Bicsi Installer 1 EXAM ACTUAL
QUESTIONS AND CORRECT ANSWERS
AHJ - CORRECT ANSWERS Authority Having Jurisdiction. This is any
state or government department which enforces code compliance on a given
project. The building official, electrical inspector, fire martial, or other
individual/entities responsible for interpretation of enforcement. (ITSIMM,
Page A-1 and A-2)
A Drawings (Architectural) - CORRECT ANSWERS Drawings that
show a plan (top) view of each floor in a building. They include all aspects of
the physical construction of the building (ITSIMM, Page 10-5)
Code - CORRECT ANSWERS an organized list of laws and rules
intended to ensure safety during an instillation (ITSIMM, Page 3-52)
E Drawings (Electrical) - CORRECT ANSWERS Drawings that indicate
where electrical services are installed in a building. Includes drawings of
grounding systems and locations of outlets. (ITSIMM, Page 10-5)
FP Drawings (Fire Protection) - CORRECT ANSWERS Drawings that
show the size and route of fire suppression agent heads and nozzles within a
structure. (ITSIMM, Page 10-5)
ICT - CORRECT ANSWERS Information and Communication
Technology (ITSIMM, Page A-1)
P Drawings (Plumbing) - CORRECT ANSWERS Drawings that show
the routes and sizes of potable water, specialized water, sanitary sewer, and
rainwater roof drain piping within a building. (ITSIMM, page 10-5)
,M Drawing (Mechanical) - CORRECT ANSWERS Drawings that show
the placement and size of HVAC system ducts, air handler units, chilled water
piping, and refrigeration piping in a building. (ITSIMM, Page 10-5)
Regulation - CORRECT ANSWERS A rule or directive made and
maintained by an authority that leads to uniformity. (ITSIMM, page A-2)
Standards - CORRECT ANSWERS Agreed-upon norms about properties
of systems, components, and best practices accepted to ensure a minimum
degree of performance. Decided by popular vote by accredited organizations or
by the business developing the systems and components. (ITSIMM, page 3-54)
T Drawings (Telecommunication) - CORRECT ANSWERS Drawings
that show the pathways of wires, work area outlet locations, distribution rooms,
TR layouts, and additional media required for the project for the network and
telecommunications spaces. (ITSIMM, page 10-5)
S Drawings (Structural) - CORRECT ANSWERS Drawings that show
the location of the building skeletal system. Including: steel beams, floor
construction material, exterior walls, and the components that make up the
building's construction. Usually give with a top view and side view of the
building. (ITSIMM, page 10-5)
Analog Signal - CORRECT ANSWERS A type of signal where the data
is represented by continuous waves of a physical medium. Expressed as voltage,
amplitude, and frequency. (ITSIMM, page 1-6)
Bandwidth - CORRECT ANSWERS The amount of data that can be
transmitted over a system in a given amount of time. Typically expressed in the
range of analog frequencies (e.g., 0 Hz to 1 MHz). (ITSIMM, page 1-9)
, Codec - CORRECT ANSWERS Converts analog data to digital formats
for transmission over digital media. (ITSIMM, page 1-8)
Current (I) - CORRECT ANSWERS Flow of electrons (Measured in
Amps) (ITSIMM, GL-12)
Decibel (dB) - CORRECT ANSWERS Ratio of two signals that may be
used for comparing power, current, or voltage. Logarithmic function. (ITSIMM,
page 1-9)
Digital Signal - CORRECT ANSWERS A signal that encodes
information as a string of 1's and 0's. Used by digital devices. (ITSIMM, page 1-
6)
EMI - CORRECT ANSWERS Electromagnetic interference. Interference
caused by motors, power lines, and fluorescent lights. Cables can be shielded to
protect signals from EMI. EMI is the unwanted energy that is coupled into a
conductor or circuit that causes effects of electronics and signal transmission.
