1|Page
ASNT Level III Basic Exam, Most Recent Exam 2026
Actual Complete Real Exam Questions And Correct
Answers||Verified Exam!!! (Verified Answers) | Already
Graded A+ | Guaranteed Success | Newest Exam!!!
Which of the following statements is true concerning the
usage of SNT-TC-1A? - Answers-SNT-TC-1A is not
intended to be used as a strict specification.
The SNT-TC-1A Interpretation panel will respond to
inquires about SNT-TC-1A. The inquiries must be: -
Answers-written and stated in general terms.
Which of the following statements is true? - Answers-SNT-
TC-1A was first published in the late 1960s.
With regards to the training of NDT personnel, the
employer: - Answers-may engage an outside service but
is, nevertheless, responsible for the certification of the
company's NDT personnel.
,2|Page
SNT-TC-1A is intended as a guideline for employers: -
Answers-to establish their own written practice for the
qualification and certification of their NDT personnel.
The following statement in the SNT-TC-1A: "It is
recognized that these guidelines may not be appropriate
for certain employers, circumstances, and/or applications."
What should be done if the guidelines are not appropriate?
- Answers-The employer should review the detailed
recommendations and modify them, as necessary, to meet
its particular needs with justification documented in an
annex to the written practice.
Which of the following statements is true? - Answers-
Certification is the written testimony of qualification.
Who should be responsible to asses whether or not an
individual should be qualified and certified who does not
perform DT, but monitors and evaluates NDT? - Answers-
The individual's employer.
In SNT-TC-1A(2020) holographic testing is a technique
under which of the following NDT methods? - Answers-
Laser testing.
,3|Page
ASNT intended that the recommendation of SNT-TC-1A be
applied: - Answers-with flexibility and reasoning.
Of the following, which is the most appropriate to
determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness
equipment? - Answers-The employer.
Certification is: - Answers-written testimony of
qualification.
Use of SNT-TC-1A is mandator when: - Answers-it has
been specified by the customer.
The basic levels of qualification recommended by SNT-
TC-1A are: - Answers-Level I, Level II, and Level III.
Should personnel who operate ultrasonic digital thickness
measurement equipment be qualified and certified? -
Answers-Whether any NDT personnel should be qualified
or certified depends solely upon the needs of the employer
, 4|Page
and the requirements of the employer's customer or
clientele.
According to the recommendation of SNT-TC-1A(2020),
which of the following is mandatory for certification of a
Level III? - Answers-Shall meet the requirements of the
employer's written practice.
According to the recommendations of SNT-TC-1A, which
of the following is true concerning a trainee's activities? -
Answers-The trainee may not conduct nondestructive
tests independently and may not report the results.
According to written instructions, an NDT Level I may: -
Answers-perform specific calibrations, specific
nondestructive tests, and specific evaluations.
May a Level I independently perform, evaluate, and sign
for results of nondestructive tests with supervision and
guidance from a Level II or Level III? - Answers-Yes, the
intent in SNT-TC-1A is that a level I may perform the
above functions provided that they are in accordance with
written instructions of a Level II or Level III.
ASNT Level III Basic Exam, Most Recent Exam 2026
Actual Complete Real Exam Questions And Correct
Answers||Verified Exam!!! (Verified Answers) | Already
Graded A+ | Guaranteed Success | Newest Exam!!!
Which of the following statements is true concerning the
usage of SNT-TC-1A? - Answers-SNT-TC-1A is not
intended to be used as a strict specification.
The SNT-TC-1A Interpretation panel will respond to
inquires about SNT-TC-1A. The inquiries must be: -
Answers-written and stated in general terms.
Which of the following statements is true? - Answers-SNT-
TC-1A was first published in the late 1960s.
With regards to the training of NDT personnel, the
employer: - Answers-may engage an outside service but
is, nevertheless, responsible for the certification of the
company's NDT personnel.
,2|Page
SNT-TC-1A is intended as a guideline for employers: -
Answers-to establish their own written practice for the
qualification and certification of their NDT personnel.
The following statement in the SNT-TC-1A: "It is
recognized that these guidelines may not be appropriate
for certain employers, circumstances, and/or applications."
What should be done if the guidelines are not appropriate?
- Answers-The employer should review the detailed
recommendations and modify them, as necessary, to meet
its particular needs with justification documented in an
annex to the written practice.
Which of the following statements is true? - Answers-
Certification is the written testimony of qualification.
Who should be responsible to asses whether or not an
individual should be qualified and certified who does not
perform DT, but monitors and evaluates NDT? - Answers-
The individual's employer.
In SNT-TC-1A(2020) holographic testing is a technique
under which of the following NDT methods? - Answers-
Laser testing.
,3|Page
ASNT intended that the recommendation of SNT-TC-1A be
applied: - Answers-with flexibility and reasoning.
Of the following, which is the most appropriate to
determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness
equipment? - Answers-The employer.
Certification is: - Answers-written testimony of
qualification.
Use of SNT-TC-1A is mandator when: - Answers-it has
been specified by the customer.
The basic levels of qualification recommended by SNT-
TC-1A are: - Answers-Level I, Level II, and Level III.
Should personnel who operate ultrasonic digital thickness
measurement equipment be qualified and certified? -
Answers-Whether any NDT personnel should be qualified
or certified depends solely upon the needs of the employer
, 4|Page
and the requirements of the employer's customer or
clientele.
According to the recommendation of SNT-TC-1A(2020),
which of the following is mandatory for certification of a
Level III? - Answers-Shall meet the requirements of the
employer's written practice.
According to the recommendations of SNT-TC-1A, which
of the following is true concerning a trainee's activities? -
Answers-The trainee may not conduct nondestructive
tests independently and may not report the results.
According to written instructions, an NDT Level I may: -
Answers-perform specific calibrations, specific
nondestructive tests, and specific evaluations.
May a Level I independently perform, evaluate, and sign
for results of nondestructive tests with supervision and
guidance from a Level II or Level III? - Answers-Yes, the
intent in SNT-TC-1A is that a level I may perform the
above functions provided that they are in accordance with
written instructions of a Level II or Level III.
