AICM Certified Construction Safety Coordinator
CCSC Exam
**Question 1. Which OSHA standard specifically addresses fall protection in construction?**
A) 29 CFR 1910.1200
B) 29 CFR 1926.501
C) 29 CFR 1926.900
D) 29 CFR 1910.138
Answer: B
Explanation: 29 CFR 1926.501 is the OSHA regulation that mandates fall protection
requirements for construction sites.
**Question 2. Under ISO 45001, which clause requires an organization to establish a process for
hazard identification and risk assessment?**
A) Clause 4
B) Clause 6
C) Clause 8
D) Clause 10
Answer: B
Explanation: Clause 6 of ISO 45001 outlines the planning requirements, including hazard
identification and risk assessment.
**Question 3. An employer who fails to provide a written safety plan for a high‑risk excavation
may be held liable for which type of violation?**
A) Minor civil penalty only
B) Criminal negligence only
C) Both civil and criminal liability
D) No liability if an accident does not occur
Answer: C
,AICM Certified Construction Safety Coordinator
CCSC Exam
Explanation: OSHA can impose civil penalties, and in extreme cases of willful or reckless
conduct, criminal charges may be pursued.
**Question 4. Which document is required to be posted at the jobsite for any hot‑work
activities?**
A) OSHA 300 Log
B) Hot‑Work Permit
C) Safety Data Sheet (SDS)
D) Daily Work Report
Answer: B
Explanation: A Hot‑Work Permit must be obtained and posted before any welding, cutting, or
other fire‑generating work.
**Question 5. The OSHA 300 Log must be retained for how many years after the end of the
calendar year covered?**
A) 1 year
B) 3 years
C) 5 years
D) 7 years
Answer: C
Explanation: OSHA requires that the 300 Log be retained for five years following the end of the
calendar year it covers.
**Question 6. Which of the following is NOT a required element of a Site‑Specific Safety Plan
(SSSP)?**
A) Project schedule
B) Hazard analysis for site‑specific conditions
,AICM Certified Construction Safety Coordinator
CCSC Exam
C) Emergency response procedures
D) Personal protective equipment (PPE) requirements
Answer: A
Explanation: While a project schedule may be useful, it is not a mandatory element of an SSSP;
the other items directly address safety.
**Question 7. A “competent person” in trenching must be able to do which of the following?**
A) Inspect the trench for hazards and take corrective action
B) Operate a backhoe
C) Perform first‑aid on workers
D) Manage the project budget
Answer: A
Explanation: OSHA defines a competent person as one who can identify existing and predictable
hazards in the surroundings and has authority to correct them.
**Question 8. Which type of fall protection system uses a harness and a lifeline anchored to a
stable point?**
A) Guardrail system
B) Personal Fall Arrest System (PFAS)
C) Safety net
D) Fall‑resistant walkway
Answer: B
Explanation: PFAS consists of a full‑body harness, a connecting device, and an anchorage
capable of supporting the required load.
**Question 9. What is the minimum required height for a guardrail system on a construction
edge?**
, AICM Certified Construction Safety Coordinator
CCSC Exam
A) 30 inches
B) 36 inches
C) 42 inches
D) 48 inches
Answer: C
Explanation: OSHA requires guardrails to be 42 ± 3 inches high measured from the
walking/working surface.
**Question 10. When working near overhead power lines, the minimum safe approach distance
for a 50 kV line is:**
A) 5 ft
B) 10 ft
C) 15 ft
D) 20 ft
Answer: C
Explanation: OSHA’s minimum approach distance for a 50 kV line is 15 ft (3 ft per 10 kV).
**Question 11. Lockout/Tagout (LOTO) procedures are required under which OSHA standard?**
A) 29 CFR 1926.550
B) 29 CFR 1910.147
C) 29 CFR 1926.651
D) 29 CFR 1910.1200
Answer: B
Explanation: 29 CFR 1910.147 is the LOTO standard applicable to all industries, including
construction.