(ITSIMM, page 1-3)
Frequency - CORRECT ANSWERS The number of cycles that pass a
point in a given time. Frequency is represented by Hz. (ITSIMM, page 1-4)
If a unit of time is equal to 1 second, what is the frequency of a 1 second
wavelength measured as? - CORRECT ANSWERS 1 Hz (ITSIMM, page
1-4)
Modem - CORRECT ANSWERS Communications hardware device that
facilitates the transmission of data. This device converts digital signal into two
distinct analog frequencies (ITSIMM, page 1-7)
QUESTIONS AND CORRECT ANSWERS
AHJ - CORRECT ANSWERS Authority Having Jurisdiction. This is any
state or government department which enforces code compliance on a given
project. The building official, electrical inspector, fire martial, or other
individual/entities responsible for interpretation of enforcement. (ITSIMM,
Page A-1 and A-2)
A Drawings (Architectural) - CORRECT ANSWERS Drawings that
show a plan (top) view of each floor in a building. They include all aspects of
the physical construction of the building (ITSIMM, Page 10-5)
Code - CORRECT ANSWERS an organized list of laws and rules
intended to ensure safety during an instillation (ITSIMM, Page 3-52)
E Drawings (Electrical) - CORRECT ANSWERS Drawings that indicate
where electrical services are installed in a building. Includes drawings of
grounding systems and locations of outlets. (ITSIMM, Page 10-5)
FP Drawings (Fire Protection) - CORRECT ANSWERS Drawings that
show the size and route of fire suppression agent heads and nozzles within a
structure. (ITSIMM, Page 10-5)
ICT - CORRECT ANSWERS Information and Communication
Technology (ITSIMM, Page A-1)
P Drawings (Plumbing) - CORRECT ANSWERS Drawings that show
the routes and sizes of potable water, specialized water, sanitary sewer, and
rainwater roof drain piping within a building. (ITSIMM, page 10-5)
,M Drawing (Mechanical) - CORRECT ANSWERS Drawings that show
the placement and size of HVAC system ducts, air handler units, chilled water
piping, and refrigeration piping in a building. (ITSIMM, Page 10-5)
Regulation - CORRECT ANSWERS A rule or directive made and
maintained by an authority that leads to uniformity. (ITSIMM, page A-2)
Standards - CORRECT ANSWERS Agreed-upon norms about properties
of systems, components, and best practices accepted to ensure a minimum
degree of performance. Decided by popular vote by accredited organizations or
by the business developing the systems and components. (ITSIMM, page 3-54)
T Drawings (Telecommunication) - CORRECT ANSWERS Drawings
that show the pathways of wires, work area outlet locations, distribution rooms,
TR layouts, and additional media required for the project for the network and
telecommunications spaces. (ITSIMM, page 10-5)
S Drawings (Structural) - CORRECT ANSWERS Drawings that show
the location of the building skeletal system. Including: steel beams, floor
construction material, exterior walls, and the components that make up the
building's construction. Usually give with a top view and side view of the
building. (ITSIMM, page 10-5)
Analog Signal - CORRECT ANSWERS A type of signal where the data
is represented by continuous waves of a physical medium. Expressed as voltage,
amplitude, and frequency. (ITSIMM, page 1-6)
Bandwidth - CORRECT ANSWERS The amount of data that can be
transmitted over a system in a given amount of time. Typically expressed in the
range of analog frequencies (e.g., 0 Hz to 1 MHz). (ITSIMM, page 1-9)
, Codec - CORRECT ANSWERS Converts analog data to digital formats
for transmission over digital media. (ITSIMM, page 1-8)
Current (I) - CORRECT ANSWERS Flow of electrons (Measured in
Amps) (ITSIMM, GL-12)
Decibel (dB) - CORRECT ANSWERS Ratio of two signals that may be
used for comparing power, current, or voltage. Logarithmic function. (ITSIMM,
page 1-9)
Digital Signal - CORRECT ANSWERS A signal that encodes
information as a string of 1's and 0's. Used by digital devices. (ITSIMM, page 1-
6)
EMI - CORRECT ANSWERS Electromagnetic interference. Interference
caused by motors, power lines, and fluorescent lights. Cables can be shielded to
protect signals from EMI. EMI is the unwanted energy that is coupled into a
conductor or circuit that causes effects of electronics and signal transmission.
(ITSIMM, page 1-3)
Frequency - CORRECT ANSWERS The number of cycles that pass a
point in a given time. Frequency is represented by Hz. (ITSIMM, page 1-4)
If a unit of time is equal to 1 second, what is the frequency of a 1 second
wavelength measured as? - CORRECT ANSWERS 1 Hz (ITSIMM, page
1-4)
Modem - CORRECT ANSWERS Communications hardware device that
facilitates the transmission of data. This device converts digital signal into two
distinct analog frequencies (ITSIMM, page 1-7)
