CERTIFIED HEALTHCARE CONSTRUCTOR
CHC COMPLETE COMPILATION BUNDLE
EXAMINATION TEST 2026 QUESTIONS
WITH SOLUTIONS GRADED A+
⩥ When should medical equipment modality selections ideally be made
during the planning, design, and construction process? Answer: Before
the end of SDs
⩥ When should medical equipment manufacturer selections ideally be
made for each modality during the planning, design, and construction
process? Answer: Before the end of DDs
⩥ What is a medical equipment modality? Answer: Refers to different
types of imaging equipment
⩥ What are some examples of medical imaging modalities? Answer:
Conventional radiography
Fluoroscopy
Angiography
Mammography
Computed Tomography
Ultrasound and Ultrasound/Doppler
,Magnetic resonance Imaging
Nuclear Medicine
⩥ NFPA 101-2000 details that "primary level of exit discharge of a
building shall be the lowest story whose floor is level with or above
finished grade on the exterior wall line for XX% or more of its
perimeter." Answer: 50%
⩥ Does an MRI machine use radiation to produce its images? Answer:
No, it uses magnetic and radio frequencies
⩥ Does an ultrasound use radiation to produce its images? Answer: No,
it uses sound waves
⩥ What does a CT scan machine use to produce its images? Answer:
Ionizing radiation
⩥ When should ICRA planning be complete when a new construction
project is being built next to an existing building if the two will
eventually connect? Answer: Before construction starts
⩥ Before an employee enters a permit-required confined space, the
internal atmosphere shall be tested with a calibrated direct-reading
instrument for oxygen content and which of the following? Answer:
potential toxic air contaminants, and flammable gases and vapors
, ⩥ What are the 3 main components of the exterior wall system that
keeps moisture out of the building? Answer: weather barrier, air gap,
exterior finish
⩥ What is the best contract type for an owner if a project is only 50%
designed? Answer: cost plus GMP
⩥ Is a facility in bad shape if it has a high FCI number? Answer: Yes
⩥ Is self latching hardware required at doors within openings that are
part of the smoke barrier? Answer: No
⩥ How often should fire extinguishers be inspected at an HCF? Answer:
Monthly
⩥ How often should alternate exits caused by an ILSM plan be inspected
during construction? Answer: Daily
⩥ What wall type should separate renovation space from occupied space
in a non-sprinklered? Answer: 1-hour
CHC COMPLETE COMPILATION BUNDLE
EXAMINATION TEST 2026 QUESTIONS
WITH SOLUTIONS GRADED A+
⩥ When should medical equipment modality selections ideally be made
during the planning, design, and construction process? Answer: Before
the end of SDs
⩥ When should medical equipment manufacturer selections ideally be
made for each modality during the planning, design, and construction
process? Answer: Before the end of DDs
⩥ What is a medical equipment modality? Answer: Refers to different
types of imaging equipment
⩥ What are some examples of medical imaging modalities? Answer:
Conventional radiography
Fluoroscopy
Angiography
Mammography
Computed Tomography
Ultrasound and Ultrasound/Doppler
,Magnetic resonance Imaging
Nuclear Medicine
⩥ NFPA 101-2000 details that "primary level of exit discharge of a
building shall be the lowest story whose floor is level with or above
finished grade on the exterior wall line for XX% or more of its
perimeter." Answer: 50%
⩥ Does an MRI machine use radiation to produce its images? Answer:
No, it uses magnetic and radio frequencies
⩥ Does an ultrasound use radiation to produce its images? Answer: No,
it uses sound waves
⩥ What does a CT scan machine use to produce its images? Answer:
Ionizing radiation
⩥ When should ICRA planning be complete when a new construction
project is being built next to an existing building if the two will
eventually connect? Answer: Before construction starts
⩥ Before an employee enters a permit-required confined space, the
internal atmosphere shall be tested with a calibrated direct-reading
instrument for oxygen content and which of the following? Answer:
potential toxic air contaminants, and flammable gases and vapors
, ⩥ What are the 3 main components of the exterior wall system that
keeps moisture out of the building? Answer: weather barrier, air gap,
exterior finish
⩥ What is the best contract type for an owner if a project is only 50%
designed? Answer: cost plus GMP
⩥ Is a facility in bad shape if it has a high FCI number? Answer: Yes
⩥ Is self latching hardware required at doors within openings that are
part of the smoke barrier? Answer: No
⩥ How often should fire extinguishers be inspected at an HCF? Answer:
Monthly
⩥ How often should alternate exits caused by an ILSM plan be inspected
during construction? Answer: Daily
⩥ What wall type should separate renovation space from occupied space
in a non-sprinklered? Answer: 1-hour