CCSC Exam
**Question 1. Which OSHA standard specifically addresses fall protection in construction?**
A) 29 CFR 1910.1200
B) 29 CFR 1926.501
C) 29 CFR 1926.900
D) 29 CFR 1910.138
Answer: B
Explanation: 29 CFR 1926.501 is the OSHA regulation that mandates fall protection
requirements for construction sites.
**Question 2. Under ISO 45001, which clause requires an organization to establish a process for
hazard identification and risk assessment?**
A) Clause 4
B) Clause 6
C) Clause 8
D) Clause 10
Answer: B
Explanation: Clause 6 of ISO 45001 outlines the planning requirements, including hazard
identification and risk assessment.
**Question 3. An employer who fails to provide a written safety plan for a high‑risk excavation
may be held liable for which type of violation?**
A) Minor civil penalty only
B) Criminal negligence only
C) Both civil and criminal liability
D) No liability if an accident does not occur
Answer: C
,AICM Certified Construction Safety Coordinator
CCSC Exam
Explanation: OSHA can impose civil penalties, and in extreme cases of willful or reckless
conduct, criminal charges may be pursued.
**Question 4. Which document is required to be posted at the jobsite for any hot‑work
activities?**
A) OSHA 300 Log
B) Hot‑Work Permit
C) Safety Data Sheet (SDS)
D) Daily Work Report
Answer: B
Explanation: A Hot‑Work Permit must be obtained and posted before any welding, cutting, or
other fire‑generating work.
**Question 5. The OSHA 300 Log must be retained for how many years after the end of the
calendar year covered?**
A) 1 year
B) 3 years
C) 5 years
D) 7 years
Answer: C
Explanation: OSHA requires that the 300 Log be retained for five years following the end of the
calendar year it covers.
**Question 6. Which of the following is NOT a required element of a Site‑Specific Safety Plan
(SSSP)?**
A) Project schedule
B) Hazard analysis for site‑specific conditions
,AICM Certified Construction Safety Coordinator
CCSC Exam
C) Emergency response procedures
D) Personal protective equipment (PPE) requirements
Answer: A
Explanation: While a project schedule may be useful, it is not a mandatory element of an SSSP;
the other items directly address safety.
**Question 7. A “competent person” in trenching must be able to do which of the following?**
A) Inspect the trench for hazards and take corrective action
B) Operate a backhoe
C) Perform first‑aid on workers
D) Manage the project budget
Answer: A
Explanation: OSHA defines a competent person as one who can identify existing and predictable
hazards in the surroundings and has authority to correct them.
**Question 8. Which type of fall protection system uses a harness and a lifeline anchored to a
stable point?**
A) Guardrail system
B) Personal Fall Arrest System (PFAS)
C) Safety net
D) Fall‑resistant walkway
Answer: B
Explanation: PFAS consists of a full‑body harness, a connecting device, and an anchorage
capable of supporting the required load.
**Question 9. What is the minimum required height for a guardrail system on a construction
edge?**
, AICM Certified Construction Safety Coordinator
CCSC Exam
A) 30 inches
B) 36 inches
C) 42 inches
D) 48 inches
Answer: C
Explanation: OSHA requires guardrails to be 42 ± 3 inches high measured from the
walking/working surface.
**Question 10. When working near overhead power lines, the minimum safe approach distance
for a 50 kV line is:**
A) 5 ft
B) 10 ft
C) 15 ft
D) 20 ft
Answer: C
Explanation: OSHA’s minimum approach distance for a 50 kV line is 15 ft (3 ft per 10 kV).
**Question 11. Lockout/Tagout (LOTO) procedures are required under which OSHA standard?**
A) 29 CFR 1926.550
B) 29 CFR 1910.147
C) 29 CFR 1926.651
D) 29 CFR 1910.1200
Answer: B
Explanation: 29 CFR 1910.147 is the LOTO standard applicable to all industries, including
construction.
