1|Page
IMSA TRAFFIC SIGNAL TECHNICIAN LEVEL 1 PRACTICE EXAM ALL
QUESTIONS AND CORRECT ANSWERS/ VERIFIED AND MOST RECENT
EDITION 2024/2025 GRADED A+
1. What is the primary function of the IMAS?
- ANSWER: Safety Education
2. IMSA Stands for
- ANSWER: International Municipal Signal Association
3. The advanced transportation controller was developed to provide
- ANSWER:
Open architecture hardware and software platform
4. Which of the following type of controller assemblies, without adapters,
can accept multiple software platforms and be utilized in all types fo
cabinets:
- ANSWER: 2070 controller
5. What is another term for load switches used in 170/2070 controllers?
- ANSWER:
switch packs
6. Which type of controller was introduced to supersede the 170 controller?
-
ANSWER: 2070 controller
7. the NEMA TS-2 standards cover the same items as the TS-1 standards but
expand the requirements to include which of the following:
- ANSWER: Treatment fo signal preemption
https://www.stuvia.com/user/MBOFFIN
, 8. What is NOT part of an underground power service:
- ANSWER: Conduit rise with weatherhead
https://www.stuvia.com/user/MBOFFIN
, 2|Page
9. Two common types of signal pole installations are - ANSWER: Direct buried
and foundation
10. The first type of testing performed on a controller cabinet assembly is -
ANSWER: bench test
11. Which of the following is NOT an IMSA certification? - ANSWER: Traffic
Signal Level III Bridge Technician
12. Which of the following are potential safety hazards? - ANSWER: overhead
and underground power, gas, aerial lift equipment. Tra
13. What are the sections of a ramp mete signal - ANSWER: Circular red,
circular green
14. PPE stands for - ANSWER: Personal Protective Equipment
15. A work zone supervisor is responsible for which of the following tasks: -
ANSWER: Ensure advance warning devices have not been removed or
relocated.
16. Which of the following is NOT a sentence type in the MUTCD?
Standards; requirement that have to be followed.
Guidance; recommendations that are to be followed unless there I good
reason not to.
Objectives; reasons behind the standards and guidance.
Support; additional information to clarify the standards and guidance. -
ANSWER:
Objectives; reasons behind the standards and guidance
https://www.stuvia.com/user/MBOFFIN
IMSA TRAFFIC SIGNAL TECHNICIAN LEVEL 1 PRACTICE EXAM ALL
QUESTIONS AND CORRECT ANSWERS/ VERIFIED AND MOST RECENT
EDITION 2024/2025 GRADED A+
1. What is the primary function of the IMAS?
- ANSWER: Safety Education
2. IMSA Stands for
- ANSWER: International Municipal Signal Association
3. The advanced transportation controller was developed to provide
- ANSWER:
Open architecture hardware and software platform
4. Which of the following type of controller assemblies, without adapters,
can accept multiple software platforms and be utilized in all types fo
cabinets:
- ANSWER: 2070 controller
5. What is another term for load switches used in 170/2070 controllers?
- ANSWER:
switch packs
6. Which type of controller was introduced to supersede the 170 controller?
-
ANSWER: 2070 controller
7. the NEMA TS-2 standards cover the same items as the TS-1 standards but
expand the requirements to include which of the following:
- ANSWER: Treatment fo signal preemption
https://www.stuvia.com/user/MBOFFIN
, 8. What is NOT part of an underground power service:
- ANSWER: Conduit rise with weatherhead
https://www.stuvia.com/user/MBOFFIN
, 2|Page
9. Two common types of signal pole installations are - ANSWER: Direct buried
and foundation
10. The first type of testing performed on a controller cabinet assembly is -
ANSWER: bench test
11. Which of the following is NOT an IMSA certification? - ANSWER: Traffic
Signal Level III Bridge Technician
12. Which of the following are potential safety hazards? - ANSWER: overhead
and underground power, gas, aerial lift equipment. Tra
13. What are the sections of a ramp mete signal - ANSWER: Circular red,
circular green
14. PPE stands for - ANSWER: Personal Protective Equipment
15. A work zone supervisor is responsible for which of the following tasks: -
ANSWER: Ensure advance warning devices have not been removed or
relocated.
16. Which of the following is NOT a sentence type in the MUTCD?
Standards; requirement that have to be followed.
Guidance; recommendations that are to be followed unless there I good
reason not to.
Objectives; reasons behind the standards and guidance.
Support; additional information to clarify the standards and guidance. -
ANSWER:
Objectives; reasons behind the standards and guidance
https://www.stuvia.com/user/MBOFFIN
