Ammo Module 4 Question and
answers correctly solved 2025/2026
Remove or disconnect the drill from the power source - correct answer ✔What safety precaution must
you take before installing or changing a drill bit of an electric drill ?
Use a center punch to mark the exact center of the hole to be drilled - correct answer ✔What do you
do before drilling in metal or other hard surfaces ?
Eye and Face protection - correct answer ✔What minimum personal protective equipment shall be
used for all jobs using a bench grinder ?
At full speed - correct answer ✔How fast should an electric saw blade be spinning before it contacts
the material to be cut ?
Inspect the air hose for cracks or other defects - correct answer ✔List a safety precaution when dealing
with pneumatic tools ?
90 psi - correct answer ✔How many pounds per square inch (psi) are used for safe efficient operation
of a pneumatic tool
Spring loaded ball bearing or socket lock - correct answer ✔What ensures the socket or attachment
does not fly off an impact wrench ?
Reduces the possibility of shearing or damaged threads when installing nuts and bolts - correct answer
✔What does the torque regulator do for pneumatic impact wrench ?
The manual and equipment to be used - correct answer ✔Familiarity of what two things are
prerequisites for safe operation of lifting devices ?
, Protective helmets and steel toed boots - correct answer ✔What will be work if there is a potential for
injury from falling objects or moving equipment ?
Forklift, Jammer, Over head hoist, Crane - correct answer ✔What are four items that can be used in
conjunction with wire-rope slings when lifting munitions ?
DAFMAN 91-203 - correct answer ✔Where can general guidance be found for safe operating
procedures using lifting devices ?
The polarity, condition of the meters battery, whether you are in manual or auto range, and
negativeannunciator for the bar graph - correct answer ✔What information do the multimeter's
annunciators display ?
RANGE and HOLD - correct answer ✔What are the two modes of operation for a Fluke 8025-series
multimeter ?
HOLD mode - correct answer ✔What mode of the Fluke 8025-series multimeter is most useful when
taking measurements in a circuit where it may be necessary to keep your eyes on the test leads after
they are positioned ?
5,500 lbs - correct answer ✔What is the maximum load capacity of the MHU-141 Trailer ?
TO 35D3-2-27-1 - correct answer ✔Which TO contains information on the MHU-141 trailer ?
40 degrees in either direction - correct answer ✔What is the maximum turning angle of the MHU-141
trailer ?
answers correctly solved 2025/2026
Remove or disconnect the drill from the power source - correct answer ✔What safety precaution must
you take before installing or changing a drill bit of an electric drill ?
Use a center punch to mark the exact center of the hole to be drilled - correct answer ✔What do you
do before drilling in metal or other hard surfaces ?
Eye and Face protection - correct answer ✔What minimum personal protective equipment shall be
used for all jobs using a bench grinder ?
At full speed - correct answer ✔How fast should an electric saw blade be spinning before it contacts
the material to be cut ?
Inspect the air hose for cracks or other defects - correct answer ✔List a safety precaution when dealing
with pneumatic tools ?
90 psi - correct answer ✔How many pounds per square inch (psi) are used for safe efficient operation
of a pneumatic tool
Spring loaded ball bearing or socket lock - correct answer ✔What ensures the socket or attachment
does not fly off an impact wrench ?
Reduces the possibility of shearing or damaged threads when installing nuts and bolts - correct answer
✔What does the torque regulator do for pneumatic impact wrench ?
The manual and equipment to be used - correct answer ✔Familiarity of what two things are
prerequisites for safe operation of lifting devices ?
, Protective helmets and steel toed boots - correct answer ✔What will be work if there is a potential for
injury from falling objects or moving equipment ?
Forklift, Jammer, Over head hoist, Crane - correct answer ✔What are four items that can be used in
conjunction with wire-rope slings when lifting munitions ?
DAFMAN 91-203 - correct answer ✔Where can general guidance be found for safe operating
procedures using lifting devices ?
The polarity, condition of the meters battery, whether you are in manual or auto range, and
negativeannunciator for the bar graph - correct answer ✔What information do the multimeter's
annunciators display ?
RANGE and HOLD - correct answer ✔What are the two modes of operation for a Fluke 8025-series
multimeter ?
HOLD mode - correct answer ✔What mode of the Fluke 8025-series multimeter is most useful when
taking measurements in a circuit where it may be necessary to keep your eyes on the test leads after
they are positioned ?
5,500 lbs - correct answer ✔What is the maximum load capacity of the MHU-141 Trailer ?
TO 35D3-2-27-1 - correct answer ✔Which TO contains information on the MHU-141 trailer ?
40 degrees in either direction - correct answer ✔What is the maximum turning angle of the MHU-141
trailer ?
