Page |1
Fdny p-99 c of f Questions and Correct
Answers/ Latest Update / Already Graded
What is a general requirement of the location of the installation of a
boiler?
Ans: Adequate clearance from combustile construction
What temperature must the materials remain under during
combustion?
Ans: 170 degrees
What is a requirement for the access of the boiler?
Ans: Access for operation and maintenance must not be
hazardous
What is required upon installation to operate a boiler?
Ans: Inspection and test resulting in equipment use permit
from commissioner
How often should a boiler be inspected?
Ans: Once a year
All rights reserved © 2025/ 2026 |
, Page |2
What documentation is required from a certificate holder?
Ans: Owners annual statement
What is required to hydrostatically test upon installation and who
should perform these tests?
Ans: Liquid fuel piping and fuel oil storage tanks by the
installing contractor
At what pressure should piping be tested?
Ans: 1/2 max working pressure but less than pressure required
for storage tank
At what pressure should oil storage tanks be tested?
Ans: At 1 1/2x max working pressure but never < 25 psi
How long should hydrostatic pressure be maintained?
Ans: Until all joints and connections are inspected for leaks and
at 30 minutes have passed
All rights reserved © 2025/ 2026 |
, Page |3
Who is responsible for testing gas distribution piping?
Ans: Installing contractor before closing and operation
What is described on instruction cards and where are they located?
Ans: Care and operation of oil burner located near the
equipment.
What type of burners require a C of F holder to operate them?
Ans: Any boiler that is not automatic or requires preheating.
What is the license holder responsible for after repair?
Ans: Inspecting the repairs, and functioning of all control
devices and positioning of valves.
What type of heat and combustion equipment are required with the air
pollution control code?
Ans: All burners fire with solid, liquid, or gas. Including rubbish
burners/incinerators.
What temperature are the products of combustion upon exit in low
temperature equipment?
All rights reserved © 2025/ 2026 |
Fdny p-99 c of f Questions and Correct
Answers/ Latest Update / Already Graded
What is a general requirement of the location of the installation of a
boiler?
Ans: Adequate clearance from combustile construction
What temperature must the materials remain under during
combustion?
Ans: 170 degrees
What is a requirement for the access of the boiler?
Ans: Access for operation and maintenance must not be
hazardous
What is required upon installation to operate a boiler?
Ans: Inspection and test resulting in equipment use permit
from commissioner
How often should a boiler be inspected?
Ans: Once a year
All rights reserved © 2025/ 2026 |
, Page |2
What documentation is required from a certificate holder?
Ans: Owners annual statement
What is required to hydrostatically test upon installation and who
should perform these tests?
Ans: Liquid fuel piping and fuel oil storage tanks by the
installing contractor
At what pressure should piping be tested?
Ans: 1/2 max working pressure but less than pressure required
for storage tank
At what pressure should oil storage tanks be tested?
Ans: At 1 1/2x max working pressure but never < 25 psi
How long should hydrostatic pressure be maintained?
Ans: Until all joints and connections are inspected for leaks and
at 30 minutes have passed
All rights reserved © 2025/ 2026 |
, Page |3
Who is responsible for testing gas distribution piping?
Ans: Installing contractor before closing and operation
What is described on instruction cards and where are they located?
Ans: Care and operation of oil burner located near the
equipment.
What type of burners require a C of F holder to operate them?
Ans: Any boiler that is not automatic or requires preheating.
What is the license holder responsible for after repair?
Ans: Inspecting the repairs, and functioning of all control
devices and positioning of valves.
What type of heat and combustion equipment are required with the air
pollution control code?
Ans: All burners fire with solid, liquid, or gas. Including rubbish
burners/incinerators.
What temperature are the products of combustion upon exit in low
temperature equipment?
All rights reserved © 2025/ 2026 |
