AFAB 110 FINAL PAPER 2026
COMPREHENSIVE Q&A GRADED A+
◍ There are three dimension terms common to drafting education.
which of the following is not correct?. Answer: Length
◍ The type of section view where the section view is no longer
aligned in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset. Answer: offset
◍ Cylindrical object with an odd number of features, such as spokes
or holes on a bolt circle, could be better described with a ---- section..
Answer: Aligned
◍ The broken-out section requires another type of line from the
alphabet of lines to help show where the removed portion was broken
off in a jagged sort of way. this is the --- line.. Answer: Short break
◍ When a --- section is created, it can be overlaid on the view or short
break lines can be used on each side of th e view to seperate it from
the other visible lines.. Answer: Revolved
, ◍ Type of section wherein the section view is probably located out of
projection with the other regular or auxiliary views is a --- section..
Answer: Removed
◍ There is a conventional practice that allows the drafter to leave a
feature unhatched, even though the cutting-plane line passes through
it. Which of the following is not relevent to this conventional
practice?. Answer: Hole
◍ If there is a large area that needs to receive section lines, the ____
section allows for the section lines to only be applied around the
perimeter.. Answer: outline
◍ In assembly drawings, there may be some parts that do not receive
section lines, but rather the area cut by the cutting-plane line is filled-
in solid. Which of the following is not relevant to this conventional
practice?. Answer: Springs
◍ T/F each type of line in the standards has one, and only one, option
for its appearance.. Answer: False
◍ t/f In recent years, the standards have only recommended two line
weights: thick and thin.
. Answer: True
◍ T/F Sometimes, hidden lines are omitted on complex views when
the drawing is clear without them.. Answer: true
COMPREHENSIVE Q&A GRADED A+
◍ There are three dimension terms common to drafting education.
which of the following is not correct?. Answer: Length
◍ The type of section view where the section view is no longer
aligned in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset. Answer: offset
◍ Cylindrical object with an odd number of features, such as spokes
or holes on a bolt circle, could be better described with a ---- section..
Answer: Aligned
◍ The broken-out section requires another type of line from the
alphabet of lines to help show where the removed portion was broken
off in a jagged sort of way. this is the --- line.. Answer: Short break
◍ When a --- section is created, it can be overlaid on the view or short
break lines can be used on each side of th e view to seperate it from
the other visible lines.. Answer: Revolved
, ◍ Type of section wherein the section view is probably located out of
projection with the other regular or auxiliary views is a --- section..
Answer: Removed
◍ There is a conventional practice that allows the drafter to leave a
feature unhatched, even though the cutting-plane line passes through
it. Which of the following is not relevent to this conventional
practice?. Answer: Hole
◍ If there is a large area that needs to receive section lines, the ____
section allows for the section lines to only be applied around the
perimeter.. Answer: outline
◍ In assembly drawings, there may be some parts that do not receive
section lines, but rather the area cut by the cutting-plane line is filled-
in solid. Which of the following is not relevant to this conventional
practice?. Answer: Springs
◍ T/F each type of line in the standards has one, and only one, option
for its appearance.. Answer: False
◍ t/f In recent years, the standards have only recommended two line
weights: thick and thin.
. Answer: True
◍ T/F Sometimes, hidden lines are omitted on complex views when
the drawing is clear without them.. Answer: true
