Elevators 800\\NEIEP Elevators 800 Study
Guide – Tips for Passing the Final Exam
Electric
Containing, producing, arising from, or actuated by electricity.
core
Center of the earth
What is the maximum platform area for a residential elevator
15sq.ft
For a residential platform lift the governor shall set at a maximum speed of
75fpm
What is the term for a space that a vertical platform lift occupies?
Runway
Runway 4. When may ANSI A 10,4 for Rack and installations?
When it is used a personnel lift during construction
5. After finding a hydraulic elevator with its low timer tripped, which of the following items should be
suspec
Slipping pump belts
Which rigging equipment would provide the best control for restraining horizontal movement of
escalators as it is being lifted into position in the well way?
Lever hoist
Routine period test and inspections are made at intervals no longer than_________for lula in
buildings other than private residences and no longer than _______ for private residents as described
in a18.1
6 months, 1year
Why is it important to follow a welding procedure using a sequence of short welds on opposite sides
of the cylinder
To prevent warping the cylinder
Conventional pumps usually belt driven, while submersible pumps always_____
Direct coupled
Guide – Tips for Passing the Final Exam
Electric
Containing, producing, arising from, or actuated by electricity.
core
Center of the earth
What is the maximum platform area for a residential elevator
15sq.ft
For a residential platform lift the governor shall set at a maximum speed of
75fpm
What is the term for a space that a vertical platform lift occupies?
Runway
Runway 4. When may ANSI A 10,4 for Rack and installations?
When it is used a personnel lift during construction
5. After finding a hydraulic elevator with its low timer tripped, which of the following items should be
suspec
Slipping pump belts
Which rigging equipment would provide the best control for restraining horizontal movement of
escalators as it is being lifted into position in the well way?
Lever hoist
Routine period test and inspections are made at intervals no longer than_________for lula in
buildings other than private residences and no longer than _______ for private residents as described
in a18.1
6 months, 1year
Why is it important to follow a welding procedure using a sequence of short welds on opposite sides
of the cylinder
To prevent warping the cylinder
Conventional pumps usually belt driven, while submersible pumps always_____
Direct coupled
