AFAB 110 FINAL EXAM
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
The word print can best be used the same as the word _____________ANSWER- Drawing
In many cases, the print is also an important part of a _______________ in the industrial
setting.ANSWER- Contract
The study of print reading is closely related to the study of _____________, the general
term for creating drawings of objects in technical fields.ANSWER- Drafting
PDF is an electronic file format that allows the user to share a drawing or image without
giving them the actual CAD data file. PDF stands for __________________.ANSWER-
Portable Document Format
A voluntary guideline that establishes the method of representation for prints, as well as
other engineering practices, is a ________________.ANSWER- Standard
Identify the line below that is fictitious.ANSWER- Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n) ___________ on
each end of the line.ANSWER- Arrowhead
Identify the line below that is to be drawn thick.ANSWER- Cutting-plane line
The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________.ANSWER- Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task involves
two principal elements: visualization and _____________.ANSWER- Interpretation
, If a D-size sheet of paper is properly cut, how many A-size sheets should result?ANSWER-
8
For which of the following is least likely to be found on a basic parts list?ANSWER- Finish
A block that is important to read in the early stage of examining a print is the ___________
block, which helps determine if the print being observed is up-to-date.ANSWER- Revision
history
Which of the following is least likely to be found on a basic parts list?ANSWER- Finish
The word that basically means "cut in half" is _______________.ANSWER- Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to the term
__________.ANSWER- Across-the-corners
In most CAD systems, the basic geometric forms used to create complex models are
referred to as _______________.ANSWER- Primitives
As lines are parallel to each other, arcs are ________________ to each other.ANSWER-
Concentric
Which of the following is a way to describe the point of tangency between two
circles?ANSWER- Found on a line connecting the two center points
Which of the following cannot be defined by the way a plane intersects a cone?ANSWER-
Ogee curve
Which of the following is not an example of a spatial visualization instrument?ANSWER-
Playing 3D tic-tac-toe
There are three dimension terms common to drafting education. Which of the following is
not correct?ANSWER- Length
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
The word print can best be used the same as the word _____________ANSWER- Drawing
In many cases, the print is also an important part of a _______________ in the industrial
setting.ANSWER- Contract
The study of print reading is closely related to the study of _____________, the general
term for creating drawings of objects in technical fields.ANSWER- Drafting
PDF is an electronic file format that allows the user to share a drawing or image without
giving them the actual CAD data file. PDF stands for __________________.ANSWER-
Portable Document Format
A voluntary guideline that establishes the method of representation for prints, as well as
other engineering practices, is a ________________.ANSWER- Standard
Identify the line below that is fictitious.ANSWER- Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n) ___________ on
each end of the line.ANSWER- Arrowhead
Identify the line below that is to be drawn thick.ANSWER- Cutting-plane line
The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________.ANSWER- Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task involves
two principal elements: visualization and _____________.ANSWER- Interpretation
, If a D-size sheet of paper is properly cut, how many A-size sheets should result?ANSWER-
8
For which of the following is least likely to be found on a basic parts list?ANSWER- Finish
A block that is important to read in the early stage of examining a print is the ___________
block, which helps determine if the print being observed is up-to-date.ANSWER- Revision
history
Which of the following is least likely to be found on a basic parts list?ANSWER- Finish
The word that basically means "cut in half" is _______________.ANSWER- Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to the term
__________.ANSWER- Across-the-corners
In most CAD systems, the basic geometric forms used to create complex models are
referred to as _______________.ANSWER- Primitives
As lines are parallel to each other, arcs are ________________ to each other.ANSWER-
Concentric
Which of the following is a way to describe the point of tangency between two
circles?ANSWER- Found on a line connecting the two center points
Which of the following cannot be defined by the way a plane intersects a cone?ANSWER-
Ogee curve
Which of the following is not an example of a spatial visualization instrument?ANSWER-
Playing 3D tic-tac-toe
There are three dimension terms common to drafting education. Which of the following is
not correct?ANSWER- Length
