INSTRUMENT STAGE 3 EXAM
If you experience a radio communication failure while on IFR flight
plan in VFR conditions you should - ANSWERS-Remain VFR
conditions and land as soon as practicable
If you experience a radio communication failure while on an IFR
flight plan in IFR conditions at what altitude should you fly? -
ANSWERS-The highest of the last assigned altitude with minimums
altitude for IFR operations or the altitude ATC has advised you to
expect in a further clearance
After turning final on a no-gyro approach the controller expects you
to make all turns at - ANSWERS-One-half standard rate
At the DA, the pilot does not have the runway environment in sight.
After adding power to perform the missed approach and beginning to
climb, he sees a break in the clouds ahead and thinks " if I cut power
and descend quickly, I might be able to see the runway and still land"
what hazardous attitude is the pilot showing? - ANSWERS-
Impulsivity
Which is an example of step in the ADM process that the pilot did not
effectively perform? - ANSWERS-Define the problem- the pilot
failed to define the problem as malfunctioning avionics equipment
that could affect his ability to perform an ILS approach and fly safety
under IFR conditions
, What are three risks that the pilot could have recognized and
mitigated using the 5Ps - ANSWERS-Pilot: training/ experience- the
pilot did not perform instrument approaches procedures well on a
recent check flight
Programming: avionics airworthiness- the avionics equipment was not
working properly
Plan: mission-the pilot felt pressure to complete the flight
What actions could you take to manage tasks and maintain situational
awareness prior and during an instrument approach to help prevent
this type of accidents - ANSWERS-Follow standard operating
procedures such as approach briefings, using avionics flows and
performing the 5P check and request assistance from ATC in the event
of an equipment malfunction
What resources can you use to determine if a preferred IFR route is
available for a specific flight? - ANSWERS-Chart supplement and
jeppesen airway manual
What is the major motivating force causing atmospheric circulation? -
ANSWERS-Uneven heatingof the earth's surface
What processes result in moisture being added to unsaturated air? -
ANSWERS-Evaporation and sublimation
A small or converging temperature/ dew point spread usually results
in - ANSWERS-Fog or low clouds
If you experience a radio communication failure while on IFR flight
plan in VFR conditions you should - ANSWERS-Remain VFR
conditions and land as soon as practicable
If you experience a radio communication failure while on an IFR
flight plan in IFR conditions at what altitude should you fly? -
ANSWERS-The highest of the last assigned altitude with minimums
altitude for IFR operations or the altitude ATC has advised you to
expect in a further clearance
After turning final on a no-gyro approach the controller expects you
to make all turns at - ANSWERS-One-half standard rate
At the DA, the pilot does not have the runway environment in sight.
After adding power to perform the missed approach and beginning to
climb, he sees a break in the clouds ahead and thinks " if I cut power
and descend quickly, I might be able to see the runway and still land"
what hazardous attitude is the pilot showing? - ANSWERS-
Impulsivity
Which is an example of step in the ADM process that the pilot did not
effectively perform? - ANSWERS-Define the problem- the pilot
failed to define the problem as malfunctioning avionics equipment
that could affect his ability to perform an ILS approach and fly safety
under IFR conditions
, What are three risks that the pilot could have recognized and
mitigated using the 5Ps - ANSWERS-Pilot: training/ experience- the
pilot did not perform instrument approaches procedures well on a
recent check flight
Programming: avionics airworthiness- the avionics equipment was not
working properly
Plan: mission-the pilot felt pressure to complete the flight
What actions could you take to manage tasks and maintain situational
awareness prior and during an instrument approach to help prevent
this type of accidents - ANSWERS-Follow standard operating
procedures such as approach briefings, using avionics flows and
performing the 5P check and request assistance from ATC in the event
of an equipment malfunction
What resources can you use to determine if a preferred IFR route is
available for a specific flight? - ANSWERS-Chart supplement and
jeppesen airway manual
What is the major motivating force causing atmospheric circulation? -
ANSWERS-Uneven heatingof the earth's surface
What processes result in moisture being added to unsaturated air? -
ANSWERS-Evaporation and sublimation
A small or converging temperature/ dew point spread usually results
in - ANSWERS-Fog or low clouds
