F 60 FIRE GUARD PRACTICE QUESTIONS WITH
DETAILED SOLUTIONS 2026
◉ usually it is not the flame that causes a fire. instead. Answer: it is
the thousands of sparks and pieces of hot
metal that are generated when using the torch. The sparks and
pieces of hot metal are all
possible sources of ignition.
◉ if u got hot work operation with citywide permit, the owner of the
premises(land,house) of the hot work operation areas must be
notified in writing (paper) by the citywide permit holder at least
____________________. Answer: 48 hours before the hot work is to be
started.
◉ The responsible person 's job are?. Answer: 1) ensure that the hot
work is performed in compliance with the terms and conditions of
the permit.
2) The person should inspect the hot work site prior to issuing the
hot work authorization, to ensure that it is a fire safe area.
3)He/she also need to periodically monitor the work ,to ensure
there are no fire safety hazards
, ◉ The pre-hot work check must be conducted by the ___________
before hot work is authorized and at least _____________.. Answer:
responsible person ,
once per day
◉ pre-hot work need a check report and must at the work site
during the work, made available for inspection by a representative
of the FDNY,
and maintained on the premises for a minimum of
_______________________. Answer: 48 hours after work is complete
◉ A pre-hot work check must be conducted at least ____________ and
must verify the
following:
1. The ______________ is in good working order.
2. The hot work area is clear of __________________.
(1) __________ rule for cutting or welding operation
(2) __________ rule for other hot work operation. Answer: once per
day,
hot work equipment ,
combustibles and flammable solids,
35 feet ,
25 feet
DETAILED SOLUTIONS 2026
◉ usually it is not the flame that causes a fire. instead. Answer: it is
the thousands of sparks and pieces of hot
metal that are generated when using the torch. The sparks and
pieces of hot metal are all
possible sources of ignition.
◉ if u got hot work operation with citywide permit, the owner of the
premises(land,house) of the hot work operation areas must be
notified in writing (paper) by the citywide permit holder at least
____________________. Answer: 48 hours before the hot work is to be
started.
◉ The responsible person 's job are?. Answer: 1) ensure that the hot
work is performed in compliance with the terms and conditions of
the permit.
2) The person should inspect the hot work site prior to issuing the
hot work authorization, to ensure that it is a fire safe area.
3)He/she also need to periodically monitor the work ,to ensure
there are no fire safety hazards
, ◉ The pre-hot work check must be conducted by the ___________
before hot work is authorized and at least _____________.. Answer:
responsible person ,
once per day
◉ pre-hot work need a check report and must at the work site
during the work, made available for inspection by a representative
of the FDNY,
and maintained on the premises for a minimum of
_______________________. Answer: 48 hours after work is complete
◉ A pre-hot work check must be conducted at least ____________ and
must verify the
following:
1. The ______________ is in good working order.
2. The hot work area is clear of __________________.
(1) __________ rule for cutting or welding operation
(2) __________ rule for other hot work operation. Answer: once per
day,
hot work equipment ,
combustibles and flammable solids,
35 feet ,
25 feet
