&E? - ✔✔1.) SOP
2.) OPNAVISNT 5530.13
3.) OPNAVISNT 8023.24
✔✔Who is responsible for ordering inventory changes after receiving? (INCOMPLETE
QUESTION; ANSWER IS CORRECT) - ✔✔A
✔✔What is an inspection indicator? - ✔✔A rubber stamp or die issued to a specific
person
✔✔Who is responsible for using, verifying, or updating the Ordnance Information
System/Retail Ordnance Logistics Management System (OIS-R)? - ✔✔ESO (primarily),
IAO, Ammo Handler (last)
✔✔Which example of an accident, incident, or mishap do you report? - ✔✔All accidents,
incidents, and mishaps shall be reported
✔✔Based on this image, what is D? (02-01-05): D=KW^1/3 - ✔✔D is the separation
distance (in feet)
, ✔✔Qualification determines if an individual meet the requirements to do what three
actions? Select all that apply. - ✔✔1.) Perform a work task
2.) Handle specific equipment
3.) Handle specific A&E
✔✔An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives
Safety Management is - ✔✔Managing the station's Explosives Safety Program
✔✔When does an SOP expire? - ✔✔4 years from the approval date
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
