Certified Safety Professional (CSP) Exam
With Actual Questions & Verified Answers,
Plus Explained Rationales/Expert Verified
For Guaranteed 100% Pass 2026/Latest
Update/Instant Download Pdf
1. Which of the following is the primary purpose of a Job Safety
Analysis (JSA)?
A. To create a work schedule
B. To identify and control hazards in a task
C. To increase employee productivity
D. To document training requirements
B
A JSA systematically identifies hazards in a specific task and
implements controls to prevent accidents.
2. What is the main difference between an engineering control and
an administrative control?
A. Engineering controls eliminate hazards; administrative controls
change the way people work
B. Administrative controls eliminate hazards; engineering controls
increase training
C. Both eliminate hazards
D. Neither affects hazard exposure
A
Engineering controls aim to remove the hazard at its source,
, while administrative controls rely on human behavior
modification.
3. Which OSHA standard sets the permissible exposure limits (PELs)
for hazardous chemicals?
A. 29 CFR 1910.1200
B. 29 CFR 1926.21
C. 29 CFR 1910.1000
D. 29 CFR 1926.50
C
29 CFR 1910.1000 contains OSHA’s PELs for chemical and
physical agents in the workplace.
4. Which of the following is an example of a leading indicator in
safety management?
A. Number of OSHA recordable incidents
B. Number of near misses reported
C. Number of lost-time injuries
D. Workers’ compensation claims
B
Leading indicators measure proactive safety activities, such as
reporting near misses, before an incident occurs.
5. The hierarchy of controls places which method as the most
effective?
A. Personal protective equipment
B. Substitution
C. Administrative controls
D. Training
B
Substitution (replacing a hazard with a less hazardous option) is
higher in the hierarchy than administrative controls or PPE.
,6. Which type of hearing loss is most commonly associated with
chronic exposure to high noise levels?
A. Conductive
B. Sensorineural
C. Mixed
D. Temporary threshold shift
B
Sensorineural hearing loss results from damage to the inner ear
or auditory nerve and is common with long-term noise exposure.
7. What is the primary purpose of a Material Safety Data Sheet
(MSDS), now known as SDS?
A. To provide a company inventory
B. To outline health hazards and safe handling of chemicals
C. To list OSHA inspectors
D. To schedule employee shifts
B
SDSs provide detailed information about chemical hazards,
handling, storage, and emergency measures.
8. Which type of fire extinguisher is appropriate for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
C
Class C extinguishers are designed for fires involving energized
electrical equipment.
9. A risk assessment evaluates hazards by considering:
A. Probability and severity of harm
B. Cost of controls
, C. Employee preferences
D. Legal citations only
A
Risk assessments quantify the likelihood and severity of
potential harm to prioritize controls.
10. Which is the best method to reduce ergonomic injuries in
the workplace?
A. Employee training only
B. Engineering controls such as adjustable workstations
C. Use of PPE
D. Increasing work hours
B
Engineering solutions, like adjustable workstations, directly
reduce ergonomic strain and are more effective than training
alone.
11. The primary purpose of OSHA’s Voluntary Protection
Programs (VPP) is to:
A. Enforce fines
B. Recognize workplaces with exemplary safety programs
C. Train inspectors
D. Reduce insurance premiums only
B
VPP acknowledges employers who implement effective safety
and health management systems beyond compliance.
12. What is the recommended action when an employee is
exposed to a chemical spill?
A. Wait for symptoms
B. Consult the SDS and follow emergency procedures
C. Ignore it if they feel fine
With Actual Questions & Verified Answers,
Plus Explained Rationales/Expert Verified
For Guaranteed 100% Pass 2026/Latest
Update/Instant Download Pdf
1. Which of the following is the primary purpose of a Job Safety
Analysis (JSA)?
A. To create a work schedule
B. To identify and control hazards in a task
C. To increase employee productivity
D. To document training requirements
B
A JSA systematically identifies hazards in a specific task and
implements controls to prevent accidents.
2. What is the main difference between an engineering control and
an administrative control?
A. Engineering controls eliminate hazards; administrative controls
change the way people work
B. Administrative controls eliminate hazards; engineering controls
increase training
C. Both eliminate hazards
D. Neither affects hazard exposure
A
Engineering controls aim to remove the hazard at its source,
, while administrative controls rely on human behavior
modification.
3. Which OSHA standard sets the permissible exposure limits (PELs)
for hazardous chemicals?
A. 29 CFR 1910.1200
B. 29 CFR 1926.21
C. 29 CFR 1910.1000
D. 29 CFR 1926.50
C
29 CFR 1910.1000 contains OSHA’s PELs for chemical and
physical agents in the workplace.
4. Which of the following is an example of a leading indicator in
safety management?
A. Number of OSHA recordable incidents
B. Number of near misses reported
C. Number of lost-time injuries
D. Workers’ compensation claims
B
Leading indicators measure proactive safety activities, such as
reporting near misses, before an incident occurs.
5. The hierarchy of controls places which method as the most
effective?
A. Personal protective equipment
B. Substitution
C. Administrative controls
D. Training
B
Substitution (replacing a hazard with a less hazardous option) is
higher in the hierarchy than administrative controls or PPE.
,6. Which type of hearing loss is most commonly associated with
chronic exposure to high noise levels?
A. Conductive
B. Sensorineural
C. Mixed
D. Temporary threshold shift
B
Sensorineural hearing loss results from damage to the inner ear
or auditory nerve and is common with long-term noise exposure.
7. What is the primary purpose of a Material Safety Data Sheet
(MSDS), now known as SDS?
A. To provide a company inventory
B. To outline health hazards and safe handling of chemicals
C. To list OSHA inspectors
D. To schedule employee shifts
B
SDSs provide detailed information about chemical hazards,
handling, storage, and emergency measures.
8. Which type of fire extinguisher is appropriate for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
C
Class C extinguishers are designed for fires involving energized
electrical equipment.
9. A risk assessment evaluates hazards by considering:
A. Probability and severity of harm
B. Cost of controls
, C. Employee preferences
D. Legal citations only
A
Risk assessments quantify the likelihood and severity of
potential harm to prioritize controls.
10. Which is the best method to reduce ergonomic injuries in
the workplace?
A. Employee training only
B. Engineering controls such as adjustable workstations
C. Use of PPE
D. Increasing work hours
B
Engineering solutions, like adjustable workstations, directly
reduce ergonomic strain and are more effective than training
alone.
11. The primary purpose of OSHA’s Voluntary Protection
Programs (VPP) is to:
A. Enforce fines
B. Recognize workplaces with exemplary safety programs
C. Train inspectors
D. Reduce insurance premiums only
B
VPP acknowledges employers who implement effective safety
and health management systems beyond compliance.
12. What is the recommended action when an employee is
exposed to a chemical spill?
A. Wait for symptoms
B. Consult the SDS and follow emergency procedures
C. Ignore it if they feel fine
