PIPE FITTER TEST LATEST
what does T.O.E stand for? - ANSWERS-thread one end
what does BLETSE stand for? - ANSWERS-bevel large end/thread
small end
tools that require hearing protection when used are: - ANSWERS-
chipping gun, side grinder, air impact
items to look for on a bench grinder before use are: - ANSWERS-
cracked wheel, tool rest within "1/8" of wheel, tongue guard attatched
if you wanted to reduce in a line but keep the same center line, you
would use an eccentric reducer - ANSWERS-false
the 2 most commonly used types of tubing connections are compression
and flared. - ANSWERS-true
a pressure indicator is indicated by a Pi symbol on a flow chart -
ANSWERS-true
END OF
PAGE 1
, PIPE FITTER TEST LATEST
a pressure indicator is indicated by a PI symbol on a flow chart -
ANSWERS-true
spray painting or modifying hard hats may damage them - ANSWERS-
true
pipe stamped with 316L and 304L denotes a grade or type of a carbon
steel pipe and fittings. - ANSWERS-false
flange insulators Kits are installed for a cathodic protection -
ANSWERS-true
the proper way to lift is bend at your knees and let you legs do the lifting
- ANSWERS-true
exposure to high level noises can be controlled - ANSWERS-true
to reduce chances of heat stress you should drink plenty of beet and
alcohol - ANSWERS-false
a temperature indicator is indicated by a TI symbol on a flow chart -
ANSWERS-true
END OF
PAGE 2
what does T.O.E stand for? - ANSWERS-thread one end
what does BLETSE stand for? - ANSWERS-bevel large end/thread
small end
tools that require hearing protection when used are: - ANSWERS-
chipping gun, side grinder, air impact
items to look for on a bench grinder before use are: - ANSWERS-
cracked wheel, tool rest within "1/8" of wheel, tongue guard attatched
if you wanted to reduce in a line but keep the same center line, you
would use an eccentric reducer - ANSWERS-false
the 2 most commonly used types of tubing connections are compression
and flared. - ANSWERS-true
a pressure indicator is indicated by a Pi symbol on a flow chart -
ANSWERS-true
END OF
PAGE 1
, PIPE FITTER TEST LATEST
a pressure indicator is indicated by a PI symbol on a flow chart -
ANSWERS-true
spray painting or modifying hard hats may damage them - ANSWERS-
true
pipe stamped with 316L and 304L denotes a grade or type of a carbon
steel pipe and fittings. - ANSWERS-false
flange insulators Kits are installed for a cathodic protection -
ANSWERS-true
the proper way to lift is bend at your knees and let you legs do the lifting
- ANSWERS-true
exposure to high level noises can be controlled - ANSWERS-true
to reduce chances of heat stress you should drink plenty of beet and
alcohol - ANSWERS-false
a temperature indicator is indicated by a TI symbol on a flow chart -
ANSWERS-true
END OF
PAGE 2
