AMMO 49 LATEST 2026 STUDY GUIDE QUESTIONS AND
ANSWERS MARKED A+
✔✔What three items are security patrols required to check and log? - ✔✔1.) Doors
2.) Locks
3.) Windows
✔✔What is the guiding Navy publication used for physical security of conventional
AA&E? - ✔✔1.) SOP
2.) OPNAVISNT 5530.13
3.) OPNAVISNT 8023.24
✔✔Who is responsible for ordering inventory changes after receiving? (INCOMPLETE
QUESTION; ANSWER IS CORRECT) - ✔✔A
✔✔What is an inspection indicator? - ✔✔A rubber stamp or die issued to a specific
person
✔✔Who is responsible for using, verifying, or updating the Ordnance Information
System/Retail Ordnance Logistics Management System (OIS-R)? - ✔✔ESO (primarily),
IAO, Ammo Handler (last)
✔✔Which example of an accident, incident, or mishap do you report? - ✔✔All accidents,
incidents, and mishaps shall be reported
✔✔Based on this image, what is D? (02-01-05): D=KW^1/3 - ✔✔D is the separation
distance (in feet)
✔✔Qualification determines if an individual meet the requirements to do what three
actions? Select all that apply. - ✔✔1.) Perform a work task
2.) Handle specific equipment
3.) Handle specific A&E
✔✔An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives
Safety Management is - ✔✔Managing the station's Explosives Safety Program
✔✔When does an SOP expire? - ✔✔4 years from the approval date
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
, ✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
✔✔Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - ✔✔Revocation
✔✔Are site/building diagrams always required as part of an SOP? - ✔✔No. Site/building
diagrams are optional in SOPs if a diagram approved by the process supervisor is
posted at the facility.
✔✔What is the required minimum distance between practice bomb
assembly/disassembly and parked aircraft when the NEW does not exceed 50 pounds?
- ✔✔50 feet
✔✔When conducting LPS testing, which publications should you have on hand? Select
all that apply. - ✔✔1.) NAVSEA OP 5, Vol. I
ANSWERS MARKED A+
✔✔What three items are security patrols required to check and log? - ✔✔1.) Doors
2.) Locks
3.) Windows
✔✔What is the guiding Navy publication used for physical security of conventional
AA&E? - ✔✔1.) SOP
2.) OPNAVISNT 5530.13
3.) OPNAVISNT 8023.24
✔✔Who is responsible for ordering inventory changes after receiving? (INCOMPLETE
QUESTION; ANSWER IS CORRECT) - ✔✔A
✔✔What is an inspection indicator? - ✔✔A rubber stamp or die issued to a specific
person
✔✔Who is responsible for using, verifying, or updating the Ordnance Information
System/Retail Ordnance Logistics Management System (OIS-R)? - ✔✔ESO (primarily),
IAO, Ammo Handler (last)
✔✔Which example of an accident, incident, or mishap do you report? - ✔✔All accidents,
incidents, and mishaps shall be reported
✔✔Based on this image, what is D? (02-01-05): D=KW^1/3 - ✔✔D is the separation
distance (in feet)
✔✔Qualification determines if an individual meet the requirements to do what three
actions? Select all that apply. - ✔✔1.) Perform a work task
2.) Handle specific equipment
3.) Handle specific A&E
✔✔An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives
Safety Management is - ✔✔Managing the station's Explosives Safety Program
✔✔When does an SOP expire? - ✔✔4 years from the approval date
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
, ✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
✔✔Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - ✔✔Revocation
✔✔Are site/building diagrams always required as part of an SOP? - ✔✔No. Site/building
diagrams are optional in SOPs if a diagram approved by the process supervisor is
posted at the facility.
✔✔What is the required minimum distance between practice bomb
assembly/disassembly and parked aircraft when the NEW does not exceed 50 pounds?
- ✔✔50 feet
✔✔When conducting LPS testing, which publications should you have on hand? Select
all that apply. - ✔✔1.) NAVSEA OP 5, Vol. I
