ANSWERS|LATEST!!!!2025/2026|GUARANTEED
N - ANSWER No requirement has been established for this Class, but may require
separate criteria as agreed between the Manufacturer and User
A - ANSWER Acceptable
P - ANSWER Process Indicator
D - ANSWER Defect
Defects shall be identified, documented, and dispositioned - ANSWER [D1D2D3]
Hardware found to be produced using materials or processes that do not conform to this
standard shall be classified as defects - ANSWER [D1D2D3]
Mounting and soldering for specialized processes not specified herein shall be performed in
accordance with documented procedures - ANSWER [N1D2D3]
The external interconnect points, e.g. terminals, pins, shall meet the solderability
requirements of 4.1 Solderability - ANSWER [D1D2D3]
There shall be no broken strands for wires used at a potential of 6kV or greater -
ANSWER [D1D2D3]
1
N - ANSWER No requirement has been established for this Class, but may require
separate criteria as agreed between the Manufacturer and User
A - ANSWER Acceptable
P - ANSWER Process Indicator
D - ANSWER Defect
Defects shall be identified, documented, and dispositioned - ANSWER [D1D2D3]
Hardware found to be produced using materials or processes that do not conform to this
standard shall be classified as defects - ANSWER [D1D2D3]
Mounting and soldering for specialized processes not specified herein shall be performed in
accordance with documented procedures - ANSWER [N1D2D3]
The external interconnect points, e.g. terminals, pins, shall meet the solderability
requirements of 4.1 Solderability - ANSWER [D1D2D3]
There shall be no broken strands for wires used at a potential of 6kV or greater -
ANSWER [D1D2D3]
1